Mɔfiame Bliboe Na Aluminium Slide Fesre: Nusianu Si Wòle Be Nànya Le Ƒe 2025 Me

Ènya be aluminum-fesre siwo wotsɔna ƒua du ate ŋu anɔ anyi ƒe 25 ne womelé be na wo boo oa? Ema didi wu vinyl siwo woate ŋu azã ɖe eteƒe ƒe akpa gãtɔ. Egbegbe aƒetɔwo le nusita fesre siawo siwo le blɔ eye wonɔa anyi didina la le tɔtrɔm le aƒewo ŋu le dukɔa me godoo la ŋu.

Aluminium slide fesrewo ƒoa ŋusẽ, atsyã, kple dɔwɔwɔ nu ƒu ɖe agba ɖeka me. Fesre siawo ƒe akpa siwo le tsia dzi alo esiwo le tsitrenu siwo zɔna nyuie le aluminum-mɔwo dzi la le wo ŋu. To vovo na fesre siwo wotsɔa ʋuƒo ƒoa xlãe tsã la, womeɖea teƒe dzi kpɔtɔna o esime wonaa ya nyui aɖe gena ɖe eme eye wokpɔa dzɔdzɔmekekeli.

Le mɔfiamegbalẽ sia si me nyawo de to me la, àsrɔ̃ nusianu tso aluminum slide fesrewo ŋu. Míadzro ƒomevi vovovowo, viɖe siwo le wo ŋu, aɖaŋuɖoɖo siwo ku ɖe wo ɖoɖo ɖe wo ŋu, kple ga si woabu ŋu. Àke ɖe alesi nàtia esi de blibo ŋu fesre siwo woate ŋu aʋuʋu na wò aƒe alo dɔa. Èɖale xɔ yeyewo tum alo nèle nuwo ɖɔm ɖo o, fesre siawo siwo woate ŋu azã le mɔ vovovowo nu gɔmesese akpe ɖe ŋuwò nàwɔ nyametsotso siwo ŋu nènya nu tsoe. Tso ŋusẽzazã nyuie ƒe kuxiwo gbɔ kpɔnu dzi va ɖo beléle na wo ƒe mɔnu nyuitɔwo dzi la, míeƒo nu tso akpa ɖesiaɖe si wòle be nànya ŋu.

Nukae Nye Aluminium Slide Fesrewo?

Aluminium Sliding Windows ƒe Gɔmeɖosewo Gɔmesese

Aluminium-fesre siwo wotsɔna ƒua du la wɔa dɔ le gɔmeɖose bɔbɔe aɖe nu. Wozɔna le tsia dzi le gamɔwo dzi. Alesi woƒua du nyuie la na woto vovo tso fesre siwo wotsɔa xɔtunuwo wɔe tsã gbɔ. Bu wo be wonye ahuhɔ̃e siwo ƒua du toa wo nɔewo ŋu agbagbadzedze aɖeke manɔmee.

Àkpɔ ƒomevi vevi eve le asi me:

> Fesre siwo ʋuna zi ɖeka : Akpa ɖeka koe ʋãna

> Fesre siwo wotsɔna ƒua du zi eve : Akpa eveawo siaa ƒua du faa

Nukae na aluminum ƒe tɔtrɔwo le etɔxɛ? Wosẽ ŋu ale gbegbe gake woƒe kpekpeme le bɔbɔe. Ati fesrewo hiã beléle ɣesiaɣi. Vinyl ate ŋu atrɔ le ɣeyiɣi aɖe megbe. Aluminium ye yea? Enɔa dzɔdzɔe eye wònyea nyateƒe ƒe bla nanewo.

Nu veviawo wɔa dɔ ɖekae le mɔ si me kuxi aɖeke mele o nu:

Fesre siawo to vovo tso bubuwo gbɔ le woƒe anyinɔnɔ kple alesi woƒe nɔnɔme trɔna ɖe nɔnɔmewo ŋu me. Wowɔa nu ɖe ​​ahuhɔ̃e ƒe teƒe siwo lolo wu ŋu nyuie wu nu akpa gãtɔ.

Aluminium Fesrewo ƒe Nɔnɔmetɔtrɔ le Egbegbe Xɔtuɖaŋu me

Aluminium ge ɖe fesrewo wɔwɔ me le ƒe 1930-awo me. Aʋa megbe xɔtutuwo va do gã ɖe edzi. Xɔtulawo hiã xɔtunu sesẽ siwo ƒe asi bɔbɔ. Aluminium sɔ pɛpɛpɛ.

Nukatae wòva zu tiatia si woayi na sliding systems? Susu etɔ̃e ɖe dzesi:

1.Exceptional ŋusẽ-ɖe-kpekpeme ƒe sɔsɔme

2.Tsitretsitsi ɖe gbeɖuɖɔ kple gbegblẽ ŋu

3.Minimal beléle na nudidiwo

Egbe ƒe nɔnɔmewo tu liƒowo ɖe ŋgɔ wu. Smart home integration lolo ŋutɔ. DERCHI elektrik-fesre siwo wotsɔ kɔa nu ɖe ​​dzi la ɖe esia fia nyuie. Wowɔa dɔ to asitelefon dzi dɔwɔɖoɖowo dzi. Dzoxɔxɔ ƒe ɖiɖiɖeme nana ŋusẽzazã nyuie nyona ɖe edzi. Powder coating naa amadede tiatia siwo seɖoƒe meli na o.

Egbegbe xɔtuɖaŋunyalawo lɔ̃a fli dzadzɛawo. Fesre siawo naa xɔme kple gota kadodo siwo me kuxi aɖeke mele o.

Aluminium Slide Fesre Ƒomeviwo

Fesre Siwo Le Tsitrenu

Dzogoe siwo le tsia dzi ye xɔ aƒe ɖe aƒewo ƒe asi me. Wowɔa dɔ eye woƒe asi bɔbɔ. Aƒetɔ akpa gãtɔ dea dzesi nusiawo enumake.

Ðoɖo siwo wowɔna ɖaa dometɔ aɖewoe nye:

> Two-panel systems : Ðeka le teƒe ɖeka, ɖeka le glidzaglidza

> Tiatia siwo le akpa etɔ̃ : Woɖɔ titina ɖo, axawo le ʋuʋum

> Bypass designs : Panelwo ƒua du toa wo nɔewo ŋu

Alesi wotsɔe sɔ kple wo nɔewoe nye esi:

Akpa etɔ̃ ƒe tɔtrɔwo wɔa dɔ nyuie ŋutɔ le xɔdɔmewo me. Wowɔa nukpɔkpɔ siwo me woate ŋu akpɔ nu le nyuie. Titinaa nɔa teƒe ɖeka be wòali ke. Axa eveawo siaa ƒua du nyuie.

Fesre Siwo Le Tsitrenu (Sash Windows) .

