Mfɛnsere a ɛtwetwe ma owia dan

Afiewuranom ani gye mfɛnsere a ɛtwetwe nneɛma a wɔde yɛ owia dan ho adwuma ho efisɛ ɛma abɔde mu hann yɛ kɛse na ɛma mframa kɔ so kɔ. Wɔn adwumayɛ a ɛkɔ soro yiye no mma wonnya baabi a ɛsom bo wɔ dan no mu ne abrannaa so. Sɛ́ ebia wɔresakra abrannaa a wɔakata so anaasɛ wɔreyɛ owia dan a ɛyɛ fɛ a wɔde mmere anan gu mu no, saa mfɛnsere nhyehyɛe ahorow a wotumi de di dwuma pii yi ma wotumi hu mmeae a ɛtrɛw bere a ɛma ahoɔden a wɔde di dwuma yiye no kɔ so yɛ adwuma yiye no. Aluminium ano aduru a ɛyɛ adwuma yiye a efi adwumayɛfo atitiriw te sɛ Derchi mfɛnsere ne ɔpon boa ma wɔdan adansi ho anisoadehu a ɛhyerɛn ma ɛbɛyɛ mmeae a ahobammɔ wom na ɛhɔ yɛ fɛ a wobetumi anya mu anigye afe mũ no nyinaa.

Nneɛma Titiriw a Wɔde Kɔ

• Mfɛnsere a ɛtwetwe no nsɛe baabi na ɛma abɔde mu hann yɛ kɛse a ɛma wotumi hu baabiara a emu da hɔ.

• Aluminium nnua a abubu wɔ ɔhyew mu no ma ɔdan no boa denneennen na ɛko tia wim tebea kɛse.

• Multi-pane glass a Low-E coatings wom no ma ahoɔden ho ka so tew na esiw dede a ɛwɔ abɔnten ano.

• Track a wobɛhohoro daa ne nsɔano nhwehwɛmu a ɛnyɛ den ma wo mfɛnsere no twetwe yiye.

Mfaso a ɛwɔ Sliding Windows so ma Sunroom Projects

Afiewuranom hwehwɛ akwan a wɔbɛfa so anya ahotɔ ne abɔde mu hann kɛse wɔ wɔn afie ntrɛwmu mu bere nyinaa. Paw a wɔpaw mfɛnsere a ɛtwetwe ma owia dan mu nneɛma a wɔde ka ho no ma atrae no nyinaa yɛ yiye a ɔmmɔ mmɔden biara. Saa mfɛnsere nhyehyɛe ahorow yi de abɔnten so nneɛma a ɛnyɛ den ne wim tebea ho ahobammɔ a wotumi de ho to so frafra.

Panoramic Views ne Hann a Wɔbɛma Ayɛ Kɛse

Mfɛnsere a ɛtwetwe nneɛma no wɔ ahwehwɛ a ɛtrɛw a ɛdan owia dan atitiriw no yɛ mmeae kronkron a ɛhyerɛn. Slim profile frames yi mfinimfini dan no akwanside ahorow fi hɔ, enti awia hann hyɛ dan no ntwea biara ma. Afiewuranom nya kwan a ɛda adi pefee a wɔde wɔn ani hu wɔn turo ne nsase a atwa ho ahyia no.

Mfɛnsere a wɔayɛ no daa no taa de nnua a ɛyɛ den a ɛmma wontumi nhu abɔnten di dwuma. Nea ɛne eyi bɔ abira no, . aluminium mfɛnsere a ɛyɛ tratraa a ɛtwetwe no ma wonya mfaso horow a emu da hɔ ma hann a wɔde fa kwan so:

Sɛ wopaw mfɛnsere a ɛyɛ fɛ a ɛtwetwe nneɛma ma owia dan nhyehyɛe a, ɛma anyinam ahoɔden kanea ho ka so tew wɔ awiabere. Ahwehwɛ a ɛtrɛw twa owia hann yiye wɔ bere biara mu.

