aw fɔ instɔl domɔt we de na do

Yu ekstirian domɔt dɛn fɔ ɔpgrɛd? If yu put nyu domɔt na do, dat kin rili mek yu os sef, yu nɔ go yuz bɔku ɛnaji, ɛn i go mek yu os luk fayn. Bɔt, di prɔses kin tan lɛk se i nɔ izi fɔ du if yu nɔ ɛva du am bifo.

Nɔ wɔri! Insay dis kɔmprɛhnsiv gayd, wi go waka yu tru di stɛp-by-stɛp prɔses fɔ instɔl wan domɔt we de na do. Frɔm di we aw yu pik di rayt kayn domɔt to we yu nɔ de yuz di wɛda ɛn fɔ dɔn di tin dɛn we yu fɔ du, wi dɔn kɔba yu.

Ilɛksɛf yu na pɔsin we lɛk fɔ du DIY ɔ yu na pɔsin we gɛt os fɔ di fɔstɛm, dis atikul go gi yu di no ɛn kɔnfidɛns fɔ takɛl dis prɔjek ed-ɔn. Rɛdi fɔ chenj di say we yu de go insay yu os wit wan fayn, sikrit, ɛn we nɔ de yuz bɔku ɛnaji na do.

Tayp dɛn fɔ di domɔt dɛn we de na do

We i kam pan fɔ pik wan exterior door , sɔm kɔmɔn kayn dɛn de fɔ tink bɔt. Ɛni kayn tin gɛt in yon tin dɛn ɛn bɛnifit dɛn, we mek i fayn fɔ yuz difrɛn tin dɛn. Lɛ wi tek tɛm luk sɔm pan di kayn domɔt dɛn we pipul dɛn lɛk fɔ du na do.

Doa dɛn we de Slayd

Slaydin domɔt na fayn opshɔn fɔ yuz insay ɛn na do. Dɛn pafɛkt fɔ transishɔnal eria bitwin indo ɛn ɔda ples, lɛk patio ɔ balkɔn. Slaydin domɔt dɛn kin sev ples ɛn dɛn kin mek yu luk mɔdan ɛn slip. Fɔ ɛkstirian aplikeshɔn, dɛn nid fɔ ɛnhans siling ɛn wɛdapruf fɔ mek shɔ se dɛn wok fayn fayn wan.

Bifold Doa dɛn

Bifold doa na ɔda tin we yu kin pik fɔ du bɔku tin. Dɛn kin yuz dɛn insay os fɔ kloz ɔ rum divayda, ɛn na do fɔ kɔnɛkt living ples wit patio ɔ kɔt. We dɛn opin ful wan, bifold domɔt dɛn kin mek wan big opin we nɔ gɛt wan sik ɛn we kin miks di insay ɛn di domɔt. Fɔ yuz na do, dɛn nid kɔstɔm dizayn we nɔ go mek briz ɛn wata nɔ go insay.

Swing Doa dɛn

Swing domɔt na di kayn domɔt we dɛn kin yuz fɔ mek insay os, bɔku tɛm dɛn kin yuz am fɔ bedrum, batrum, ɛn ɔfis. Dɛn kin bi bak domɔt dɛn we de na do, lɛk fɔ go insay gadin ɔ sayd, we dɛn bil dɛn wit tin dɛn we strɔng lɛk mɛtal ɔ wud we dɛn dɔn riinfɔs ɛn we dɛn mek am fayn.

Garaj Doa dɛn

Garaj domɔt na wan tipik domɔt we de na do nɔmɔ, we de kɔnɛkt di garaj to di domɔt. Dɛn nid fɔ mek di briz nɔ blo, dɛn nid fɔ mek wata nɔ go insay dɛn, ɛn dɛn nid tin dɛn fɔ mek dɛn nɔ gɛt sikyɔriti. Garaj domɔt dɛn na impɔtant pat pan os in domɔt ɛn dɛn kin rili ɛp fɔ protɛkt motoka dɛn ɛn tin dɛn we dɛn kin kip.