Tsitrenu ʋuʋu naa egbegbe aƒewo ƒe dzedzeme si wonya nyuie. Esiawo ʋãna yia dzi kple anyime boŋ.

Fesre siwo wotsɔ ƒo ɖe wo nɔewo ŋu zi ɖeka nana wònɔa bɔbɔe. Sash si le ete koe ʋãna. Etame nɔa teƒe ɖeka. Wonye tiatia siwo me gazazã mele o.

Aluminium fesre siwo wotsɔ ƒo ɖe wo nɔewo ŋu zi eve nana woate ŋu atrɔ ɖe nɔnɔmewo ŋu geɖe wu. Sash eveawo siaa ƒua du le wo ɖokui si. Èkpɔa ya si gena ɖe eme dzi tso etame alo ete. Dzadzɛnyenye hã va nɔa bɔbɔe wu.

Egbegbe mɔ̃ɖaŋununya trɔa asi le agbalẽ xoxo siawo ŋu. DERCHI ƒe elektrik-fesre siwo wotsɔ kɔa nu ɖe ​​dzi la ɖea nu yeyewo fiana nyuie. Wo dometɔ aɖewoe nye:

> Dɔwɔwɔ le eɖokui si to smartphone dɔwɔɖoɖowo dzi

> 8mm + 20A + 8mm eve ƒe ahuhɔ̃e

> Magnetic screens hã le eme

> Aɖaŋu si te ŋu nɔa te ɖe ya nu

Fesre siawo siwo me nunya le la wɔa nu ɖe ​​gbe ƒe sededewo ŋu. Ede blibo na installations siwo gbɔ ɖoɖo sesẽ.

Viɖe siwo le Aluminium Slide Fesrewo ŋu

Viɖe Siwo Le Enɔanyi Kple Ŋusẽ Ŋu

Aluminium ƒoa ŋusẽ vevie ɖe xɔtunu siwo ƒe kpekpeme le bɔbɔe me. Alesi nane si le bɔbɔe alea gbegbe sena le eɖokui me be yeli ke alea gbegbe la doa dzidzɔ na ame ŋutɔ. Fesre siawo kpɔa nusianu si dzɔdzɔme atsɔ aƒu gbe ɖe wo ŋu la gbɔ.

Bu vinyl fesrewo ŋu le dzomeŋɔli ƒe dzoxɔxɔ me. Wotrɔna eye woblaa wo. Atiwo ƒe xɔtunuwo? Wovuvuna le fafa me. Aluminium nɔa anyi ɖaa be wòawɔ ƒe sia ƒe.

Yame ƒe Nɔnɔme ƒe Dɔwɔwɔ Tsɔtsɔ Sɔ Kple Wo Nɔewo:

Nɔnɔme siwo gbɔ eme meɖea wo ɖa vivivi o. Ahomya ƒe teƒewo nɔa te ɖe aluminum-gbadzɛwo dzi. Wonɔa te ɖe ya sesẽwo nu evɔ womedoa kpo nu o. 6063-T5 ƒe akɔbli si wozãna le fesre nyuiwo me naa ŋusẽ tɔxɛ aɖe.

Akpa nyuitɔ kekeakee nye esi: wonɔa anyi ƒe 20-25 bɔbɔe. Nusiwo woɖo ɖe teƒe aɖewo xɔa ƒe 30 kple edzivɔ. Beléle na wo nyuie nana ame ƒe agbenɔƒe didi wu. Tsɔ ema sɔ kple vinyl ƒe ƒe 15-20 ƒe mamã dedie. Èle ŋku lém ɖe ƒe bla nanewo ƒe dɔwɔwɔ si ŋu kakaɖedzi le ŋu.

Dzadzraɖo ƒe Nudidi Siwo Mebɔ O

Ŋlɔ ati siwo wobia tso wo si be woalé be na wo ɣesiaɣi la be. Terite ƒe dzimaɖitsitsi aɖeke meli o. Tsi aɖeke megblẽ le eŋu o. Ƒe sia ƒe ƒe nuwo gbugbɔgawudɔ aɖeke meli si ɖua wò kwasiɖanuwuwuwo o.

Aluminium-fesre siwo wotsɔna ƒua du la mehiã naneke kloe tso gbɔwò o. Tututu bɔbɔe aɖe nana wodzena yeye. Zã adzalẽ fafɛ kple tsi zi eve ƒe sia ƒe. Emae nye ema.

Dzadzraɖo ƒe Ðoɖowɔɖiwo Tsɔtsɔ Sɔ Kple Wo Nɔewo:

Ga si wodzrana ɖo ɣeyiɣi didi la dzina ɖe edzi kabakaba. Womaƒle amadede aɖeke o. Fe aɖeke mexea fe na kontraktɔ o. Wometsɔa akpa aɖeke ɖɔli woe na gbegblẽ si gblẽ o. Wò gadede gbãtɔ me yia edzi le viɖewo xem.

Powder coating alo PVDF ƒe nuwuwu nyuiwo tsi tre ɖe fading ŋu. Woléa woƒe dzedzeme me ɖe asi asikaka wo ŋu manɔmee. Ƒuta dɔwɔƒewo gɔ̃ hã tsi tre ɖe dze ya ƒe nugbegblẽ ŋu.

Aɖaŋuwɔwɔ ƒe Trɔtrɔ ɖe Nɔnɔmewo Ŋu Kple Atsyɔ̃ɖoɖo

Egbegbe xɔtuɖaŋuwo lɔ̃a alesi aluminium wɔa dɔ le mɔ vovovowo nu. Slim profiles na wò nukpɔkpɔ dzina ɖe edzi. Glass geɖe wu, frame ʋɛ aɖewo - ele bɔbɔe nenema.

Edze abe amadede tiatia siwo nuwuwu meli na o ene:

> Standard powder coat ƒe amadedewo

> Amadede ƒe sɔsɔ si wowɔ ɖe ɖoɖo nu li

> Ga kple nuŋɔŋlɔ ƒe nuwuwu

> Ati-ku ƒe dzedzeme

Fli siwo le blɔ la kpena ɖe atsyã ɖesiaɖe ŋu. Egbegbe aƒewo ɖea nusiwo wotsɔ ɖo anyigba vaseɖe dzisasrã dzi fiana. Atsyã siwo wowɔna le blema la ɖea vi tso nukpɔkpɔ ƒe fli dzadzɛwo me. Ŋutinya me nuwo ɖɔɖɔɖo gɔ̃ hã zãa aluminum dzidzedzetɔe.

Trɔ asi le nu ŋu yi ŋgɔ wu amadedewo ko. Adzɔnuwo wɔlawo naa:

> Profile ƒe titrime vovovowo

> Hardware ƒe atsyã vovovowo

> Ʋuʋudedi alo vɔvɔli siwo wotsɔ wɔ ɖekae

> Smart home ƒe ɖekawɔwɔ

Ʋuʋu gãwo? Megblẽ naneke o. Aluminium kpɔa glass teƒe siwo keke ta siwo nu bubuwo mate ŋu alé o la gbɔ.