Mframa a Ɛkɔ Akyirikyiri a Ɛmma Ahunmu Nsɛe

Amanne kwan so mfɛnsere a wɔde adum ayɛ no wosow kɔ abɔnten, bere a apon a wɔtra mu no bue kɔ mu. Nneɛma abien no nyinaa gye ahinanan a ɛsom bo wɔ abɔnten abrannaa so anaasɛ owia dan nketewa nhyehyɛe mu. Mfɛnsere a ɛtwetwe a ɛkɔ soro no di ahunmu haw yi ho dwuma koraa. Ahwehwɛ a wotumi de di dwuma no fa ase akwan a wɔaka abom wɔ frame no mu no so yiye.

Afotu a Wɔde Yɛ Nneɛma: Akwan a ɛkɔ soro ma afiewuranom tumi de dan mu nneɛma, afifide gyinabea, ne nkongua a wɔkenkan si ahwehwɛ no so pɛɛ a ɛrensiw mfɛnsere dwumadi kwan.

Saa kankyee a ɛmma baabi nsɛe yi ma fam nhyehyɛe ahorow a ɛwɔ dan no mu no mu da hɔ koraa. Abansoro dan mu nneɛma a ɛwɔ abɔnten no betumi atra ɔfasu no nkyɛn pɛɛ a ɛrensiw mfɛnsere a wɔabue ano no kwan. Afiewuranom ani gye mframa a wɔbɛkɔ so ahwɛ so denam nnua a wɔde twitwiw nneɛma no benkum anaa nifa ara kwa so.

Porch Nsakraeɛ ne Multi-Sash Nneɛma a Wɔpaw

Sɛ wɔbɛdan abrannaa a wɔakata so dedaw no ayɛ no baabi a wɔde mmere anan atra mu a, ɛhwehwɛ sɛ wɔyɛ mfɛnsere a wɔde di dwuma wɔ akwan horow so. Wɔn a wɔyɛ nneɛma te sɛ Derchi mfɛnsere ne apon nsaanodwuma yɛ amanne kwan so 2-sash, 3-sash, ne 4-sash horizontal sliding systems ma saa nsiesie pɛpɛɛpɛ yi.

Saa sash nhyehyɛe ahorow a ɛyɛ mmerɛw yi de adwumayɛ mu mfaso soronko ma:

• Maximum Airflow Control: Multi-sash nhyehyeɛ ma afiewuranom bue kɔsi 50% anaa nea ɛboro saa wɔ mfɛnsere fasuo no nyinaa mu ma mframa foforɔ.

• Nkoekoemmoa ne mmoawa a wɔsɛe nnɔbae ho banbɔ: Nnuru a wɔde nhama ayɛ a emu yɛ duru a wɔaka abom no mma mmoawa ntumi nkɔ mu bere a mframa a ɛkɔ mu nyinaa kɔ so no.

• Wim Tebea a Ɛko Tia: Rɔba gasket a wɔayɛ no pɛpɛɛpɛ ne wim tebea ho nhama no siw osu, mfutuma, ne awɔw bere mu nsu a ɛyɛ nwini a mframa de ba no ano.

Saa ahwehwɛ a ɛtwetwe a ɛwɔ nhama pii yi ma adansifo tumi to abrannaa a wɔabue mu no mu yiye. Afiewuranom nya dan a ɛyɛ den a owia ahyɛ mu ma a ɛma wotumi hwɛ wim tebea so yiye afe mũ no nyinaa.

Frame Nneɛma a Wɔpaw ma Sunroom Structures

Sɛ wopaw ɔdan a ɛfata a, ɛkyerɛ sɛnea ahwehwɛ a wɔde abɔ ho ban biara mu ahoɔden, nkwa nna, ne fɛ. Nnɛyi owia dan a wɔayɛ no hwehwɛ sɛ wɔde nneɛma a ɛboa ahwehwɛ a emu yɛ duru bere a ɛma wotumi hwɛ ɔhyew so yiye no. ️

Aluminium Frames a Ɔhyew Abubu

Manufacturers te sɛ Derchi mfɛnsere ne ɔpon design amanne 6063-T5 aluminium profiles pɔtee ma ahwehwɛ akɛse installations. Ɛnyɛ den sɛ dade a wɔde di dwuma daa no bɛma ɔhyew akɔ, nanso nhyehyɛe ahorow a ɔhyew abubu no di asɛm yi ho dwuma koraa.