We yu de pik domɔt we de na do, tink bɔt tin dɛn lɛk:

- Material (Aluminiɔm,wud, fayv glas, stɛl)

- Insuleshɔn prɔpati dɛn (tɛmal pefɔmɛns) .

- Stayl ɛn dizayn (fɔ mach yu os in akitɛkɛt)

Yu fɔ mɛmba se di domɔt dɛn we de na do gɛt difrɛn tin dɛn we dɛn nid pas di domɔt dɛn we de insay. Dɛn nid fɔ bia wit di wɛda, fɔ mek dɛn gɛt bɛtɛ insuleshɔn, ɛn fɔ mek dɛn gɛt mɔ sikyɔriti. Mek shɔ se dɛn mek di domɔt we yu dɔn pik fɔ yuz na do ɛn i mit ɔl di standad dɛn we yu nid.

Tul ɛn Matirial dɛn we dɛn nid

Bifo yu bigin fɔ instɔl yu nyu domɔt na do, i rili impɔtant fɔ gɛda ɔl di tul ɛn tin dɛn we yu nid. If yu gɛt ɔltin na yu an, dat go mek di wok go fayn ɛn i go wok fayn. Mek wi tek wan luk pan wetin yu go nid.

Impɔtant Tul dɛn

- Tep mɛzhɔ: Yu go yuz am fɔ mɛzhɔ di rɔf opin ɛn mek shɔ se i fit fayn fayn wan.

- Level: 2-fut ɛn 4-fut lɛvɛl go ɛp yu fɔ chɛk se ɔltin na plumb ɛn lɛvɛl.

- Skwea: Framing square impɔtant fɔ chɛk di kɔna dɛn na di opin.

- Hama: Yu go nid am fɔ pul di ol domɔt ɛn freym, ɛn fɔ instɔl shims.

- Dril: Pawa drɔl go mek fɔ instɔl skru ɛn mek payɔt ol dɛn izi pasmak.

- Skru drayva: Gɛt ɔl tu di Phillips ɛn flat-hɛd skru drayva dɛn na yu an.

- Spɛshal tul dɛn:

  - Kɔna brakɛt kɔnɛkta dɛn: Dɛn kin yuz dɛn fɔ jɔyn di freym kɔna dɛn fayn fayn wan.

  - 90° sil strip siza: Dɛn wan ya kin mek fɔ kɔt wedastrip na di rayt angle na briz.

Di tin dɛn we dɛn kin yuz fɔ mek tin dɛn

- Shims: Dɛn kin yuz wud shim fɔ ajɔst ɛn sikyurɛt di domɔt frem na di opin.

- Kɔlk: Yu go nid ay kwaliti, ɛkstirian-grɛd kɔl fɔ sial ɛn wedapruf.

- Skru: Yuz ɛkstirian-grɛd skru, tipikli #8 x 2.5' ɔ 3', fɔ mek yu nɔ rɔsti.

- Weatherstripping: I de ɛp fɔ sial gap ɛn mek draft nɔ kam rawnd di domɔt.

- Insuleshɔn: Bɔku tɛm dɛn kin yuz fayv glas insuleshɔn fɔ ful-ɔp di say dɛn we nɔ de bitwin di freym ɛn di wɔl.

- Spɛsifi k komponent dɛn:

  - Sill pan kit: Na impɔtant watapruf kɔmpɔnɛnt we de sidɔm ɔnda di domɔt trɛshɔld.

  - Kɔna sil pad: Dɛn pad ya de ɛp fɔ sial di bɔt kɔna dɛn na di freym agens wata we nɔ go insay.

Apat frɔm dɛn tin ya, yu kin nid yutiliti naif, pry bar, ɛn sef gia lɛk glɔv ɛn ay protɛkshɔn. Rid di instrɔkshɔn dɛn we di wan we mek am gi fɔ ɛni ɔda tul ɔ tin dɛn we spɛshal fɔ yu domɔt.