Aluminium Slide Windows ƒe kuxiwo kple nusiwo ŋu woabu

Ŋusẽzazã nyuie ƒe Kuxiwo

Mina míagblɔe tẽ. Aluminium lɔ̃a dzoxɔxɔ tsɔtsɔ yi teƒe bubu. Emae nye eƒe anyidzedze gãtɔ kekeake. Wò dzoxɔxɔfewo ate ŋu awɔ nuku na wò le dzomeŋɔli. Fafa ƒe gazazãwo dzina ɖe edzi le dzomeŋɔli hã.

Nu ka ta? Aluminium ƒe U-xexlẽme lolo ŋutɔ. Etsɔa dzoxɔxɔ yia teƒe bubuwo kabakaba wu nu bubuwo. Bu eŋu be enye mɔ gã si dzi dzoxɔxɔ le. Dzoxɔxɔ ƒua du to aluminum-gbadzɛwo me abe ʋu siwo le mɔdodo sesẽ dzi ene.

Dzoxɔxɔ ƒe Tsɔtsɔ Sɔ Kple Wo Nɔewo:

Nya nyui aɖe li gake. Dzoxɔxɔ ƒe ɖiɖiɖeme trɔa nusianu. Wonye plastik-kplu siwo le xɔtunuwo me. Wodoa kplamatse dzoxɔxɔ ƒe sisi nyuie.

Egbegbe egbɔkpɔnuwo dometɔ aɖewoe nye:

> Polyamide dzoxɔxɔ ƒe mɔxenuwo

> Xɔ geɖe ƒe xɔmenuwo ƒe nɔnɔmetatawo

> Glazing etɔ̃ ƒe tiatia

> Low-E glass ƒe nutsyɔnu

Yame ƒe nɔnɔme hã le vevie. Yame ƒe nɔnɔme fafɛwoa? Aluminium wɔa dɔ nyuie ŋutɔ. Dzoxɔxɔ si gbɔ eme? Àhiã be woawɔ asitɔtrɔ mawo. Dziehenutowo biaa dzoxɔxɔ ƒe ɖiɖiɖeme. Dzigbenutowo ate ŋu adzo le wo dzi ɣeaɖewoɣi.

Condensation Nyawo

Ŋdi zãmu le wò fesrewo dzia? Emae nye condensation. Aluminium-gbadzɛwo heae abe magnet ene.

Dzoxɔxɔ ƒe vovototoe hea kuxia vɛ. Ya si xɔ dzo le xɔ me doa go aluminum fafɛ. Tsi ƒe ʋeʋẽ lilili dzɔna enumake. Enye dzɔdzɔmeŋusẽŋununya vevi siwo le dɔ wɔm tsi tre ɖe ŋuwò.

Nusiwo do tso eme medze tugbe o:

> Tsi ƒe ƒuƒoƒo ɖe sills dzi

> Aŋɔ si ate ŋu adzi ɖe edzi

> Da ama nusiwo gblẽ le fesrewo te

> Tsi ƒe ɖiƒoƒo le gliwo ŋu

Mɔxexe ɖe enu ƒoa dzadzɛnyenye ɣesiaɣi. Nusiwo wɔa dɔe nye esi:

Condensation Egbɔkpɔnu:

1.Install dzoxɔxɔ ɖiɖiɖeme (ɖea frame dzoxɔxɔ dzi kpɔtɔna)

2.Na yaƒoƒo le xɔa me nanyo ɖe edzi

3.Zã dehumidifiers le kuxi teƒewo

4.Ade tsi si me tsi mele o ƒe nutsyɔnu

5.Maintain xɔme dzoxɔxɔ madzudzɔmadzudzɔe

Glazing eve kpena ɖe ame ŋu ŋutɔ. Ya ƒe dometsotso si ƒe didime nye 20mm la xea mɔ na ya nyuie wu. Aƒetɔ aɖewo hã tsɔa ahomya ƒe fesrewo kpena ɖe eŋu.

Nusiwo ŋu Wotsi dzi ɖo le xɔxlɔ̃ ŋu

Aluminium wɔa oxidize. Dzɔdzɔmeŋusẽŋununyae, ke menye nukpɔsusu o. Nu ɣi ma si wotsɔ chalk blae lae? Emae nye aluminum oxide ƒe wɔwɔ. To vovo na gbeɖuɖɔ la, ekpɔa ga si le ete la ta ŋutɔŋutɔ.

Gake nusi wolée nye esi. Dzeya nana nusianu zɔna kabakaba. Ƒutaxɔwo doa go kuxi gãwo. Atsiaƒu me tsi si wotsɔna ƒua gbe la dzea ame dzi ɣesiaɣi.

Nusiwo ate ŋu ana woaxɔ dzo:

> Adzɔge tso atsiaƒu gbɔ: Le kilometa 1 te = Afɔku gã aɖe

> Dɔwɔƒewo ƒe teƒewo: Atikewo ƒe agbɔsɔsɔ

> Ta si te ɖe ta ŋu: Chlorine ƒe nugbegblẽ

> Acid tsidzadza ƒe nutowo: Nutome ƒe nuteɖeamedzi

Ametakpɔnu siwo wotsɔ blaa ŋkekea ɖe agbe:

> Anodizing (elektrikŋusẽ ƒe dɔwɔwɔ) .

> Powder coating (nuɖuɖu si woɖa ɖe edzi) .

> PVDF ƒe nutsyɔnu (premium tiatia) .

Beléle na xɔa nana be xɔxlɔ̃ meganɔa anyi o. Klɔ xɔtunuawo ƒe ɣleti etɔ̃ ɖesiaɖe le ƒuta nutoawo. Kpɔe ɖa be nusiwo wotsɔ blae hã gblẽ ƒe sia ƒe. Ka asi ʋuʋudediwo ŋu enumake.

Dzɔdzɔmeŋutete le vevie le afisia. 6063-T5 ƒe akɔbli la te ŋu nɔa te ɖe xɔxlɔ̃ nu nyuie wu. Nusiwo woate ŋu azã ɖe eteƒe siwo ƒe asi bɔbɔ wu doa kpo nu kabakaba wu. Zã ga geɖe do ŋgɔ. Dzra ga ɖo ɖe nusiwo woatsɔ aɖɔlii ŋu emegbe.

Nu Veviwo Kple Mɔ̃ɖaŋununya Le Egbegbe Aluminium Slide Fesrewo Me

Frame Mɔ̃ɖaŋununya Kple Nusiwo Wozãna

Egbe tɔ... aluminum slide fesrewo menye tɔgbuiwò ƒe gaxɔwo o. Wonye mɔ̃ɖaŋununya ƒe nukunuwo. Nya ɣaɣla lae? 6063-T5 aluminum ƒe akɔbli. Enye sikadzidzenu.

