US project hrang hrang, wide-span glazing leh thawhrimna tel lo indoor-outdoor flow mamawh tan chuan DERCHI atanga aluminum bifold door United States solution chuan tailored performance a pe a ni. Kan thermally broken aluminum bifold door-te hian multi-pane insulating glass leh weather-rated seal hmangin boruak hrang hrangah—ni chhuahna patio aṭanga tuipui kama villa thlengin.
- Multi-series lineup: 78, 80, leh 93 series hian budget ngaihtuah atanga high-performance tier thlengin a huam a ni.
- Glass customization: Double, triple, Low‐E, laminated, emaw tinted glass, argon fills leh optional integrated blinds hmanga siam a ni.
- Hardware test tawh: KERSSENBERG leh CMECH te hian a handle, hinge, leh lock te chu a thawk tha thei a, a him thei bawk.
Product Details te chu a hnuaia mi ang hian a ni
Aluminium bifold door United States hmanna atana engineer a ni a, DERCHI bifold door hian heat transfer leh condensation tihtlem nan thermally broken aluminum frame an hmang a ni. Panel-te chu a sir khatah emaw, a sir lehlamah emaw a inzawm khawm a, a hawnna zawng zawng chu a tifai vek a ni—sliding door-a hmun chanve chu a inkharkhip reng ang lo takin. He full access hi patio, restaurant terrace, leh hotel event space te nen a inmil a, thli leh tui chak tak laka invenna a vawng reng bawk.
Aluminum folding door United States project-te tan chuan sill thlan a pawimawh: fully weathered, low‐level, emaw water‐resistant tracks te chu exposure level hrang hrang nen an inmil a ni. 78, 80, leh 93 series huam chhungah hian multi‐layer tempered insulating glass option hrang hrangah Low‐E coatings, laminated safety glass, leh argon gas te a awm a ni. 80 series hian patio bifold kawngkhar seamless glass‐curtain effect mamawh tan 90‐degree corner folding design pawh a pe a, Jiangyin Haida EPDM rubber strips hian thliin ruah a sur leh boruak a luh loh nan a veng bawk.
Product Features te pawh a awm
Thermal break efficiency: Thermally broken aluminum profile plus insulating glass te hian U‐factors leh condensation risk a ti hniam a, hei hian climate zone hrang hrang tana US energy code zawm turin a pui a ni.
Glass flexibility: Project hrang hranga solar heat gain, visible light, leh acoustic comfort project enkawl turin double, triple, Low‐E, laminated, emaw tinted glass thlang rawh.
Hardware test tawh: KERSSENBERG emaw CMECH handle, hidden hinge, leh multi‐point lock te hian folding mumal tak leh forced‐entry resistance tihchakna a pe a ni.
Multi‐point locking: Meeting stile-a extra locking strike-te chuan thli load hnuaiah panel-te chu a inmil reng a, hmun langsar takah pawn lam bifold kawngkhar zau tak takte tan a pawimawh hle.
Adjustable sills: Drainage, threshold, leh accessibility mamawh phuhruk nan fully weathered, low‐level, emaw water‐resistant sills thlang rawh.
NFRC‐ready data: Series U‐Factor leh SHGC value 93 a awm a; i submittal tih awlsam nan configuration eng pawh atan test report dil theih a ni.
Style hrang hrang siam theih a ni
Glass type: Triple tempered, laminated, Low‐E, reflective, emaw tinted glazing-ah upgrade rawh—SHGC emaw sound ratings bik target-a custom aluminum bifold door atan a tha hle.
Frame finish: Powder coating, anodized wood grain, emaw PVDF chu architectural palette leh coastal durability mamawh nena inmil turin colour palette zau takah dah a ni.
Frame depth: Thli load leh structural back‐up nena inmil tur profile 47mm, 70mm, 75mm, leh 100mm a awm.
Opening direction: Kawngkhar hi a chhung lam emaw pawn lam emaw a fold theih a, hei hi patio layout, floor space, leh egress code a zirin a ni.