If yu gɛt di rayt tul ɛn matirial dɛn we yu dɔn rɛdi, dat go mek yu gɛt sakrifays we yu de instɔl yu nyu domɔt we de na do.

Fɔ Pripia fɔ Instɔl

Bifo yu dayvɔs fɔ instɔl yu nyu domɔt na do, sɔm impɔtant tin dɛn de fɔ mek shɔ se di wok go fayn ɛn go bifo. Fɔ pripia fayn na di men tin fɔ mek yu ebul fɔ instɔl di domɔt fayn fayn wan, we nɔ gɛt wan prɔblɛm, ɛn we go de fɔ lɔng tɛm.

Fɔ Mekɔp di Raf Opin

Di fɔs tin we yu fɔ du na fɔ mɛzhɔ di rɔf rɔf opin fɔ yu nyu domɔt. Na dis na aw fɔ du am:

1. Mekɔp di waid we de ɔp, midul, ɛn dɔŋ di say we dɛn opin. Yuz di mɛzhɔmɛnt we smɔl pas ɔl.

2. Mekɔp di ayt na ɔl tu di say dɛn we di opin. Bak, yuz di smɔl mɛzhɔmɛnt.

3. Chek di dip we di opin fɔ mek shɔ se i go ebul fɔ put di nyu domɔt.

Fɔ Put di Ol Doa ɛn di Frɛm

Neks, na tɛm fɔ pul di ol domɔt, di freym, ɛn di trim. Fɔ fala dɛn advays ya fɔ mek yu pul am klin:

- Skɔ di pent simpul bitwin di trim ɛn di wɔl wit yutiliti nɛf. Dis kin mek di pent nɔ kin kɔmɔt na di wɔl we yu pul di trim.

- Start fɔ pul di domɔt frem frɔm di tap ɛn wok yu we dɔŋ. Dis kin mek di wɔl we de rawnd di wɔl nɔ pwɛl bɛtɛ.

- Yuz pry bar fɔ tek tɛm pul di trim pis dɛn. If yu plan fɔ yuz dɛn bak, put dɛn na sayd sef wan.

Inspek ɛn Pripia di Raf Opin

We yu dɔn pul di ol domɔt, chɛk di rɔf opin gud gud wan:

- Chek if di opin de levul, plumb, en skwea. Yuz wan lɛvul ɛn freym skwea fɔ mek yu ebul fɔ mɛzhɔ kɔrɛkt wan.

- Mek ɛni ripa ɔ ajɔstmɛnt we nid fɔ mek di opin. Dis kin inklud fɔ ad shim ɔ mek smɔl smɔl chenj dɛn na di freym.

- Mek shɔ se di opin na di rayt saiz fɔ yu nyu domɔt, wit inof kliarens fɔ instɔleshɔn ɛn ɛni insuleshɔn ɔ wɛdapruf matirial we nid.

If yu tek yu tɛm fɔ mɛzhɔ fayn, pul di ol domɔt, ɛn pripia di rɔf opin, yu go sɛt yusɛf fɔ wan saksesful ɛkstirian domɔt instɔleshɔn.

Step-by-Step Instɔlɛshɔn Prɔses

Naw we yu dɔn pripia di rɔf opin, na tɛm fɔ instɔl yu nyu domɔt we de na do. Fɔ fala dɛn step ya fɔ mek yu instɔl am fayn fayn wan.

1. Instɔl di Sill Pan (If I Apɔynt) .

- Di sill pan na wan impɔtant kɔmpɔnɛnt. I kin sidɔm ɔnda di domɔt ɛn i kin mek wata nɔ go insay yu os.

- Fɔ instɔl am, put tri bidz kɔlk along di lɔng we di opin de. Pres di sill pan insay di kol ɛn mek shɔ se i lɛvɛl.