Akɔbli sia naa:

> Tensile ŋusẽ: 241 MPa suetɔ kekeake

> Tsitretsitsi ɖe xɔxlɔ̃ ŋu nyuie ŋutɔ

> Extrudability si de ŋgɔ wu

> Wowu anyigba si le gbadzaa nu

Profile ƒe titrime le vevie ŋutɔ. Fesre nyui akpa gãtɔ zãa 3.0mm ƒe nɔnɔmetatawo. Wo dometɔ siwo ƒe asi bɔbɔ wua? Wotsɔa 2.0mm lãa dzogoewo. Àse vovototoa gɔme. Profile siwo le kpekpem wu fia be:

> Less flexing le ya ƒe agba te

> Hardware mounting si nyo wu

> Agbenɔƒe didi wu

> Dedienɔnɔ si nyo wu

Frame Mɔ̃ɖaŋununya Tsɔtsɔ Sɔ Kple Wo Nɔewo:

Dzoxɔxɔ ƒe ɖiɖiɖeme trɔ nusianu. Wonye polyamide-ka siwo le ememe kple egodo ƒe xɔtunuwo dome. Dzoxɔxɔ mate ŋu ati kpo atso afima o. Wò ŋusẽfewo da akpe na wò.

Xɔ geɖe ƒe nɔnɔmewo léa ya ƒe kotokuwo ɖe mɔ̃ me. Xɔ ɖesiaɖe tsɔa nusiwo xea mɔ na dzoxɔxɔ kpena ɖe eŋu. Fesre siwo ƒe nyonyome de ŋgɔ la nyea xɔ 3-5. Wowɔa dɔ abe dzoxɔxɔnu suesuesuewo ene.

Glazing Tiatia na Aluminium Sliding Fesrewo

Glass naa fesre ƒe dɔwɔwɔ alo gbãnɛ. Glazing eve xɔ aƒe ɖe asi me. Gake triple glazing xɔa anyigba kabakaba.

Esia nye ɖoɖo si bɔ: 8mm + 20A + 8mm. Gbegɔmeɖeɖea? Glass-kplu eve siwo ƒe didime nye 8mm. 20mm ya ƒe dometsotso le wo dome. Ele bɔbɔe gake wòwɔa dɔ nyuie.

Glazing Dɔwɔwɔ Ŋuti Nyatakakawo:

Low-E coatings trɔa fefea. Wonye ga siwo womekpɔna o. Woɖea dzoxɔxɔ fiana wògbugbɔna. Dzomeŋɔli ƒe dzoxɔxɔ nɔa anyi. Dzomeŋɔli ƒe dzoxɔxɔ nɔa eme.

Gas yɔyɔ doa ŋusẽ dɔwɔwɔ ɖe edzi:

> Argon : Ebɔ wu, eƒe asi bɔbɔ

> Krypton : Nusiwo wotsɔ xea mɔ na dzoxɔxɔ nyuie wu, woƒe asi nyo wu

> Ya : Standard gake mewɔa dɔ boo o

Mɔ̃ɖaŋununya siawo ƒoa ƒu sesĩe. Glazing eve kple Low-E kple argon? Àɖe ŋusẽ si bu dzi akpɔtɔ 50%. Glazing etɔ̃ kple krypton? Enyo wu gɔ̃ hã.

Ŋusẽkpɔɖeamedzi ɖe dɔwɔwɔ dzi lolo ŋutɔ. Gɔmeɖose eve glazing ƒo ɖeka to 40%. Tsɔ Low-E ƒe nutsyɔnu kpe ɖe eŋua? 20% ƒe ŋgɔyiyi bubu. Gas yɔ fũu? 10% ƒe gadzadzraɖo geɖe wu.

Hardware Kple Dɔwɔnu Siwo Wotsɔ Wɔa Dɔe

Dɔwɔwɔ nyuie nɔ te ɖe xɔtunu nyuiwo dzi. Track systems fiaa mɔ nusianu. Ga si mexɔ dzo o ƒe mɔwo nɔa anyi didi wu aluminum tɔ. Bɔl-bɔl-ʋuʋudediwo ƒua du agbagbadzedze aɖeke manɔmee.

Egbegbe mɔ̃ siwo wotsɔ xea mɔe wɔa dɔ ɖe ame dzi:

> Nu geɖewo ƒe ʋɔtruwo (3-5 ƒe ʋɔtruwo) .

> Gaƒoɖokuiwo le wo ɖokui si ne wotu wo

> Gaƒoɖokui siwo wotsɔa safui wɔa dɔe hena dedienɔnɔ

> Ðeviwo ƒe dedienɔnɔ ƒe gaƒoɖokuiwo li

Smart features trɔa zãla ƒe nuteƒekpɔkpɔ. DERCHI ƒe elektrikmɔ̃wo ɖea nusiwo ate ŋu adzɔ la fiana. App dziɖuɖu tso wò aba dzi. Gbe ƒe sededewo to Alexa dzi. Nuwuwu le eɖokui si le ahomyawo me.

Smart Window ƒe Nɔnɔmewo:

1.Smartphone dɔwɔɖoɖo dziɖuɖu

2.Yame ƒe nɔnɔme sensor ƒe ɖekawɔwɔ

3.Ɣeyiɣidzidzenu ƒe ɖoɖowɔwɔ

4.Adzɔge ʋĩi ŋkuléle ɖe nu ŋu

5.Dedienɔnɔ ŋuti nuxlɔ̃amewo

Screens tsɔa dɔwɔwɔ kpena ɖe eŋu. Magnetic screens léna ɖe eŋu enumake. Woate ŋu aɖe wo ɖa hena dzadzɛnyenye. Screen siwo wobla ɖe wo nɔewo ŋu la meɖea teƒe dzi kpɔtɔna. Nylon mesh tsi tre ɖe vuvu nu.

Dɔwɔwɔ ƒe mɔnuwo toa vovo le woƒe nyonyome nu:

> Gɔmeɖose: Asi tsɔtsɔ ƒu gbe ɖeɖeko

> Mid-range: Fafɛ-klo nu ƒe nɔnɔmewo

> Premium: Mɔ̃ ƒe dɔwɔwɔ

> Smart: nuwo wɔwɔ le wo ɖokui si bliboe ate ŋu adzɔ

Aluminium Slide Fesrewo ƒe Gazazã Ŋuti Numekuku

Nuƒle ƒe Gazazã Gbãtɔ

Mina míaƒo nu tso ga ŋu. Aluminium slide fesrewo ƒe asi nye $29-$33 le afɔ square ɖeka dzi zi geɖe. Ema nye hoʋiʋli ƒe asixɔxɔ. Menye tiatia si ƒe asi bɔbɔ wu o. Menye esi xɔ asi wu hã o.