• Polyamide Insulation Strips: Polyamide resin strips a ɛnyɛ nea ɛde nsu kɔ mu no tetew dade afã horow a ɛwɔ mu ne akyi no mu.

• Heat Transfer Barrier: Saa insulation layer yi siw conductive thermal flow wɔ dade frame no so.

• Condensation Control: Nneɛma a ɛwɔ mu a ɛyɛ hyew no mma nsu ntumi nkɔ soro bere a awɔw wom.

Saa nneɛma a ɛyɛ adwuma yiye yi ma ofie mu nneɛma yɛ fɛ wɔ ahohuru bere a ɛyɛ hyew ne awɔw bere a awɔw wom mu.

Vinyl ne Composite a Wɔpaw

Afiewuranom taa fa aluminium frame toto vinyl anaa nnua a wɔde si ananmu a wɔtaa de di dwuma ho. Bere a vinyl ma ɔhyew a ɛfata a ɛmma mframa ntumi nkɔ mu no, aluminium ma mfɛnsere afasu akɛse yɛ ahoɔden a ɛkorɔn koraa wɔ dan mu.

Aluminium a abubu wɔ ɔhyew mu no ne vinyl a ɛyɛ hyew a ɛyɛ adwuma yiye no hyia bere a ɛde profile designs a ɛyɛ fɛ kɛse ma no.

Structural Durability ne Wim Tebea a Ɛko Tia

Aluminium profiles a ɛkorɔn a ɛyɛ mmerɛw gyina nneɛma a atwa yɛn ho ahyia tebea horow a emu yɛ den ne ahum nhyɛso ano. Advanced 70% PVDF resin powder coatings gyina bɛboro nnɔnhwerew 2,000 a wɔde sɔ nkyene a wɔde petepete so hwɛ wɔ ASTM B117 gyinapɛn ahorow ase a ɛnsɛe.

Adwumayɛ Metric: Premium 6063-T5 aluminium frames de honam fam ahoɔden soronko ma:

• Ahoɔden a ɛsua koraa: 186 MPa (27,000 psi) .

• Ahoɔden a Ɛma Aba: 145 MPa (21,000 psi) .

• Mframa Adesoa Tumi: Ɛkɔ 3 kPa

Aluminium frame afasu a ɛyɛ den a ɛwɔ adan pii no twetwe nhyɛso a ɛba tẽẽ wɔ wim tebea a emu yɛ den mu. Afiewuranom nya ahoɔden a ɛtra hɔ kyɛ, nsiesie pii, na ahobammɔ koraa wɔ adan a wɔde si dan mu ma wɔn owia dan no.

Glass ne Ahoɔden a Wɔde Di Dwuma Yiye Ano Aduru

Smart glass selection dan owia dan biara ma ɛbɛyɛ beae a ahotɔ wom afe mũ no nyinaa. Ahwehwɛ a wɔde ahyɛ mu a ɛyɛ adwuma yiye ma dan mu hyew yɛ nea ɛyɛ den bere a ahohuru bere mu ɔhyew a ɛrehyew ne awɔw bere mu mframa a ɛyɛ nwini no. ☀️

Glazing a ɛwɔ afã abien ne abiɛsa

Nnɛyi dan a wɔde owia ayɛ no de wɔn ho to ahwehwɛ a wɔde siw ano (IGU) so sen sɛ wɔde wɔn ho bɛhyɛ ahwehwɛ a wɔde ayɛ ntama biako so. Wɔn a wɔyɛ no de ahwehwɛ abien anaa abiɛsa bom na mframa a ɛwɔ ntam no hyɛ mu.