Sill design: Thil thlan theihte chu fully weathered, low‐level saddle, leh water‐resistant track te a ni a; i project exposure atan supplier hnenah confirm rawh.
Hardware Accessories te pawh a awm bawk
Handles & lock: KERSSENBERG emaw CMECH emaw hardware multi‐point locking nei; frame rawng hrang hrang nena inmilna finish.
Hidden hinges: Concealed pivot hardware hian sightline thianghlim a vawng reng a, thil kal lai te chu khaw lum atanga a venghim bawk—exterior bifold door USA installation atan a pawimawh hle.
Multi‐point strikes: Extra locking points hian thli tleh laka panel assembly chu a tikhauh a, boruak tightness a ti tha bawk.
Weather seals: Jiangyin Haida EPDM rubber leh integrated bent duckbill seals te hian tui leh boruak luh theihna tur inkharkhip chhunzawm zel a siam a, ruahtui tamna hmun atan a pawimawh hle.
Integrated blinds: Glass cavity chhunga optional 26A magnetic emaw 27A solar‐powered blinds te hian ni êng control theihna a pe a, zero dust exposure a awm bawk.
Parameter bulpui ber berte
Performance Item a ni | Thu hriat tur awmsa | Buyer Notes te pawh a awm |
|---|---|---|
Thermal Insulation hmanga siam a ni | 93 Series U-Factor chu 0.28 a ni a; 78 Series Uw chu 2.0–3.5 W/m2K a ni a; 80 Series Level 7 (Chinese standard) a ni a, a khelh danah pawh a khel tha hle. | Glass pack leh size thlan bik atan NFRC verified U‐Factor dil; 78/80 value te hi US zawm tur chuan conversion a ngai mai thei. |
Thli Pressure Resistance a ni | 93 Series 4.5 KPa a ni a; 78 Series chu 5000 Pa thleng a ni a; 80 Series Level 9 ah a awm a | I building san zawng leh awmna hmun nena inmil leh inmil loh enfiah nan AAMA/WDMA khatah Design Pressure (DP) rating tlukpui dil rawh. |
Tui Tightness a awm | 93 Series 450 Pa a ni a; 78 Series 500–700 Pa-ah a awm a; 80 Series Level 4 ah a awm a | Test standard (eg, ASTM E547) leh rating chu project-a thli tleh vanga ruahtui tlak dan nen a inmil em tih enfiah rawh. |
Air Tightness a awm | 93 Series 1.8 m3/(m·h) a ni a; 80 Series Level 6 ah a awm a | Air infiltration limit hi climate zone hrang hrangah a inang lo va; local energy code mamawhna nena khaikhin chuan tested rate chu nemnghet rawh. |
Sound Insulation a awm bawk | 93 Series 30 dB a ni a; 78 Series Rw 35–40 dB inkar a ni | High-noise area tan chuan STC emaw OITC ratings dil la, acoustic performance tihchangtlun nan laminated glass ngaihtuah rawh. |
Product chungchang chi hrang hrang
Parameter a ni | 78 Series a ni | 80 Series a ni | 93 Series a ni |
|---|---|---|---|
Profile Material a ni | Thermal break aluminium, 1.8 mm a thuk a ni | Aluminium, 2.0 mm a thuk a ni | 6063-T5 aluminium, 2.0 mm a thuk a ni |
Frame zau zawng | 47 / 70 / 75 / 100 mm a ni thei | 80 mm a ni | 93 mm a ni |
Standard Glass hmanga siam a ni | 5 mm + 27A + 5 mm double tempered a ni | 5 + 20A + 5 a ni | 5 mm + 27A + 5 mm chu argon hmangin double tempered a ni |
Panel zau zawng | 500–800 mm inkar a ni | 500–850 mm inkar a ni | 500–850 mm inkar a ni |
Panel San zawng a awm | 1000–2800 mm inkar a ni | 1000–3000 mm inkar a ni | 1000–3800 mm inkar a ni |
Hawnna tur Direction | Chhung lam emaw pawn lam emaw | Chhung lam leh pawn lam | Chhung lam leh pawn lam |