Fesre Nuwo ƒe Asi Tsɔtsɔ Sɔ Kple Wo Nɔewo:

Nu geɖe nana nuwo ƒe asi yia dzi alo ɖiɖina:

> Fesre ƒe lolome (lolo wu = asixɔxɔ si nyo wu ɖe afɔ ɖeka dzi)

> Glass ƒomevi (glas eve/etɔ̃) .

> Frame ƒe titrime (2.0mm vs 3.0mm)

> Hardware ƒe nyonyome

> Amadede alo nuwuwu siwo wowɔ ɖe ɖoɖo nu

> Smart ƒe nɔnɔmewo

Gazazã ƒe tiatia siwo woate ŋu awɔ la dzea egɔme tso dɔlar 25 lɔƒo. Woawɔ dɔ nyuie. Gake dzogoewo ya tsona. Frame siwo le tsɛ wu. Hardware veviwo. Gaƒoɖokui ɖekaɖekawo.

Premium fesrewo ƒo $40+. Èle fe xem ɖe:

> Dzoxɔxɔ ƒe gbagbã le teƒe bliboa

> Nu geɖewo ƒe ʋuʋu ƒe ɖoɖowo

> Low-E etɔ̃ ƒe ahuhɔ̃e

> Dɔwɔwɔ le eɖokui si

> Mɔɖegbalẽ siwo keke ta (ƒe 5+) .

Nudɔdɔ gbogbo aɖewo ɖea ga dzi kpɔtɔna. Fesre 20+ ƒe nudɔdɔa? Kpɔ mɔ be woaɖe asi le 5-10% ŋu. Nudzrala aɖewo ɖea asi dzi kpɔtɔna va ɖoa dɔlar 27 ɖe afɔ square ɖeka dzi.

Asixɔxɔ si nɔa anyi didi kple ROI

Ga si wozã le gɔmedzedzea me gblɔa ŋutinyaa ƒe afã. Asixɔxɔ si anɔ anyi ɣeyiɣi didi le vevie wu. Aluminium fesrewo xea fe na wò vivivi gake kakaɖedzitɔe.

Ŋusẽ si wodzrana ɖo la toa vovo le nuto ɖesiaɖe me:

> Yame fafɛ: $200-$400 ƒe sia ƒe ga si wodzrana ɖo

> Nuto siwo le titina: $150-$250 ƒe gadzadzraɖo

> Nuto siwo me dzoxɔxɔ le: $300-$500 ƒe gadzadzraɖo

Ƒe 25 ƒe Gazazã Ŋuti Numekuku:

Ga si wodzrana ɖo ɖe beléle na xɔa ŋu la dzina ɖe edzi kabakaba. Nutata aɖeke meɖea dɔlar 150 dzi kpɔtɔna ƒe sia ƒe o. Womedzraa nu gbegblẽwo ɖo o. Atikewɔwɔ na ʋetsuvi aɖeke meli o. Dzadzɛnyenye ɣeaɖewoɣi ko.

Nuwo ƒe asixɔxɔ hã dzina ɖe edzi. Fesre yeyewo tsɔa gazazã ƒe 70-80% kpena ɖe aƒea ƒe asixɔxɔ ŋu. Nuƒlelawo lɔ̃a nusiwo ŋu womeléa be na o. Woaxe ga home siwo woxena ɖe eta.

Tsitsatsa siwo wotsɔ ɖɔa li wo nɔewo lɔ̃a aluminium:

> Aluminium: Ƒe 20-25 sɔŋ

> Vinyl: Ƒe 15-20 sɔŋ

> Ati: Ƒe 15-25 (kple beléle na wo)

Aluminium fesre nyuiwo nɔa anyi didi wu. Wo dometɔ aɖewo xɔa ƒe 30 bɔbɔe.

Aluminium Slide Fesre Nyuitɔ Tiatia

Wò Hiahiãwo Me Dzodzro

Dze egɔme tso wò yame ƒe nɔnɔme dzi. Etrɔa asi le nusianu ŋu. Dzomeŋɔli siwo fa miamiamia? Àhiã dzoxɔxɔ ƒe ɖiɖiɖeme. Dzomeŋɔli siwo me dzoxɔxɔ le biaa Low-E glass. Ƒuta teƒewo hiã be woatsɔ nu siwo mexɔ dzo o.

Xɔtutu ƒe atsyã hã le vevie. Egbegbe aƒewo lɔ̃a aluminum-kpe siwo le tsɛ. Aƒe siwo wotu ɖe kɔnyinyiwo dzia? Ðewohĩ woahiã amadede siwo wowɔ ɖe ɖoɖo nu. Zi geɖe la, dutanyigbadzinɔlawo ƒe atsyãwo dina be akaɖi siwo me ma.

Hiahiãwo Ŋuti Numekuku Ŋuti Nuŋlɔɖi:

> Dzoxɔxɔ ƒe didime le mama dedie nu

> Fafa ƒe agbɔsɔsɔme

> Ɣe ƒe keklẽ ƒe mɔfiame

> Xɔtuɖaŋu ƒe atsyã

> Xɔme ƒe dɔwɔwɔ

Bu dɔwɔwɔ ŋu kpɔ:

> Mlɔƒe ƒe fesrewo hiã na egress compliance

> Dzodoƒe ƒe fesrewo ŋu kɔklɔ bɔbɔe ɖea vi

> Xɔdɔmewo dina be yewoakpɔ nu geɖe wu

> Tsileƒewo hiã na ame ŋutɔ ƒe ahuhɔ̃e

Gazazã ƒe ɖoɖo ɖoa liƒowo. Slide veviwo dzea egɔme tso dɔlar 250 dzi le fesre ɖeka nu. Premium tiatiawɔblɔɖe ƒo $800+. Aƒetɔ akpa gãtɔ zãa dɔlar 400-500 ɖe fesre ɖeka ŋu.

Dzesidede Dzedzeme Siwo Woadi

Mègaka ɖe dzedzeme ɖeɖeko dzi o. Kpɔ xɔa ƒe titrime ɖa gbã. Fesre nyuiwo zãa gli siwo ƒe lolome nye 3.0mm ya teti. Wo dometɔ siwo ƒe asi bɔbɔ wua? Zi geɖe la, woƒe didime nye 2.0mm. Àte ŋu ase vovototo si le wo dome la gɔme.