[Ahwehwɛ a Ɛwɔ Abɔnten] + [Gas Ahunmu] + [Mfinimfini Ahwehwɛ] + [Gas Ahunmu] + [Ahwehwɛ a Ɛwɔ Mfinimfini] = Triple-Pane IGU

• Double-Pane IGUs: Saa units yi yɛ adwuma yiye ma standard three-season sunrooms wɔ wim tebea a ɛyɛ mmerɛw mu.

• Triple-Pane IGUs: Saa akuw yi ma nneɛma a ɛbɔ ho ban kɛse ma owia dan a wɔde bere anan gu mu wɔ atifi fam mmeae a awɔw wom.

Mfɛnsere a ɛwɔ afã abiɛsa no ma akwanside abien a ɛsono emu biara a ɛmma mframa nkɔ mu. Wɔkyere ɔhyew wɔ mu wɔ awɔw bere mu na wɔma owia hyew boro so wɔ abɔnten wɔ awɔw bere mu.

Low-E Coatings ne Argon Gas a Wɔde Hyehyɛ Mu

Dade nketenkete a wɔde kata ahwehwɛ so no siw ultraviolet mframa a epira ne ɔhyew a ɛhyerɛn ano. Nneɛma a wɔde kata so a ɛba fam no da owia hann a ɛyɛ hyew adi kɔ akyirikyiri wɔ awɔw bere mu. Wɔsan de ɔhyew a ɛwɔ dan no mu no san kɔ dan no mu wɔ awɔw bere mu.

Argon mframa a aniwa nhu hyɛ baabi a wɔatoto mu wɔ ahwehwɛ ntam no ma. Argon de ɔhyew a ɛba fam koraa sen wim mframa a ɛyɛ daa no.

Adwumayɛ a Wɔagye Din: DERCHI mfɛnsere nhyehyɛe ahorow no di NFRC ne CE gyinapɛn a ɛyɛ katee so. Wɔn mfɛnsere a ɛtwetwe ahoɔden a ɛnyɛ adwuma yiye no nya U-Factor dodow a ɛba fam a ɛwɔ 0.27 ne 0.32 ntam, na ɛtew ɔhyew ne onwini ho ka a wɔbɔ ɔsram biara no so kɛse.

Multi-Point Sealing ne Nnyigyei a Wɔde Siw Nnyigyei ano

Mfɛnsere mu nsɔano a ɛyɛ den di dwuma titiriw wɔ ahoɔden a wɔkora so mu. Kɔ anim mfɛnsere a ɛtwetwe nhyehyɛe ahorow de mfiri a wɔde to nneɛma pii mu a ɛtwe ahwehwɛ nhama denneennen na ɛko tia frame weatherstripping di dwuma.

• Mframa a Ɛtɔ So Tew: Nsɔano a wɔde nhyɛso a emu yɛ den siw nsu a ɛyɛ nwini ne osu a mframa de ba no ano koraa.

• Acoustic Dampening: IGU ahorow a wɔatoto mu mprenu no ma dede a efi abɔnten no so tew decibel 30 kosi 35.

Saa nsɔano a emu yɛ duru yi siw kar dede a adagyew nnim ne mpɔtam hɔ nnyigyei ano. Afiewuranom nya dan mu kronkronbea a ɛhɔ yɛ komm na asomdwoe wom a wim tebea ho ahobammɔ koraa wom.

Sunroom Mfɛnsere a Wosusuw na Wɔde Sisi Mu

Nsusuwii a ɛfata ne sɛnea wɔde si hɔ pɛpɛɛpɛ no ma awerɛhyem sɛ ɛte saa owia dan mu mfɛnsere a ɛtwetwe no yɛ adwuma yiye mfe du du pii. Ahwɛyiye a wosiesie no mma wontumi nyɛ adan no mu nsakrae a ɛho ka yɛ den bere a wɔresi dan no.