2. Put di Doa Yunit na di Opin

- Sɛnt di domɔt yunit na di opin. Put di bɔt ɔf di domɔt pan di sil pan fɔs, dɔn tilt am ɔp insay in ples.

- Yuz shims fɔ mek di domɔt sikrit fɔ sɔm tɛm. Mek shɔ se i plumb ɛn lɛvɛl bifo yu go bifo.

3. Shim ɛn Sikyu di Hinge-Side Jamb

- Put shims biɛn ɛni hinj ples na di hinj-sayd jamb. Dis kin mek shɔ se di domɔt go hang fayn fayn wan.

- Yuz wan lɛvɛl fɔ plumb di hinj-sayd jamb. We i dɔn plumb, sikyuɔr am wit skru dɛn tru di shims.

- Fɔ ad sɔpɔt, instɔl ɔda skru dɛn na di ɔp ɛn dɔŋ hinj dɛn.

4. Adjɔst ɛn Sikyu di Strayk-Sayd Jamb

- Adjɔst di strayk-sayd jamb te ivin gap de bitwin am ɛn di domɔt. Di wɛdastrip fɔ mek kɔnsistɛns kɔntakt wit di domɔt.

- Put shims biɛn di strayk plet ples ɛn na di tap ɛn dɔŋ pat pan di strayk-sayd jamb. Sikyuɔr wit skru dɛn.

5. Instɔl Do Hadwɔd

- Instɔl di lɔksɛt ɛn strayk plet akɔdin to di manifakta in instrɔkshɔn.

- If yu domɔt gɛt trɛshɔld we yu kin ajɔst, ajɔst am naw fɔ mek i kɔntakt di domɔt bɔt fayn fayn wan.

- Chek di doa in opareshon. Opin ɛn lɔk am fɔ mek shɔ se i de wok fayn fayn wan ɛn mek i latch fayn fayn wan.

6. Inshɔlet ɛn Sial di Doa

- Instɔl insuleshɔn na di gap bitwin di domɔt frem ɛn di rɔf opin. Dis kin ɛp fɔ yuz ɛnaji fayn fayn wan.

- Put kɔlk along di intɛriɔ ɛn ɛkstirian pan di domɔt frem fɔ sial ɛni gap ɔ jɔyn.

- Fɔ mek yu nɔ ebul fɔ du di wɛda na do, put wan bidz we gɛt kɔlk rawnd di perimita fɔ di domɔt frem usay i mit di saydin.

7. Instɔl Intɛriɔ ɛn Ɛkstirian Trim

- Mɛzhɔ, kɔt, ɛn instɔl di intɛriɔ ɛn ɛkstirian trim pis dɛn. Mitre di konas fo wan profeshonal luk.

- Fil ɛni nel ol wit wud puti ɛn kɔl di jɔyn dɛn bitwin di trim ɛn di domɔt frem.

- Peint ɔ stɛyn di domɔt ɛn trim fɔ mek i mach yu os in ɛkstirian fɔ mek i luk polish, dɔn.

If yu fala dɛn step ya, yu go dɔn go fayn fɔ go na wan domɔt we dɛn dɔn instɔl fayn fayn wan na do.

Fram Asembli ɛn Hadwɔd Instɔlɛshɔn

Fɔ gɛda di domɔt frem na impɔtant tin fɔ mek yu put yu domɔt we de na do. I de mek shɔ se di domɔt fit fayn ɛn i de wok fayn fayn wan. Na dis na wetin yu nid fɔ du:

Assembling di Door Frame Komponent dɛn

Fɔs, kɔnɛkt di kɔna brakɛt dɛn fɔ jɔyn di freym pat dɛn togɛda. Mek shɔ se yu put watapruf silin na di jɔyn dɛn fɔ mek ɛni mɔstɔ nɔ go insay.Dis go ɛp fɔ protɛkt yu domɔt frɔm di tin dɛn we de apin.