Hardware ɖea nyonyome fiana enumake:

> Smooth roller dɔwɔwɔ

> Mɔ̃ sesẽ siwo wotsɔ xea mɔe

> Ga si mexɔ dzo o ƒe akpa aɖewo

> Roller siwo woate ŋu atrɔ asi le

Ðaseɖigbalẽ ƒe Dzidzenuwo:

Mɔɖegbalẽwo gblɔa ŋutinyawo. Adzɔnu siwo ŋu ŋkɔ le la naa:

> Ƒe 5+ le framewo dzi

> Ƒe 10+ le glass nutrenu dzi

> Ƒe 2+ le hardware dzi

Mɔɖegbalẽ aɖeke meli oa? Zɔ dzo le afima. Mɔɖegbalẽ kpuiwo fia be eƒe nyonyome mede ame dzi o.

Aluminium Slide Fesrewo Sɔsɔ Kple Nu Bubuwo

Nya ɖesiaɖe kple eƒe nɔƒe. Mina míatsɔe asɔ kple wo nɔewo anukwaretɔe.

Aluminium kple Vinyl:

Aluminium ɖua dzi le ŋusẽ me. Ekpɔa nu siwo lolo wu gbɔ. Amadedewo nɔa anyi eteƒe didi wu. Vinyl ƒe asi mede ŋgɔ o. Exea mɔ na dzoxɔxɔ nyuie wu le dzɔdzɔme nu. Gake ate ŋu atrɔ.

Aluminium kple Ati:

Ati dzena abe ɖe wòle blema ene. Naneke meƒo eƒe dzoxɔxɔ ta o. Aluminium nɔa anyi didi wu gake. Zero rot dzimaɖitsitsiwo. Vɔvɔ̃ aɖeke mele termite ŋu o. Nu dzadzraɖo? Aluminium mehiã ɖeke kura o.

Nusiwo Wotsɔ Sɔ Kple Wo Nɔewo ƒe Matrix:

*Kple dzoxɔxɔ ƒe ɖiɖiɖemewo

Fiberglass ye xɔa asi wu. Ewɔa dɔ nyuie ŋutɔ. Gake aluminum naa asixɔxɔ si nyo wu. Vevietɔ na egbegbe atsyãwo.

Aluminium Slide Fesrewo Dede Kple Wo Dzi Kpɔkpɔ

Dɔnyala ƒe Dɔwɔɖoɖo

Eɖoɖo nyuie xea mɔ na taɖuame le etsɔme. Ame bibiwo dzea egɔme kple dzidzedze nyuie. Woléa ŋku ɖe ʋɔtru siwo woʋu ŋu zi eve. Level le vevie. Square le vevie wu.

Pre-installation prep dometɔ aɖewoe nye:

> Fesre xoxowo ɖeɖe ɖa keŋkeŋ

> Dzodzro le frame ƒe nɔnɔme ŋu

> Gbegblẽ alo nusiwo gblẽ ɖesiaɖe ɖɔɖɔɖo

> Kakaɖedzi nana be woƒe lolome sɔ

Klẽ kple nutrenu nana yame ƒe nɔnɔme ƒe mɔxenu alo gbãnɛ. Dzɔdzɔmeɖoɖo nyuiwo zãa:

> Tepe si le keklẽm si léna ɖe eɖokui ŋu

> Foam insulation keke ɖe enu

> Caulk si ƒe nyonyome le gota

> Sill-gba nyuiwo

Afɔɖeɖe siwo woawɔ atsɔ aɖoe:

1.Aply flashing na ʋuʋu rough

2.Ðo fesre ɖe teƒea

3.Level kple square nyuie

4.Secure kple gaviwo

5.Insulate dometsotsowo nyuie

6.Seal ƒunukpeƒewo katã

Dodokpɔe kplɔe ɖo. Woalé ŋku ɖe dɔwɔwɔ nyuie ŋu. Ele be gaƒoɖokuiwo nawɔ dɔ nyuie. Womeɖe mɔ ɖe babla aɖeke ŋu o. Asitɔtrɔwo dzɔna fifia, ke menye emegbe o.

Beléle Na Nu Nyuitɔ Kekeake

Aluminium-fesre siwo wotsɔna ƒua du la hiã beléle sue aɖe ko. Gake 'minimal' menye 'zero o.' Smart beléle na agbe didi ɖe edzi ŋutɔ.

Dzadzɛnyenye ƒe Ðoɖowɔɖi:

Mɔa dzi dzadzraɖo nana nuwo nɔa zɔzɔm:

> Tsɔ ya ƒo ƒu gbeɖuɖɔwo edziedzi

> Tsɔ avɔ xɔdzo tutue

> De silicone spray si mesɔ gbɔ o

> Mègazã atike siwo me ami le gbeɖe o

Hardware hã hiã be woalé ŋku ɖe eŋu. Si ami na akpa siwo le ʋuʋum ƒe sia ƒe. Zã ami ƒuƒu ɖeɖeko. Kpɔe ɖa be gaviawo le gbadzaa hã. Kpee sesĩe alesi wòhiãe.

Ƒe sia ƒe ƒe ŋkuléle ɖe nu ŋu léa kuxiwo kaba:

> Kpɔ yame ƒe nɔnɔme si me yame ƒe nɔnɔme le ɖa

> Do ʋuƒoawo katã kpɔ

> Lé ŋku ɖe xɔa ƒe dzogoewo ŋu

> Di nutrenu ƒe kpododonu hã

Nya Siwo Bɔ Ðe Ame Ŋu ƒe Kuxiwo Gbɔkpɔkpɔ

Fesrewo ƒe ati? Mègazi wo dzi o. Zi geɖe la, gbeɖuɖɔwoe hea esia vɛ. Klɔ mɔ siwo dzi woto la ŋu nyuie gbã. Ðe nègaku ɖe eŋu kokokoa? Ðewohĩ ahiã be woatrɔ asi le agbalẽ xatsaxatsawo ŋu.

Nusiwo Woaɖɔ Kpata le Kpekpeɖeŋunana Ŋu:

1.Klɔ tracks keŋkeŋ

2.Check roller ƒe ɖoɖowɔwɔ

3.Trɔ asi le roller ƒe kɔkɔme ŋu

4.De silicone ami si wotsɔna ƒoa amie

5.Trɔ agbalẽ xatsaxatsa siwo vuvu

Ya doa ŋusẽ gbegblẽ. Di wo kple dzudzɔ ʋeʋĩ ƒe dzudzɔ. Kpɔ afisi wòle ʋuʋum le ɖa. Teƒe siwo tsi si le dodom le zi geɖe:

> Frame ƒe dzogoewo

> Yame ƒe nɔnɔme ƒe dometsotsowo

> Do ʋɔtruwo ɖe teƒewo

> Kpekpe ƒe ketekemɔwo

Tsidzadza doa dziku na aƒetɔwo. Efiaa dzoxɔxɔ ƒe vovototo. Egbɔkpɔnuwo to vovo:

> Na ya si le xɔa me nanyo ɖe edzi

> Zã yaƒoƒomɔ̃wo

> De ahomya ƒe fesrewo eme

> Kpɔ yame ƒe nɔnɔme ŋuti nuŋlɔɖiwo ɖa

Ele be woalé ŋku ɖe gaƒoɖokui ƒe kpododonu ŋu enumake. Zi geɖe la, wonyea ɖɔɖɔɖo bɔbɔewo:

Lock Kuxia Gbɔkpɔnuwo:

Ŋusẽzazã nyuie ƒe nyonyo na Aluminium Slide Windows

Fesre Siwo Li Fifia Gbugbɔgaɖɔɖo

Mègaɖɔli fesrewo haɖe o. Te nuwo ɖɔɖɔɖo kpɔ gbã. Eƒe asi bɔbɔ wu. Zi geɖe la, ewɔa dɔ nenema ke.