Amanneɛbɔ Sizing ne Structural Framing

Afuw mu susuw a ɛyɛ pɛpɛɛpɛ kyerɛ anammɔn a edi kan a ɛbɛma wɔatumi de ahyɛ mu yiye. Mfiridwumayɛfo susuw nneɛma a rough opening trɛw ne ne sorokɔ wɔ mmeae abiɛsa a ɛsono emu biara: soro, mfinimfini, ne ase. Wɔsan nso hwɛ diagonal distances de si so dua sɛ framing no tra ahinanan pɛpɛɛpɛ.

Width Check : [ Benkum ] --- [ Mfinimfini ] --- [ Nifa ] Ɔsorokɔ Hwɛ : [ Atifi ] --- [ Mfinimfini ] --- [ Ase ] Square Check : Ɛsɛ sɛ Ntwea so-kɔ-Ntwea so Diagonals no hyia

Ahwehwɛ akɛse a wɔde ayɛ nneɛma no de emu duru kɛse ka ɔfasu no ho. Ɛsɛ sɛ wɔn a wɔyɛ adwuma wɔ apam no mu no di kan hwɛ ti ne mmoa posts. Ɛsɛ sɛ saa nneɛma a ɛsoa adesoa yi soa ɔdan no mu duru nyinaa a bere kɔ so no, ɛnkɔ fam anaasɛ ɛnkotow.

Wim tebea a wɔde siw ano ne Flashing Detail

Nsu a wɔde siw dan no mu no bɔ ɔdan no ho ban fi nsu a ɛsɛe ne nsu a ɛtwetwe a ahintaw ho. Wɔn a wɔde mfɛnsere hyehyɛ mu no de teyp a ɛhyerɛn a emu yɛ duru gu sill no ho ansa na wɔde mfɛnsere no ahyɛ baabi a ɛhɔ yɛ toro no mu.

Pro Tip: Ɛsɛ sɛ silicone sealants tu mmirika bere nyinaa wɔ perimeter joints so. Saa akwanside yi ma osu a ɛkanyan ne mframa a ɛyɛ nwini a ɛkɔ mu no gyae awufo wɔ wɔn akwan so.

Sill pan a ɛkɔ fam no kyerɛ osutɔ nsu a ɛyera no fi nneɛma a ɛwɔ mu no so. Wim tebea a ɛkorɔn a ɛwɔ akwan no so no siw osu a mframa de ba bere a ahohuru bere mu ahum a ano yɛ den tu no ano.

Adwumayɛfoɔ Installation Mmoa

Owia dan nhyehyɛe a ɛyɛ den hwehwɛ sɛ wɔyɛ mfiridwuma ho nimdeɛ a ɛyɛ pɛpɛɛpɛ. Mfiridwuma akuw a wɔwɔ Derchi mfɛnsere ne pon mu de CAD ne BIM sotɔɔ mfonini ahorow a ɛkɔ akyiri ma wɔ amanne kwan so adwuma biara ho.

Saa mfiridwuma ho akwankyerɛ a ɛkɔ akyiri yi ma adansifo ne adansifo a wɔde besisi hɔ no yɛ mmerɛw:

• Mfiridwuma ho Nhwehwɛmu a Wɔayɛ no Amanneɛbɔ: Mfiridwumayɛfo bu mframa a ɛbɔ wɔ mpɔtam hɔ no ho akontaa na wɔhwɛ sɛ nea wɔhwehwɛ sɛ wɔde soa emu duru pɛpɛɛpɛ no yɛ nokware.

• CAD Sotɔɔ Mfonini a Ɛkɔ Akyiri: Mfonini ahorow a ɛyɛ pɛpɛɛpɛ kyerɛ sɛnea wɔde ankora besisi, nneɛma a wɔatwitwa no ho nsɛm, ne sɛnea wɔayɛ no kɛse.

• Mfiridwuma ho Akwankyerɛ a Wɔde Ma Anamɔn biara: Nwoma a wɔde si hɔ no hwɛ hu sɛ wɔbɛhyehyɛ no yiye na ɔhaw biara nni ho wɔ beae hɔ.

Adwumayɛfo mmoa ma adwuma beae ho nsusuwii a ne bo yɛ den fi hɔ. Afiewuranom nya owia dan ntrɛwmu a ɛfata pɛpɛɛpɛ, a ɛmma ahoɔden pii, a ɛyɛ komm na ɛyɛ kusuu wɔ bere biara mu.

