aw fɔ instɔl domɔt we de na do

Yu rɛdi fɔ mek yu os luk nyu? If yu du wan instɔleshɔn fɔ di domɔt na do, dat kin rili mek yu os luk fayn. I kin ɛp yu bak fɔ sev mɔni pan di kɔst fɔ ɛnaji. Apat frɔm dat, nyu domɔt we de na do kin ivin mek yu os gɛt mɔ valyu if yu disayd fɔ sɛl am. Luk dɛn nɔmba dɛn ya:

If yu riples yu frɔnt domɔt wit stɛl wan we yu de instɔl yu domɔt na do, bɔku tɛm yu kin gɛt bak ɔl di mɔni we yu dɔn put ɛn ɔda tin dɛn. Stilin domɔt dɛn kin mek yu os sef bak ɛn i kin izi fɔ mek yu kia fɔ am. Doa dɛn we nɔ de yuz bɔku ɛnaji kin mek yu os fayn, ɛn dis kin mek yu nɔ pe bɔku ɛnaji ɛn bɛnifit di planɛt. Yu nɔ nid fɔ bi ɛkspɛkt fɔ takɛl dis prɔjek. Jɔs gɛda di rayt tul dɛn ɛn fala sɔm simpul tin dɛn. Yu kin dɔn dis ɛkstirian domɔt instɔleshɔn fɔ yusɛf!

• Doa dɛn we nɔ de yuz bɔku ɛnaji kin ɛp fɔ mek yu os nɔ wam, we min se yu nɔ de yuz bɔku ɔt ɛn kol.

• If yu yuz smɔl ɛnaji, i bɛtɛ fɔ di wɔl.

• We yu ɔpgrɛd yu domɔt, dat kin ɛp fɔ fɛt di klaymat chenj.

Ki tin dɛn we dɛn kin tek fɔ tek

• If yu put nyu domɔt na do, dat kin mek yu os luk fayn ɛn i kin mek yu gɛt mɔ valyu. I kin ɛp yu bak fɔ sev mɔni pan ɛnaji bil. Luk ɔltɛm na yu domɔt fɔ si if ɛnitin dɔn pwɛl jɔs afta i rich. Mek shɔ se na di rayt saiz ɛn tayp fɔ stɔp prɔblɛm dɛn we dia. Gɛt impɔtant tin dɛn lɛk tep mɛzhɔ, drɔ, ɛn lɛvɛl bifo yu bigin. Dis go ɛp yu fɔ instɔl di domɔt izi wan. I rili impɔtant fɔ... wedaproof di domɔt opin . Dis kin mek wata ɛn briz nɔ go insay ɛn i kin mek yu nɔ ebul fɔ fiks tin dɛn leta. Tek kia ɔf yu domɔt bay we yu de peint ɔ stɛyn am bɔku tɛm. Dis kin ɛp yu domɔt fɔ lɔng tɛm ɛn i kin mek i luk fayn.

Prɛparashɔn fɔ Instɔl di Doa na do

Chek ɛn Risiv di Doa

We yu domɔt kam, chɛk am wantɛm wantɛm. Opin di bɔks fayn fayn wan ɛn luk fɔ ɛnitin we dɔn pwɛl. Mek shɔ se di stayl, di sayz, ɛn di say we yu de swing kɔrɛkt. If yu skip dis, yu kin gɛt di rɔng domɔt. Yu kin mis bak wan prɔblɛm we go ambɔg yu warranty. Fɔ pik di rɔng saiz ɔ swing dairekshɔn na kɔmɔn mistek. Dɛn mistek ya kin mek gap ɔ nɔ kin sidɔm fayn. Dɛn kin ivin mek yu domɔt nɔ sef.

Tip: Ɔltɛm chɛk yu domɔt insay sɔm dez afta yu gɛt am. Dis kin ɛp yu fɔ fɛn prɔblɛm kwik kwik wan ɛn i kin mek yu warranty sef.

Gayd Tul ɛn Matirial dɛn

Yu nɔ nid spɛshal tul dɛn fɔ instɔl domɔt. Di rayt tul dɛn kin mek di wok izi. Na dis list de fɔ ɛp yu fɔ rɛdi:

Impɔtant Tul ɛn Matirial dɛn:

• Tep fɔ mɛzhɔ

• Dril ɔ skru gɔn

• Pry bar

• Level (2-fut ɛn 4-fut) .