Ahom ƒe fesrewo wɔa nukunuwo. Wowɔa yaƒoƒo ƒe kotokuwo. Ya kuku xea mɔ na ya nyuie. Ahom siwo le eme la xɔa xɔa me bɔbɔe. Gometɔwo kpɔa ame ta nyuie wu.

Fesre Film ƒe Viɖewo:

Yame ƒe nɔnɔme ƒe vovototowo ɖeɖeɖa xɔa gaku geɖe. Edzraa dɔlarwo ɖo. Lé fɔ ɖe:

> Kpekpe ketekemɔwo le panelwo dome

> Tame kple ete ƒe haƒoƒo

> Axadzi jambs

> Dodokpɔ ɖesiaɖe si woate ŋu akpɔ

Caulking trea nubabla la nu. Zã nu nyuiwo:

> Silicone na agbenɔƒe didi

> Acrylic na nutata ƒe ŋutete

> Polyurethane hena asitɔtrɔ le nɔnɔmewo ŋu

Kpɔ ƒunukpeƒe ɖesiaɖe ɖa. Nutrenu le eme kple egodo. Do suesuesuewo gblẽa ŋusẽ gãwo dome.

Fesre Yeye Siwo Mezãa Ŋusẽzazã Nyuie Tiatia

NFRC ƒe ŋkɔwo gblɔa nyateƒe. Wole abe nunyiame ŋuti nyateƒenyawo na fesrewo ene. Di xexlẽdzesi siawo:

NFRC ƒe Dzidzedzekpɔkpɔ Veviwo:

> U-Factor: Lower = xɔxlɔ̃ nyuitɔ (ɖoe be 0.30 alo esi mede nenema o)

> SHGC: Ɣe ƒe dzoxɔxɔ ƒe viɖekpɔkpɔ ƒe xexlẽdzesi

> VT: Kekeli si wokpɔna ƒe kaka

> Ya ƒe sisi: Ele be wòanye ≤0.3

Yame ƒe nɔnɔme ƒe teƒewo bia be woawɔ specs vovovowo:

Dzoxɔxɔ ƒe ɖiɖiɖeme meganye nusi woate ŋu awɔ le wo ɖokui si o. Wole vevie ŋutɔ. Dzɔdzɔmeŋusẽ ƒe ɖiɖiɖeme ɖea dzoxɔxɔ ƒe tsɔtsɔ dzi kpɔtɔna 50%.

Glass ye wɔa vovototo gãtɔ kekeake. Double-pane suetɔ kekeake. Etɔ̃ na yame ƒe fafa. Tsɔ nɔnɔme siawo kpee:

> Low-E ƒe nutsyɔnu (ele be wòanɔ ame si) .

> Argon yɔyɔ (si sɔ fifia) .

> Dzoxɔxɔ-nugbɔ dometsotsowo

Dɔwɔwɔwo Kple Wo Zazã ƒe Nɔnɔmewo

Aƒemenɔƒe ƒe Dɔbiagbalẽviwo

Aluminium-fesre siwo wotsɔna ƒua du klẽna le aƒewo me. Wonye fefewɔla siwo te ŋu wɔa nu vovovowo. Xɔdɔmewo lɔ̃a nukpɔkpɔ siwo ŋu mɔxenu aɖeke mele o. Akpa siwo keke la nana dzɔdzɔmekekeli sɔa gbɔ wu. Modzakaɖeƒewo kpɔa viɖe tso gota gome yiyi bɔbɔe me.

Mlɔƒewo hiã nu vovovowo:

> Dɔwɔwɔ le ɖoɖoezizi me hena ŋdi siwo me ŋutifafa le

> Dedienɔnɔ ƒe ʋɔtruwo na anyigbaxɔdzowo

> Adzame glass tiatia siwo li

> Egress ƒe sedziwɔwɔ hena dedienɔnɔ

Dzodoƒe ƒe mɔzɔzɔ to mɔ dzi trɔa asi le modzakaɖeɖe ŋu. Gbugbɔ ʋuae be nàtsɔ ana amewo. Te ɖe eŋu be nuɖaɖa ƒe ʋeʋẽwo nanɔ eme. Ðoɖo siwo ame geɖe lɔ̃a wɔwɔ:

> Bar-kɔkɔme ƒe ɖoɖowo

> Counter ƒe mɔɖeɖe blibo

> Dzogoe dzi ʋuʋudedi ƒe ɖoɖowo

Teƒe Siwo Woaɖo Dɔwɔƒewo Le Aƒewo:

Sunroom ƒe kpeɖeŋutɔwo ɖe aluminium ƒe ŋusẽ fia. Wokpɔa nusiwo wotsɔ ɖoa ​​anyigba vaseɖe dzisasrã dzi gbɔ. Panel geɖewo naa xɔme-gota nɔnɔ.

Asitsatsa Ŋuti Dɔbiagbalẽviwo

Ɔfisxɔwo tiaa aluminum slidewo ɣesiaɣi. Nu ka ta? Wonye ʋiʋlilawo siwo mehiã beléle boo o. Dɔwɔƒea dzikpɔlawo kpɔa ŋudzedze ɖe alesi wònɔa anyi didinae ŋu. Dzɔdzɔmekekeli doa ŋusẽ dɔwɔwɔ.

Fiase siwo me wodzraa nu le bia be woalé ŋku ɖe wo ŋu:

> Teƒe gã siwo woɖea nu fiana le

> Asisiwo ƒe mɔɖeɖe bɔbɔe

> Yame ƒe nɔnɔme ƒe tsitretsitsi

> Dedienɔnɔ ƒe nɔnɔme siwo wotu ɖe eme

Asitsatsa ƒe Viɖewo le Dɔwɔƒewo Nu:

Ele be woabu lãmesẽdɔwɔƒewo ŋu etɔxɛe. Nusiwo le gbadzaa xea mɔ na dɔlékuiwo ƒe ƒuƒoƒo. Dɔwɔwɔ bɔbɔe kpena ɖe dɔnɔ siwo megate ŋu ʋãna o ŋu. Tagbɔdɔlélawo ƒe dɔwɔƒewo hiã dedienɔnɔ ƒe ahuhɔ̃e.