Afotu a Wɔde Siesie Sunroom Sliding Windows

Ɔhwɛ a ɛfata ma mfɛnsere a ɛtwetwe a wɔde trɛw owia dan mu no kɔ so yɛ adwuma yiye mfe du du pii. Nneɛma a wɔyɛ daa no bɔ adansi ho nneɛma ho ban, esiw nsu a ɛbɛtɔ ano, na esiw ahoɔden a ɛyera ano.

Track ne Drainage Tokuru a Wɔhwɛ So

Efĩ ne nneɛma a asɛe boaboa ano wɔ mfɛnsere akwan mu bere nyinaa. Ɛsɛ sɛ afiewuranom de brɔs a ɛyɛ mmerɛw a wɔde hyɛ mu no de vacuum active tracks ɔsram biara. Sɛ wode ntama a ɛyɛ nwini popa dade akwan no mu a, eyi mfutuma a ɛyɛ den no fi hɔ ntɛmntɛm.

Kɔkɔbɔ a Wɔde Siesie: Anyɛ yiye koraa no, popa abɔnten nsu a ɛkɔ nsu mu no su ntokuru pɛnkoro afe biara. Nsu a ɛkɔ nsu mu a asiw no hyɛ osutɔ nsu san kɔ owia dan no mu bere a ahum a ano yɛ den retu no.

Sɛ wɔhohoro nneɛma mu kɔ akyiri mprenu afe biara a, ɛma nsu no kɔ yiye. Sɛ woprapra track no ntwea so a, ɛmma track no nsɛe a wɔmpɛ na ɛma ahwehwɛ no kɔ so twetwe a ɛnyɛ hwee.

Roller Srade ne Hardware a Wɔhwɛ So

Sliding sashes a emu yɛ duru hwehwɛ sɛ ase rollers a ɛyɛ adwuma ne hardware a ɛyɛ den a wɔde to mu. Ɛsɛ sɛ afiewuranom hwɛ ase glides bere ne bere mu sɛ ebia asɛe a wotumi hu anaasɛ ɛnsɛe.

• Track Surface Lubrication: Fa srade a wɔde silicone ayɛ petepete track a ɛho tew so kakra afe biara. Kwati nneɛma a wɔde yɛ petroleum anaa WD-40 efisɛ ɛtwetwe efĩ a ɛyɛ nnam.

• Hardware Nhwehwɛmu: Hwɛ mounting fasteners, nsa, ne locking actuators nyinaa afe biara na ama woahwɛ ahu sɛ nkitahodi no mu yɛ den.

Sɛ wode silicone spray anaa lithium srade fitaa gu rollers so a, eyi kankyee a ɛyɛ den no fi hɔ. Sɛ wosakra ɔsorokɔ nkɔnsɔnkɔnsɔn a, ɛsan de glide adeyɛ a ɛyɛ mmerɛw ba ntɛm ara.

Weatherstripping ne Nsɔano a Wɔhwɛ So

Nsɔano a ɛyɛ den a wɔde atwa ho ahyia no kora dan mu ɔhyew mu ahotɔ so na ɛma mframa a ɛyɛ nwini a ɛtwetwe no gyae. Afiewuranom betumi asɔ mfɛnsere mu nsɔano ahwɛ ntɛm denam nhwehwɛmu a ɛnyɛ den a wɔde aniwa hu ne sɔhwɛ a wɔde mia so ntɛmntɛm so.

Anamɔn 1: Hwɛ rɔba nsɔano no mu yiye sɛ ebia mpaapaemu, nsonsonoe, anaa anoano ayɛ petee anaa. Anamɔn 2: Yɛ krataa sɔhwɛ no denam panel no a wobɛto mu wɔ krataa krataa so no so. Anamɔn 3: Twe krataa no kɔ abɔnten; steady resistance kyerɛ sɛ wɔde nsɔano a emu yɛ den.