• Hama we dɛn kɔl

• Yutiliti naif

• Gɔn fɔ kɔl ɛn silikon kɔl

• Wud shims

• Trim wud we dɛn dɔn priym bifo tɛm

• Sefty glas dɛn

Tul ɛn Matirial dɛn we yu kin pik:

• Tul we de oscillating ɔ Sawzall

• Nail gun we dɛn kin yuz

• Vinyl ɔ natura wud trim

• Step lada we yu de yuz

• Peinta in tep

• Insuleshɔn we dɛn mek wit fayv glas

Pik matirial dɛn we go wok fɔ yu wɛda ɛn stayl. Fayba glas domɔt dɛn kin las fɔ lɔng tɛm ɛn dɛn nɔ nid fɔ kia fɔ dɛn. Stilin domɔt dɛn strɔng bɔt dɛn nid mɔ wok. Wud domɔt dɛn kin luk fayn bɔt dɛn nid bɔku kia.

Rivyu di Waranti ɛn Instrɔkshɔn dɛn

Tek sɔm tɛm fɔ rid di instrɔkshɔn dɛn ɛn di warranty. Ɛni domɔt difrɛn smɔl. If yu no di rayt we fɔ put domɔt, yu nɔ go mek mistek. Sɔm mistek dɛn na bad freym prep ɔ skip weatherproofing. We yu rɔsh, dat kin mek yu gɛt prɔblɛm bak. We yu rid di instrɔkshɔn dɛn, dat go ɛp yu fɔ no ɛni wan pan di tin dɛn we yu fɔ du. I de kip yu warranty bak sef. If yu gɛt kwɛstyɔn, luk di gayd ɔ aks fɔ ɛp bifo yu bigin.

Notis: We yu no yu warranty, dat kin ɛp yu leta if yu nid fɔ ripɛnt ɔ sɔpɔt.

Pripia di Opin fɔ Ɛkstirian Doa

Rimov di Ol Doa Yunit

Start bay we yu pul di domɔt hadwɔd ɛn trim we dɔn de. Yu want fɔ tek tɛm pul di ol domɔt yunit so dat yu nɔ go pwɛl di freym we de rawnd am. Yuz skru drayva ɔ drɔl fɔ pul di hinj skru dɛn. Wan pry bar de ɛp yu fɔ lus di jamb ɛn trim. Wear sef glas fɔ protɛkt yu yay frɔm dɔti we de flay. Swip ɛni dɔst ɔ nel we lɛf. Dis step de gi yu wan klin slet fɔ yu nyu domɔt.

Tip: Aks yu padi fɔ ɛp fɔ ol di domɔt stedi we yu de wok. Doa dɛn kin ebi ɛn i nɔ kin izi fɔ ol yu wan.

Inspek ɛn Mɛzhɔ di Raf Opin

Naw, inspɛkt di rough opening . Yu nid fɔ mek shɔ se di ples rɛdi fɔ yu nyu domɔt. Na dis na aw yu de chɛk di mɛzhɔmɛnt dɛn:

1. Mekɔp di ayt fɔ di rɔf opin na ɔl tu di say dɛn.

2. Mekɔp di waid na di ɔp, midul, ɛn dɔŋ.

3. Di opin fɔ 1/2 to 3/4 inch wayd ɛn lɔng pas yu domɔt yunit. Dis ekstra spes de mek yu ajɔst ɛn shim di domɔt fɔ mek i fit fayn fayn wan.

If yu si ɛnitin we dɔn rɔtin ɔ we dɔn pwɛl, fiks am bifo yu go bifo. If yu opin fayn fayn wan, dat kin ɛp yu domɔt fɔ las fɔ lɔng tɛm.

Mek shɔ se Lɛvɛl ɛn Skwea Framing

Yu want mek yu domɔt opin ɛn lɔk fayn fayn wan. Yuz wan lɛvul fɔ chɛk if di sayd dɛn plumb (stret ɔp ɛn dɔŋ). Put di lɛvɛl na di ɔp ɛn dɔŋ fɔ mek shɔ se dɛn flat. Mekɔp ɔl tu di dayagɔnal dɛn na di opin. If di nɔmba dɛn mach, yu opin na skwea. If nɔto so, ajɔst di freym te ɔltin layn.

Notis: Wan skwea ɛn lɛvul opin de mek instɔleshɔn izi ɛn ɛp yu domɔt sial tayt.

Aplay Weta Barɛri ɛn Flashin

Wedapruf yu opin bifo yu instɔl di nyu domɔt. Dis step de kip wata ɛn drɛf kɔmɔt. Di rayt barɛri dipen pan yu klaymat:

Put wan barɛri we nɔ de mek di wɛda go rawnd di say we dɛn opin. Ad tep we de flash ɔ sil pan dɔŋ fɔ mek wata go fa. Ovalap di flashin frɔm di bɔt ɔp. Dis we ya de ɛp yu fɔ mek di domɔt nɔ gɛt wɛda ɛn protɛkt yu os frɔm lik.

