Kastom aluminiɔm · wan opin ɔ wan prɔjek schedule
30 x 48 Windo we gɛt kesmɛnt
Difayn dimɛnshɔn, opin stayl ɛn glazing fɔ wan kɔstɔm aluminiɔm kesmɛnt winda. Send wan opin ɔ wan prɔjek schedule fɔ tɔk bɔt yu kot.
Sayz rikwest: 762 × 1219.2 mm
Start wit di saiz bies
30 x 48 Kesmɛnt Windo Dimɛnshɔn ɛn Ɔpin Chɛk
Width de kam fɔs: 30 in W × 48 in H de kɔnvɔyt to 762 × 1219.2 mm. Lebul wetin dɛn mɛzhɔmɛnt dɛn de tɔk bɔt.
Nominal saiz
Di saiz lɛbl we dɛn aks fɔ ɔ we dɛn advatayz.
Fram we dɔn dɔn
Di winda we dɛn mek in ɔdasay freym dimɛnshɔn dɛn.
Raf opin we yu de opin
Di wɔl opin we de tek di winda ɛn instɔleshɔn gap dɛn.
Net klia opin
Di yuzable opin wit di selekt hadwae we de wok nɔmal wan.
Di kɔnsɛpt dɛn fɔ mɛzhɔ. Yuz di kɔnfigyushɔn drɔin fɔ instɔleshɔn dimɛnshɔn dɛn.
Fram 30×48 we yu kin yuz
spɛsifa di ɔdasay freym we dɛn aks fɔ ɛn if dɛn ad fin ɔ sabfrɛm dɛn de insay; di kɔnfigyushɔn drɔin de sɛt sash dimɛnshɔn, tolɛreshɔn ɛn instɔleshɔn kliarens.
Di wan we de opin 30×48
gi di opin we dɛn mɛzhɔ; di sistɛm in instɔleshɔn ditil dɛn de sho di freym we dɔn dɔn ɛn di gap dɛn. Yuz di drɔin we dɛn dɔn gri fɔ fɔ ɔda.
24×48 na wan we smɔl pas am; 36×48 na di wan we wayd pas am; 32×48 na difrɛn saiz. Ɛni wan nid in yon opin ɛn layout rivyu.
Muvmɛnt · ɔpreshɔn · layout
Pik di Opin Dairekshɔn ɛn di Opareshɔn Layout
Mek tri tin dɛn fɔ disayd: aw di sash de muv, aw yu de yuz am, ɛn aw dɛn arenj di pat dɛn we pɔsin kin yuz ɛn we nɔ de chenj.
Outward sayd-hang + krank · 72 sistem
Yuzful we yu de push di sash na awkward; chɛk krank rich ɛn ɛkstirian kliarens.
Luk dis sistɛmOutward sayd-hang + handel · S9
Kip di sash na do; chɛk rich, skrin, shata ɛn klin akses.
Luk dis sistɛmInward / tilt-ɛn-tɔn · E5N
Ɛksplɔrɔ we dɛn nɔ de muv na do; alaw ples fɔ fɔnicha, blaynd ɛn fɔ tɔn di sash.
Luk dis sistɛmRivyu di 100 krank-ɔut sistem sɛpret fɔ ɔp-hang ɔpreshɔn. Fɔ ɛvri rod, mach yu freym ɔ opin rikwest to di sistɛm drɔin we yu dɔn pik.
Katalog opin-panɛl rɛnj dɛn difrɛn frɔm di ɔvala freym saiz. Rikwest fɔ mek yu drɔ layout fɔ yu 30 × 48 freym ɔ di opin we dɛn mɛzhɔ.
Mak di sayd we yu de si, hinj ɛn ɔpreshɔn na di ɛleveshɔn. If yu sheb di totɛl wit bay tu, dat nɔ de sho di sayz dɛn we di sash gɛt. Dabl glas min tu glas pan; dabl kesmɛnt min tu ɔpreshɔn sash.