Neks, chɛk tu tɛm fɔ si if di freym alaynɛd ​​fayn fayn wan. Yu wan mek shɔ se i skwea ɛn lɛvul. Sikyuɔr di freym kɔmpɔnɛnt dɛn tayt wan yuz di rayt fastɛns dɛn. Frɛm we dɛn dɔn gɛda fayn fayn wan na di men tin fɔ mek yu gɛt domɔt we go de fɔ lɔng tɛm ɛn we nɔ gɛt prɔblɛm.

Instɔl ɛn Adjɔst di Doa Hadwɔd

Naw na tɛm fɔ instɔl di domɔt hadwɔd. Dis inklud hinj, handel, lɔksɛt, ɛn strayk plet. Fɔ fala di instrɔkshɔn dɛn we di wan we mek am gi gud gud wan fɔ ɛni wan pan di tin dɛn.

Start bay we yu tay di hinj dɛn to di domɔt ɛn di freym. Mek shɔ se dɛn alaynɛd ​​fayn ɛn snug. Dɔn, instɔl di handel ɛn lɔksɛt akɔdin to di tɛmplat dɛn we dɛn gi. Fɔ dɔn, tay di strayk plet to di freym, mek shɔ se i alaynɛd ​​wit di lɔksɛt.

We dɛn dɔn instɔl ɔl di hadwɔd, na tɛm fɔ fayn fayn wan fɔ mek di domɔt wok fayn. Chek se di domɔt opin ɛn lɔk fayn fayn wan we nɔ gɛt ɛnitin fɔ tay am ɔ rɔb am. Adjɔst di hinj ɛn strayk plet as nid de fɔ mek yu fit fayn fayn wan.

Nɔ fɔgɛt fɔ tɛst di lɔksɛt fɔ mek shɔ se i de ɛnjɔy fayn wit di strayk plet. Mek ɛni ajɔstmɛnt we nid fɔ mek yu lɔk am fayn fayn wan.

We yu tek yu tɛm fɔ gɛda di freym ɛn instɔl di hadwae kɔrɛkt wan, yu go mek shɔ se yu domɔt we de na do de wok fayn fayn wan fɔ lɔng lɔng tɛm.

Trobul fɔ Sɔlv Kɔmɔn Isyu dɛn

Ivin if yu dɔn instɔl am pafɛkt wan, yu kin gɛt sɔm prɔblɛm dɛn wit yu domɔt we de na do. Bɔt nɔ wɔri! Bɔku pan dɛn prɔblɛm dɛn ya gɛt simpul we fɔ sɔlv dɛn. Lɛ wi tek wan luk pan sɔm kɔmɔn prɔblɛm dɛn ɛn aw fɔ sɔlv dɛn.

Doa Nɔ Klos ɔ Latch Fayn

If yu domɔt nɔ de lɔk ɔ nɔ de lɔk kɔrɛkt wan, di fɔs tin we yu fɔ chɛk na di alaynɛshɔn. Mek shɔ se di domɔt alaynɛd ​​fayn fayn wan wit di freym. Yu kin ajɔst dis bay we yu lus di hinj dɛn ɛn put di domɔt bak.

Wan ɔda tin we kin mek i apin na wan strayk plet we nɔ alaynɛd. If di lat nɔ layn wit di ol na di strayk plet, i nɔ go ɛnjɔy fayn. Luz di skru dɛn ɛn ajɔst di pozishɔn we di strayk plet de te di lɛt fit fayn fayn wan.

Gap ɔ Draft dɛn we de rawnd di domɔt

Gap ɔ dray we de rawnd yu domɔt we de na do kin mek kol briz, wet, ɛn ivin peshɛnt dɛn kam insay. Fɔ fiks dis, chɛk di weatherstripping. If i dɔn wɛr ɔ i dɔn pwɛl, chenj am. Yu kin fɛn weatherstripping na yu lokal hadwae stoa.