Pro Tip: Wedaproofing naw de sev yu frɔm di kɔst fɔ ripɛnt leta. Ɔltɛm, chɛk yu wok tu tɛm bifo yu go bifo.

Aw fɔ Instɔl Ɛkstirian Doa dɛn: Step-by-Step

Instɔl di Sill Pan

Yu want yu nyu domɔt we de na do fɔ las fɔ lɔng lɔng tɛm. Di bɛst we fɔ mek wata nɔ go insay na fɔ put di sil pan bifo yu sɛt di domɔt na in ples. Dis step de protɛkt yu os frɔm lik ɛn rɔtin. Na dis na aw fɔ instɔl di sil pan fɔ mek i nɔ gɛt wata:

1. Dray-fit di sill pan na yu opin. Mek shɔ se i kɔba di wan ol waid fɔ di rɔf opin.

2. Trim di sill pan if nid de. Yuz mɛtal snip ɔ hacksaw fɔ klin ed.

3. Put tri bidz dɛn we gɛt ay kwaliti kɔlk along di sabflɔ usay di sil pan go sidɔm.

4. Pres di sill pan insay di kol. Push dɔŋ fayn fayn wan so dat i go sial tayt.

5. If yu sil pan gɛt bɔku bɔku pat dɛn, yuz PVC simen fɔ bon di jɔyn dɛn. Hol dɛn togɛda fɔ sɔm sɛkɔn dɛn.

6. Rɔn wan bidz we gɛt kɔlk along di sim dɛn ɛn di fɔnt lip na di sil pan fɔ mek yu gɛt ɛkstra protɛkshɔn.

Tip: Nɔ ɛva skip dis step. Sil pan we dɛn dɔn instɔl fayn na yu bɛst fɔ protɛkt yusɛf frɔm wata we de pwɛl we yu de instɔl di domɔt na do.

Put ɛn Sikyur di Doa Yunit

Naw yu dɔn rɛdi fɔ sɛt di domɔt na di opin. Dɛn kɔl dis pat fɔ sɛt ɛn fast di yunit. Na dis yu de du:

• Put di bɔt ɔf di domɔt yunit na di sɛntrɔm pan di sil pan.

• Tilt di domɔt ɔp te i tinap stret na di say we dɛn opin.

• Chek se di hinj sayd na plumb yuz 4-fut levul.

• Pri-drill ol dɛn na ɛni hinj ples. Dis kin ɛp fɔ mek di wud nɔ split.

• Drayv 2.5-inch skru dɛn tru di jamb ɛn insay di wɔl stɔd dɛn na ɛni hinj. Nɔ tayt pasmak yet.

If yu de wok pan dabl doa instɔleshɔn, sikyuɔr di pasiv ɔ fiks sayd fɔs. Dis kin mek ɔltin layn fɔ di aktif domɔt.

Tips fɔ instɔl di domɔt: Ɔltɛm, sikyurɛt di hinj sayd fɔs. Dis kin mek di domɔt nɔ chenj as yu de wok.

Shim ɛn Fasten di Jamb

Shims de ɛp yu fɔ gɛt pafɛkt fit. Dɛn kin ful-ɔp smɔl smɔl say dɛn bitwin di domɔt frem ɛn di wɔl. Na dis na aw fɔ shim ɛn fast di jamb:

• We yu lɔk di domɔt, slayv shim dɛn biɛn ɛni hinj bitwin di jamb ɛn di wɔl.

• Chek fɔ plumb ɛn stret wit yu lɛvɛl.

• Tayt di skru dɛn na di midul hinj fɔs, dɔn di ɔp, dɔn di bɔt.

• Ad shims na di tap pan di jamb ɛn ɔp di lɔk eria fɔ ɛkstra sɔpɔt.

• Dril payɔt ol ɛn drayv skru dɛn tru di jamb na ɛni shim ples.

Dis step de mek yu domɔt we de na do skwea ɛn strɔng. If yu si ɛni gap, ad mɔ shim te di freym fil fayn.

Adjust ɛn Sikyuɔr Lɔk Sayd

Yu want mek yu domɔt lɔk tayt ɛn mek i nɔ gɛt wan prɔblɛm. Na dis na aw fɔ instɔl ɛkstirian domɔt dɛn wit strɔng lɔk sayd:

• Mekɔp di gap bitwin di domɔt ɛn di jamb. I fɔ ivin kɔmɔt ɔp to dɔŋ.