Bil di spesifikeshɔn
Spɛsifik Fraym, Glas, Finish, Skrin ɛn Hadwɔd
Difayn ɛni aytem apat so dat di kɔnfigyushɔn drɔ ɛn kot de diskrayb di sem winda.
- Fram sistem kɔnstrɔkshɔn, tɛmal-brɛk rikwaymɛnt, profayl dip, saytlayn ɛn instɔleshɔn intafɛs. Profayl dip nɔmɔ nɔ de difayn di wɔl fit.
- Glas bil-ap, prayvet pat, sef ɛn solar-kɔntrol nid. Match Low-E ɛn glazing choices to whole-window targets.
- Finish spɛsifa intɛriɔ ɛn ɛkstirian kɔlɔ dɛn sɛpret.
- Hadwɔd pik ɔpreshɔn, hinj, lɔk ɛn ɛni ristrikt togɛda.
- Skrin difayn pozishɔn, we fɔ opin ɔ pul, ɛn fɔ put kot. Kɔdinɛt di ristrikt ɛn skrin dɛn wit ɛnitin we dɛn nid fɔ opin fɔ rɔnawe.
Fit di ples we de rawnd am
Chek Rich, Kliarens ɛn Prayvesi Bifo Yu Ɔda
Di ples we de rawnd de ɛp fɔ no us opareshɔn ɛn glazing chus go wok we yu de yuz am ɛvride.
Abov wan kɔnta
Chek di ɔpreshɔn ayt, rich pas di kɔwnta ɛn skrin akses. Krank kin ɛp nɔmɔ we in handel stil de we pɔsin kin ebul fɔ go.
Klostu to rod, bolkɔn ɔ shata
Chek di ful ekstirian swip ɛn di opin dɛn we de nia. Wan rod we de go insay nid klia ples insay os insted.
Bathroom ɔ shawa sayd
Balans prayvet pat, de layt ɛn ventileshɔn. Pik sefty glazing fɔ di ples fɔ instɔl ɛn di lokal rikwaymɛnt dɛn; prayvet glas nɔmɔ nɔ de difayn sef suitability.
Frɔm sistem to di ɔda wan
Match Tɛknikal Dokumɛnt dɛn to Yu Projɛkt Rikwaymɛnt dɛn
Yuz dɔkyumɛnt fɔ di sistɛm we yu dɔn pik, glazing, ɔpreshɔn ɛn saiz fɔ asɛs yu prɔjek target dɛn.
| Projek prayoritɛd | Rivyu togɛda |
|---|---|
| Insuleshɔn we dɛn kin yuz | Whole-window U-factor/Uw, freym, glazing ɛn spɛshal kɔnstrɔkshɔn. |
| Strɔng san layt | SHGC/g-valyu, de layt, ɔriɛnteshɔn ɛn shed. |
| Wind, ren ɔ kɔstal ɛksplɔshɔn | Disain kɔndishɔn, ɛya/wata/strɔkchɔral ripɔt, ɛn finish/hadwɔd suitability. |
| Escape, sef ɔ nɔys | Nɔmal-ɔpreshɔn klia opin, sefty glazing ɛn rilevɛns ɔl-windo ripɔt. |
Kɔmpia di yunit dɛn we de mach, di we aw dɛn de du am ɛn di rɛfrɛns saiz dɛn. Glass Ug ɛn ɔl-windo Uw de tɔk bɔt difrɛn tin dɛn; tεmכl brek כ Low-E nכmכ de establish di komplit winda in pכrfomans.
Eksplɔrɔ sistem kɔnstrɔkshɔn fɔs, dɔn aks fɔ drɔ ɛn ripɔt fɔ yu kɔnfigyushɔn.
Lan mɔ
Luk di sistem dɛn katalog ɛn di prɔdak ɔvaviu dɛn.
Mach
Rivyu kɔnfigyushɔn, klia-opin, instɔleshɔn-intafɛs ɛn aplikebul pefɔmɛns dɔkyumɛnt dɛn.