Sukuxɔwo hã lɔ̃a wo. Ŋkeke ƒe keklẽ sɔ gbɔ ɖe sukuxɔwo me. Dzadzraɖodɔwɔlawo kpɔa ŋudzedze ɖe agbenɔƒe didia ŋu. Nutome siwo tsia dzi ɖe gazazã ŋu dea asixɔxɔ agbenɔƒe ŋu.

Tamesusu Mamlɛawo

Aluminium slide fesrewo naa asixɔxɔ tɔxɛ aɖe. Wosẽ, wonɔa anyi didina, eye womeléa be na wo boo o. Àse vivi na ƒe 20-25 ƒe dɔwɔwɔ si ŋu kakaɖedzi le. Egbegbe dzoxɔxɔ ƒe ɖiɖiɖeme kpɔa ŋusẽ ƒe dzimaɖitsitsiwo gbɔ. Nusiwo wotsɔ blaa nu nyuie xea mɔ na xɔxlɔ̃ ƒe nyawo.

Ðo ŋku nu vevi siawo siwo ŋu nàbu dzi:

• Tia 3.0mm profiles be woanɔ anyi eteƒe nadidi

• De ga dzoxɔxɔ ƒe ɖiɖiɖemeɣiwo me be nàwɔ dɔ nyuie

• Tia ahuhɔ̃e si sɔ na wò yame ƒe nɔnɔme

• Kpɔ ɖaseɖigbalẽwo abe CSA kple NFRC ene ɖa

Wò fesre deblibo la nɔ te ɖe hiahiã tɔxɛwo dzi. Yame ƒe fafa ƒe teƒewoa? Tsɔ dzoxɔxɔ ƒe dɔwɔwɔ ɖo nɔƒe gbãtɔ. Ƒuta nutowo hiã be woaxe mɔ ɖe xɔxlɔ̃ nu. Egbegbe aƒewo ɖea vi tso aƒewo ƒe nɔnɔme tsɛwo me. Atsyã siwo wozãna le blema la bia be woawɔ tiatia siwo woatrɔ asi le.

Nuƒlela siwo tsia dzi ɖe gazazã ŋu kpɔnɛ be aluminum nye hoʋlila. Premium features dzia asixɔxɔ ɖe edzi evɔ womegbãa gadzraɖoƒewo o. Ga si wodzra ɖo ɣeyiɣi didi la xea ga si wozã le gɔmedzedzea me.

Èle klalo be yeawɔ asitɔtrɔ le eŋua? Dze egɔme kple wò nuhiahiãwo me dzodzro. Xɔ nyayɔyɔ geɖe tso installer siwo ŋu woɖo kpee gbɔ. Bia nu tso mɔɖegbalẽwo kple ŋusẽ ƒe dzidzenuwo ŋu. Bia adzɔnuwo ƒe kpɔɖeŋuwo hafi nàtsɔ ɖokuiwò ana.

Mègalala be fesre siwo do kpo nu nazi nyametsotsowo dzi o. Wɔ ɖoɖo ɖe wò asitɔtrɔ ŋu nyuie. Aluminium-fesre siwo wotsɔna ƒua du nyuie trɔa aƒewo. Wodzia akɔfafa ɖe edzi, woɖea ŋusẽzazã dzi kpɔtɔna, eye wodoa nunɔamesiwo ƒe asixɔxɔ ɖe ŋgɔ. Wɔ tiatia si me nunya le egbea.

Nya Siwo Wobiaa Enuenu Tso Aluminium Slide Fesrewo Ŋu

Q: Ɣeyiɣi didi kae aluminum-fesre siwo wotsɔna ƒua du la nɔa anyi zi geɖe?

A: Zi geɖe la, aluminum slide fesrewo nɔa anyi ƒe 20-25 ne wodzra wo ɖo nyuie. Nusiwo woɖo ɖe teƒe nyui aɖewo xɔa ƒe 30 kple edzivɔ. Wonɔa anyi didi wu vinyl fesrewo, siwo nɔa anyi ƒe 15-20 le mamã dedie nu. Woƒe anyinɔnɔ nɔa anyi didina tsoa akɔbli siwo mexɔa dzo o kple nusiwo wotsɔ blaa wo tae gbɔ.

Q: Ðe aluminum fesre siwo wotsɔna ƒua du la zãa ŋusẽ nyuiea?

A: Egbegbe aluminum fesre siwo wotsɔna ƒua du ate ŋu anye esiwo zãa ŋusẽ nyuie ne woƒe nɔnɔme sɔ. Togbɔ be aluminum kplɔa dzoxɔxɔ le dzɔdzɔme nu hã la, dzoxɔxɔ ƒe ɖiɖiɖeme nana dɔwɔwɔ nyona ɖe edzi ŋutɔ. Glazing eve tsɔtsɔ kpe ɖe eŋu kple Low-E coatings kple gas fills ɖea ŋusẽ ƒe bublu dzi kpɔtɔna 50% alo esi wu nenema.

Q: Ðe woate ŋu ata aluminum slide fesrewoa?

A: Ẽ, woate ŋu agbugbɔ ama aluminum slide fesrewo, togbɔ be ƒã hafi wòhiã hã. Powder coating alo PVDF ƒe nuwuwu nyuiwo nɔa anyi le fesrea ƒe agbenɔɣi katã. Ne èle nu dam ake la, zã gɔmedzenuwo kple amadede siwo sɔ siwo wowɔ na ganuwo.

Q: Vovototo kae le fesre siwo wotsɔna ƒua du ɖeka kple esiwo wotsɔna ƒua du eve dome?

A: Fesre ɖeka siwo woate ŋu aʋuʋu la ƒe akpa ɖeka le teƒe ɖeka eye ɖeka si ʋãna. Fesre eve siwo woate ŋu aʋuʋu la le fesre eve siwo woate ŋu aʋuʋu me, si wɔnɛ be woate ŋu age ɖe eme geɖe wu eye woate ŋu akɔ wo ŋu bɔbɔe tso eme. Slider eve naa ya si ade 50% tsɔ wu 50% si sɔ gbɔ wu na slider ɖeka.

Q: Ga home nenie aluminum-fesre siwo wotsɔna ƒua du la ƒe asi?

A: Aluminium-fesre siwo wotsɔna ƒua du ƒe asi nye dɔlar 29-33 le afɔ square ɖeka dzi le mamã dedie nu. Gazazã ƒe tiatia dzea egɔme tso $25, esime fesre nyuitɔwo kple dzoxɔxɔ ƒe ɖiɖiɖeme kple nunya ƒe nɔnɔmewo ɖoa $40+. Fesre si wozãna ɖaa (afɔ 15 sq) xɔa dɔlar 400-500 ne wotsɔe de eme.