Wim tebea a ɛbɔ bere nyinaa kyerɛ sɛ wim tebea asɛe. Sɛ wɔsesa nsɔano a entumi nnyina ano a, ɛma mframa a ɛkɔ mu no gyae ntɛm ara, ɛtew ahoɔden ho ka so, na ɛma abɔnten nsu a ɛwɔ mu no ntam kwan ware.

Mfɛnsere a ɛtwetwe a ɛfata a wobɛpaw ama nneɛma a wɔde ka owia dan ho no ba fam wɔ ɔdan no ahoɔden, ɔhyew a ɛyɛ den, ne nsiesie a ɛnyɛ den so. Aluminium nnua a ɛyɛ fɛ ne ahwehwɛ a ɛmma ahoɔden nsɛe pii bɔ ofie nneɛma a wɔde ka ho ho ban fi wim tebea a emu yɛ den ho bere a ɛma dan mu hyew a eye afe mũ no nyinaa no.

Afiewuranom betumi ahwehwɛ mu aluminium mfɛnsere nhyehyɛe ahorow a wɔayɛ no sɛnea wɔpɛ afi Derchi mfɛnsere ne ɔpon mu de adan baabi biara ayɛ kronkronbea a ɛhyerɛn na ahobammɔ wom. Woasiesie wo ho sɛ wobɛma wo ho ayɛ foforo? Di mfɛnsere ho abenfo ho nkɔmmɔ nnɛ anaa bisa adwuma no ho afotu a wɔayɛ ama wo ankasa na woafi ase!

FAQ

Dɛn na ɛma aluminum mfɛnsere a ɛtwetwe no ye sen vinyl a wɔde yɛ owia dan?

Aluminium nnua ma ahoɔden a ɛkorɔn wɔ adansi mu sɛ wɔde toto vinyl ho a. Ɛnyɛ den sɛ wɔbɛboa ahwehwɛ akɛse a emu yɛ duru. Thermally broken aluminium nhyehyɛe ahorow a efi adwumayɛfo atitiriw te sɛ Derchi mfɛnsere ne ɔpon ma ɔhyew a ɛkyɛn so a ɛwɔ profiles a ɛyɛ fɛ, ultra-thin.

So afiewuranom betumi de mfɛnsere a ɛtwetwe nneɛma adi dwuma wɔ mmeae a owia bɔ wɔ mmere anan mu?

Aane! Multi-pane insulated glass a Low-E coatings ne argon gas ahyɛ mu ma ma ɔhyew a ɛkorɔn a ɛko tia.

Saa mfɛnsere a ɛtwetwe ahoɔden a ɛmma ahoɔden pii yi kyere dan mu hyew bere a awɔw bere mu awɔw wom na ɛda owia hyew adi wɔ ahohuru bere mu asram a ɛyɛ hyew mu.

Mframa dodow ahe na mfɛnsere a ɛtwetwe a ɛwɔ nhama pii mu no ma?

Multi-sash sliding window configurations ma afiewuranom bue bɛyɛ 50% anaa nea ɛboro saa wɔ ahwehwɛ ɔfasu no nyinaa mu. Nnua a wɔde ayɛ ntama no twetwe kɔ akwan a ɛwɔ ase no so yiye, na ɛma mframa pa kɔ so sen bere a ntama a wɔde afrafra no ma nkoekoemmoa nkɔ mu no.

Mpɛn ahe na ɛsɛ sɛ afiewuranom siesie mfɛnsere a ɛtwetwe nneɛma?

• Ɔsram biara: Fa mfutuma ne efĩ fi akwan a ɛyɛ nnam no mu.

• Afe Bi-Afe biara: Hwɛ na yi abɔnten nsu a ɛkɔ mu no su ntokuru mu.

Sɛ wosiesie kwan no daa a, ɛma nsu a ɛboaboa ano no gyae, ɛmma roller no nsɛe, na ɛma wonya awerɛhyem sɛ wɔde gliding bɛyɛ adwuma afe mũ no nyinaa a wɔmmɔ mmɔden biara.