Kip
Ritain apruv rivishɔn, opin ID, saplae tɛm ɛn mentenɛns rɛkɔd fɔ handover.
Wan yusful kot bigin ya
Pripia wan Kɔmparabl Projɛkt Kɔt
Start wit 4 input grup dɛn. Ad drɔin, foto ɛn di de we yu nid we i de.
Di say we dɛn de go ɛn usay dɛn de yuz am
Kɔntri, siti ɛn bildin yus.
Ɔmɔs
Wan-opin rikwest ɔ winda schedule.
Dimenshɔn ɛn instɔleshɔn
Fram/opin besis, yunit ɛn nyu-bil/riplesmɛnt kɔntɛks.
Di tin dɛn we yu lɛk fɔ du
Di opareshɔn, glas, finish ɛn aksesɔri nid dɛn we dɛn sabi.
Fɔ wan opin, bigin wit mɛzhɔmɛnt ɛn foto dɛn; ɔda ɛligibiliti, di minimum bil eria ɛn sampling na kot aytem. Fɔ prɔjek, stat wit opin ID ɛn kwantiti.
Aprɔval ɛn handover
Kɔdinɛt Drawings, Ɔda Kɔnfɔmeshɔn ɛn Delivri
Kip dimɛnshɔn, kɔnfigyushɔn ɛn saplai skɔp pan di sem apruv rivishɔn.
Gri
Chek freym/opin dimɛnshɔn, viewing sayd, opareshɔn, glazing, finish ɛn kot skɔp.
Fri
Gri di prodakshɔn-start besis, inklud di drɔ aprɔval ɛn pemɛnt kɔndishɔn.
Gɛt
Seperet prodakshɔn kɔmplitmɛnt, freyt handɔva ɛn dɛstineshɔn araval. Alɔkat ɔndo, stɔrɔj ɛn damej inspekshɔn.
Fɔ batch, link di apruv tayp ɔ sampul, drɔ rivishɔn ɛn glas/finish/hadwɔd kɔmbayn to opin ID dɛn. Rikɔd chenj dɛn ɛn gri fɔ ɛni plan fɔ sɛn di tin dɛn we dɛn dɔn mek bay smɔl smɔl.
DERCHI we de mek tin dɛn
Manufakchurin Sɔpɔt, Waranti ɛn Afta-Sɛl Rivyu
Evaluate DERCHI in manufakchurin bakgrɔn nia di rayt sɔpɔt tɛm fɔ di winda we yu dɔn pik.
Rivyu di kɔmpɔnɛnt dɛn we dɛn kɔba, di de we dɛn bigin, di tin dɛn we dɛn nɔ put insay ɛn di arenjmɛnt fɔ di savis fɔ di say we dɛn want fɔ go. Kip di mɔdel/ɔda aydentifikeshɔn ɛn mentenɛns rɛkɔd fɔ riplesmɛnt-pat diskishɔn.
Bifo yu ɔda
Kwɛstyɔn dɛn Bifo Yu Ɔda
Rizolt di ɔda fit ɛn saplae kwɛstyɔn dɛn bifo yu rilis wan ɔda.
Di nɛks tin we yu fɔ du
Send Yu Window Schedule fɔ wan Projek Kɔt
Sheb wan opin ɔ yu prɔjek schedule fɔ bigin wan kɔnfigyushɔn ɛn sapla-skɔp diskishɔn. Put drɔin ɔ foto dɛn we yu gɛt.
Di say we yu want fɔ go / yuz
Kɔntri, siti, bildin yus.
Kwantiti / schedule
Wan opin ɔ projɛkt kwantiti dɛn.
Dimenshɔn baysis
Fram ɔ opin; yunit dɛn; instɔleshɔn kɔntɛks.
Opareshɔn / glazing
Muvmɛnt, ɔpreshɔn ɛn prɛferɛns dɛn we dɛn no.