• Put shims biɛn di lɔk sayd fɔ di jamb. Dis kin mek di wɛda strip kin kɔntakt di domɔt.

• Instɔl jamb skru dɛn along di lɔk sayd. Tayt dɛn afta yu dɔn chɛk if dɛn fit.

• Yuz wan strayk plet we yu kin ajɔst. Layn am wit di lɔk ɛn mek i sikrit afta yu dɔn ajɔst.

• Fɔ mek yu gɛt mɔ sikyɔriti, yuz ebi ebi strayk plet ɛn dɛdbɔlt we gɛt 1 inch trowe bolt.

• Sikyu di strayk plet ɛn hinj wit 3-inch skru. Dis kin ankɔ dɛn dip dip wan insay di freym.

Notis: Dɛn step ya de ɛp yu fɔ mek di lɔksɛt jamb sikrit ɛn protɛkt yu os fɔ mek dɛn nɔ fos yu fɔ kam insay.

Chek aw di doa de wok ɛn aw i de alaynɛd

Yu want yu nyu domɔt we de na do fɔ opin ɛn lɔk fayn fayn wan. Afta yu dɔn instɔl am, chɛk aw di domɔt de wok ɛn aw i de alaynɛd:

1. Opin ɛn lɔk di domɔt bɔku tɛm. I fɔ muv izi wan we i nɔ fɔ rɔb ɔ stik.

2. Adjɔst shims fɔ gɛt ivin gap rawnd di domɔt.

3. Yuz wan lɛvul fɔ chɛk if di domɔt sidɔm stret na di freym.

4. Kɔnfɛm se di hinj dɛn layn ɛn di lɔk de wok fayn fayn wan.

5. Chek ɔl di mɛzhɔmɛnt ɛn kliarens dɛn tu tɛm bifo yu dɔn.

Na dis na wan kwik tebul fɔ ɛp yu fɔ si ɛn fiks kɔmɔn alaynɛshɔn prɔblɛm dɛn:

If yu notis ɛni prɔblɛm, fiks am naw. Adrɛs misalignment ali de mek shɔ se yu ɛkstirian domɔt instɔleshɔn de las fɔ ia.

Yu jɔs dɔn lan aw fɔ du am instɔl ɛkstirian domɔt dɛn stɛp bay stɛp. Yu dɔn si bak aw fɔ chɛk aw di domɔt de wok ɛn mek shɔ se ɔltin layn. Wit dis step dem, yu kin inshol eksterior doa lek pro.

Finish ɛn Wɛdapruf di Ɛkstirian Doa

Instɔl Hadwɔd ɛn Trim

Yu gɛt yu domɔt yunit insay in ples. Naw, na tɛm fɔ ad di finishing tɔch dɛn. Start bay we yu instɔl di lɔksɛt, dɛdbɔlt, ɛn ɛni handel. Yuz di instrɔkshɔn dɛn we di wan we mek am gi fɔ mek i fit fayn fayn wan. Fɔ say dɛn we trafik bɔku ɔ we di wɛda kin tranga, pik hadwɔd we dɛn mek wit silikon, vaynil, ɔ brɔsh matirial. Dɛn opshɔn ya tinap fɔ mɔstɔ ɛn yus ɛvride. If yu want ɛkstra sikyɔriti, luk fɔ ɛkzit divays dɛn lɛk di 98/99 Series ɔ 33A/35A Series. Dɛn tin ya nɔ de mek wata pas ɛn dɛn bil dɛn fɔ tranga kɔndishɔn.

Neks, ataya di trim we de na do. Vinyl ɛn pri-primed wud trim dɛn kin wok fayn fɔ bɔku os dɛn. Dɛn nɔ de si di wata ɛn dɛn kin luk fayn. Mek shɔ se di trim sidɔm tayt agens di domɔt yunit fɔ mek di wata nɔ kam insay.

Insulate Arawnd di Frɛm

Insuleshɔn na di ki fɔ kɔmfɔt ɛn di we aw dɛn de sev ɛnaji . Yu want fɔ ful-ɔp ɛni gap bitwin di domɔt yunit ɛn di wɔl. Fɔ mek fom bɔku kin wok fayn fɔ dis wok. I de ful-ɔp di say dɛn we nɔ de ɔltɛm ɛn i de mek di briz nɔ lik. Na dis na fɔ luk kwik kwik wan pan di tin dɛn we yu go ebul fɔ du:

Bifo yu put fom, chɛk if di domɔt yunit de swing fri wan ɛn sidɔm lɛvul. Yuz jɔs inof fom fɔ mek wan strɔng barɛri. Tumɔs kin bow di freym.