If di gap de dɔŋ di domɔt, yu go nid fɔ ajɔst di trɛshɔld. Bɔku pan di trɛshɔld dɛn kin es ɔ dɔŋ wit skru drayva fɔ mek i fit fayn fayn wan agens di bɔt ɔf di domɔt.

Adjusting Hinges ɔ Strike Plɛt dɛn

Di hinj dɛn we lɔs ɔ we nɔ alaynɛd ​​kin mek di domɔt sag ɔ nɔ lɔk fayn. Fɔ fiks dis, bigin bay we yu tay di skru dɛn. If dat nɔ wok, yu go nid fɔ put di hinj dɛn bak. Luz di skru dɛn, ajɔst di pozishɔn we di hinj de, dɔn tayt di skru dɛn bak.

Fɔ strayk plet ishu, di sem prinsipul de aplay. Luz di skru dɛn, ajɔst di pozishɔn we di strayk plet de so dat i go alaynɛd ​​wit di lat, dɔn tay di skru dɛn bak dɔŋ.

Mɛmba se if yu sɔlv smɔl prɔblɛm, dat kin ɛp yu fɔ mek shɔ se yu domɔt we de na do de wok fayn fɔ lɔng lɔng tɛm.

Tin dɛn bɔt aw fɔ mɛn ɛn aw fɔ kia fɔ am

Yu domɔt we de na do de sho di tin dɛn we de apin ɛvride. Fɔ mek i luk fayn ɛn wok fayn, yu fɔ mek i fayn ɔltɛm. Na sɔm advays dɛn ya we go ɛp yu fɔ kia fɔ yu domɔt.

Fɔ Klin ɛn Inspekshɔn Ɔltɛm

Dɔti, dɔst, ɛn dɔti kin gɛda na yu domɔt as tɛm de go. Gi am gud klin ɛvri sɔm mɔnt. Yuz saf klos ɔ brɔsh wit wan mild ditajɛnt sɔlvushɔn. Nɔ yuz bad bad kemikal dɛn we go pwɛl di finish.

We yu de klin, tek di chans fɔ chɛk yu domɔt. Luk fɔ ɛni sayn we de sho se i dɔn west, i dɔn pwɛl, ɔ i dɔn pwɛl. If yu kech smɔl smɔl tin dɛn kwik kwik wan, dat kin mek yu nɔ gɛt big prɔblɛm dɛn we de dɔŋ di layn.

Lubrik Hinj ɛn Hadwɔd

Hinj dɛn we de swɛt ɔ lɔk dɛn we stif kin mek pɔsin vɛks. Di tin we impɔtant pas ɔl na dat, dɛn kin mek yu domɔt west we yu nɔ nid. Fɔ mek dis nɔ apin, yu fɔ rɔb ɔl di pat dɛn we de muv ɔltɛm. Dis inklud hinj, lɔk, ɛn handel.

Yuz layt lɔbrik, lɛk WD-40 ɔ silikon sprɛy. Put smɔl pan ɛni wan pan di tin dɛn ɛn was ɛnitin we pasmak. Dis go mek yu domɔt wok fayn fayn wan.

Ripeint ɔ Steyn Wud Doa dɛn

Wud domɔt dɛn nid smɔl mɔ TLC pas ɔda matirial dɛn. If yu domɔt de luk dɔl ɔ di pent de chip, na tɛm fɔ mek yu rifresh. Sand dɔŋ di surface fɔ mek wan smol bays. Dɔn, put fresh kot fɔ peint ɔ stɛyn. Mek shɔ se yu pik wan ay kwaliti ɛkstirian prodak fɔ di bɛst protɛkshɔn.

Nɔ fɔgɛt fɔ sial ɛni ɛj we de na do fɔ mek di wata nɔ pwɛl. If yu mentenɛns smɔl, dat go ɛp yu fɔ mek yu wud domɔt liv lɔng.

Riples Weatherstripping ɔ Sil dɛn

As tɛm de go, di wɛdastrip ɛn di sil dɛn kin west ɔ pwɛl. Dis kin mek di wata we de rɔn, lik, ɛn ivin peshɛnt dɛn kin kam insay. Inspek dɛn komponent ya ɔltɛm ɛn chenj dɛn as nid de.

Bɔku pan di wɛdastrip dɛn kin izi fɔ chenj. Jɔs pul di ol strip ɛn instɔl nyu wan na in ples. Fɔ swip di domɔt ɔ fɔ mek yu ebul fɔ yuz di domɔt, yu go nid fɔ pul di domɔt fɔ mek i izi fɔ yu fɔ go insay. Rid di instrɔkshɔn dɛn we di wan we mek am gi fɔ patikyula gayd.

If yu fala dɛn simpul tin ya fɔ mek yu mentenɛns, yu go mek shɔ se yu domɔt we de na do kɔntinyu fɔ fayn, sef, ɛn yuz ɛnaji fɔ lɔng lɔng tɛm.

Dɔn

Fɔ instɔl domɔt we de na do na impɔtant wok fɔ mek di os fayn. Wan domɔt we dɛn dɔn instɔl fayn fayn wan kin mek i gɛt mɔ sikyɔriti, i kin yuz mɔ ɛnaji, ɛn i kin mek i fayn fɔ di kɔba. We yu fala wi kɔmprɛhnsiv stɛp-by-stɛp gayd, yu kin tek kɔnfidɛns fɔ tek dis prɔjek yusɛf.

Mɛmba fɔ put sef fɔs ɔlsay na di instɔleshɔn prɔses. Wear di rayt tin fɔ protɛkt yusɛf ɛn fala di instrɔkshɔn dɛn we di wan we mek am gi gud gud wan.

If yu mit ɛni prɔblɛm ɔ yu fil se yu nɔ shɔ ɛni tɛm, nɔ shem fɔ go to pɔsin we sabi du di wok fɔ mek i go gayd yu.

If yu tek tɛm plan ɛn du am, yu go ebul fɔ instɔl yu nyu domɔt na do fayn fayn wan ɛn ɛnjɔy di bɛnifit dɛn we i go gɛt fɔ lɔng lɔng tɛm.

FAQs Bɔt fɔ Instɔl Ɛkstirian Doa dɛn

K: Aw lɔng i kin tek fɔ instɔl ɛkstirian domɔt?

A: Fɔ instɔl ɛkstirian domɔt kin tek 4-8 ​​awa ɛn i kin nid tu pipul fɔ sɔm stɛp dɛn.

K: A kin instɔl ɛkstirian domɔt misɛf, ɔ a fɔ haya pɔsin we sabi du in wok?

A: Yu kin instɔl ɛkstirian domɔt yusɛf if yu gɛt di tul ɛn skil dɛn we yu nid. Bɔt, go to pɔsin we sabi du di wok if yu nɔ shɔ.

K: Wetin na di mistek dɛm we yu fɔ avɔyd we yu de instɔl ɛkstirian domɔt?

A: Di mistek dɛn we dɛn kin mek na we dɛn nɔ de mɛzhɔ di rayt we, we dɛn nɔ de mek shɔ se di lɛvul ɛn di plam opin, ɛn we dɛn nɔ de mek di wɛda nɔ fayn.

K: Aw a go no if mi domɔt we de na do sidɔm fayn ɛn i nɔ mek di wɛda?

A: Chek fɔ ivin kɔntakt bitwin di domɔt ɛn di wɛdastrip, ɛn luk fɔ gap ɔ draft. I impɔtant fɔ mek dɛn kɔl ɛn sidɔm fayn fayn wan.

K: Wetin a fɔ du if mi domɔt frem nɔ skwea ɔ plumb?

A: If di freym nɔ skwea ɔ plumb, mek ajɔstmɛnt dɛn we nid fɔ yuz shim ɛn wan lɛvul bifo yu go bifo wit di instɔleshɔn.