Tip: Ɔltɛm mek di fom wɛl bifo yu go to di nɛks step.

Caulk ɛn Sil Ɛkstirian Doa

We yu sial ɛn mek yu domɔt yunit nɔ gɛt wɛda, dat de mek wata ɛn dray we nɔ de kɔmɔt na yu domɔt. Yuz a ay kwaliti kol lεk silikon כ polyurethane. Dɛn prɔdak ya kin las fɔ lɔng lɔng tɛm ɛn dɛn kin chenj chenj. Fɔ di bɛst rizɔlt, tray BoPin MS-240 Ɔl-Wɛda Windo & Doa Silan ɔ Big Stretch. Dɛn tu kin peint ɛn dɛn kin handle muvmɛnt fayn fayn wan.

• Rɔn wan bidz we dɛn mek wit kɔl usay di trim mit di wɔl ɛn di sil.

• Sial ɔl di jɔyn ɛn kɔna dɛn.

• Waip ɛni ɛkstra kɔl fɔ mek yu luk klin.

Gud sil de protɛkt yu domɔt yunit frɔm lik ɛn damej.

Pent ɔ Stayn fɔ Protɛkshɔn

Di las tin we yu fɔ du na fɔ peint ɔ stɛyn yu domɔt yunit. Dis layt de protɛkt am frɔm san, ren, ɛn briz. We yu peint ɔ sidɔm, dat kin mek yu nɔ gɛt UV rayt ɛn mɔstɔ. Steyn de ɛp fɔ mek di wud nɔ rɔtin ɛn i de mek wud luk fresh. Na dis na wetin yu de gɛt:

Yuz wan ay kwaliti, UV-blɔk tɔpkot. Klin yu domɔt yunit wit mild sop ɛn wan saf klos bifo yu bigin. Put sila ɔ tɔpkot ɛvri ia fɔ mek yu domɔt yunit luk nyu. Nɔ it tin dɛn we nɔ dia we nɔ de protɛkt pɔsin frɔm di wɛda.

We yu de kia fɔ yu domɔt ɔltɛm, dat kin ɛp fɔ las fɔ lɔng lɔng tɛm ɛn i kin mek yu os luk fayn.

Yu dɔn no naw aw fɔ put domɔt we de na do frɔm di biginin te to di ɛnd. We yu rɛdi ɛn ad tin dɛn we de mek yu nɔ gɛt wɛda, dat kin ɛp fɔ mek yu os sef ɛn i kin mek yu nɔ gɛt bɔku ɛnaji. Chek ɔltɛm se di domɔt layn rayt ɛn sidɔm fayn so dat i go fit tayt. If yu kɔnfyus, aks pɔsin we sabi du di wok fɔ ɛp yu. Dɛn no aw fɔ du tin dɛn we at fɔ du, fala di lɔ dɛn we de fɔ bil, ɛn mek yu fil fayn bɔt di wok. Fɔ mek yu domɔt las, fala di warranty ɛn finishing tips frɔm di wan we mek am:

• Mek yu domɔt las fɔ lɔng tɛm

• Min se yu nɔ nid fɔ fiks am so

• Kip ɔut bad wɛda ɛn wata

Go sloslo ɛn ɛnjɔy yusɛf wit yu nyu domɔt!

FAQ we dɛn kin aks

Aw lɔng i kin tek fɔ put domɔt we de na do?

Bɔku pipul dɛn kin dɔn insay 4 to 8 awa. If yu gɛt ɛp, yu kin dɔn kwik kwik wan. Tek yu tɛm fɔ gɛt di bɛst rizɔlt.

A kin instɔl domɔt we de na do mi wan?

Yu kin du am, bɔt we yu gɛt padi, dat kin mek am izi. Doa dɛn ebi ɛn i at fɔ ol dɛn wan. Aks fɔ ɛp if yu ebul.

Wetin a go du if mi domɔt nɔ fit di say we dɛn opin?

Chek yu mɛzhɔmɛnt dɛn fɔs. If di say we dɛn opin tu smɔl, yu go nid fɔ trim di freym. If i tu big, yuz shim fɔ ful-ɔp di say dɛn we nɔ de.

A nid fɔ peint ɔ stɛyn mi nyu domɔt wantɛm wantɛm?

Yɛs! Peint ɔ stɛyn yu domɔt insay 60 dez. Dis de protɛkt am frɔm wɛda ɛn i de mek yu warranty kɔntinyu fɔ wok.