Thermal Performance hmanga hnathawh dan | Uw 2.0–3.5 W/m2K a ni | Level 7 – U‐Factor dil rawh | U‐Factor 0.28 (I‐P) a ni. |
Thli Pressure Resistance a ni | 5000 thleng Pa | Level 9 ah a awm | 4.5 KPa a ni |
Tui Tightness a awm | 500–700 inkar a ni | Level 4 ah a awm | 450 Pa |
Air Tightness a awm | Thu hriat duh chuan dil theih a ni | Level 6 ah a awm | 1.8 m3/(m·h) a ni. |
Sound Insulation a awm bawk | Rw 35–40 dB a ni | Level 5 ah a awm | 30 dB a ni |
Surface Finish a ni | Powder coating, thing chi anodized, PVDF hmanga siam a ni | Powder coating, thing chi anodized, PVDF hmanga siam a ni | Powder coating, thing chi anodized, PVDF hmanga siam a ni |
Hardware hmanga siam a ni | KERSSENBERG kutkawr, hinge thup, lock | CMECH aluminium alloy handle, hinge, lock point bik te a awm bawk | Kerssemberg handle, hinge, locking point bik a awm bawk |
A thatna te
Thermal compliance: Series zawng zawnga thermally broken aluminum frame te hian condensation resistance leh energy save nan IECC emaw ASHRAE emaw mamawh phuhrukna kawngah a pui thin.
Project-level customization: Glass make‐up leh frame finish atanga sill height leh opening direction thlengin aluminum bifold door tin hi i specification dik tak angin siam vek a ni.
Components chhe thei lo: KERSSENBERG, CMECH atanga hardware finfiah tawh, leh Jiangyin Haida atanga sealing strip te hian pawn lam boruak khirh takah hun rei tak chhunga rintlakna a tichiang a ni.
Technical submittal support: NFRC‐ready test data, certification documentation, leh performance specs te hian architect leh dealer te chu US building approval dil turin rintlak takin an thehlut thei a ni.
Manufacturing capacity: 70,000‐square‐meter production base neiin khawvel puma dealer 700+ rawngbawlna experience neiin DERCHI hian bulk project, ODM/OEM, leh supply mumal tak a thlawp a ni.
A hman dan tur Scenario hrang hrang
Apartment: Folding panels hian floor area tichhe lovin balcony te te a hawng a, khawpui chhunga compact taka awm theihna turin ni êng leh boruak thianghlim a rawn keng tel a ni.
Home Office: Sound‐insulated aluminum folding door hian hnathawhna hmun chu huan nen a thlunzawm a, focus chu bright, open feel nen a balance a ni.
Hotel: Event room leh restaurant-te chu terrace-ah an zau a, panel set dah khawm a awm a, khualzinte tan floor space hman theih a tipung a ni.
Office Building: Breakout area-ah chuan optional 90‐degree corner folding a awm a, corner post te chu paih chhuakin, collaborative zone atan pawn lam thlir theihna a tam thei ang ber a ni.
Pawn lam: Patio leh inchung atan chuan tui laka invenna sills leh marine‐grade finish te a awm thei a; buyers te chuan thli load leh water tightness ratings te chu exposure bik atan an confirm tur a ni.
Residential Building: Multi‐unit development hrang hrangah standardize a, size leh finish repeatable neiin, unit tinte energy code path leh balcony orientation te ngaihtuah chungin.
Pawn lam: Pawn lam storefront installation-ah hian paint system uluk tak leh seal spec a ngai a; configuration thlan tawh certification-te chuan building envelope mamawh a tlin tih nemnghet rawh.
Villa: Panel san zawng 3.8 m thlenga sei, custom wood‐grain PVDF leh triple glazing hmanga siam chuan luxury interior leh poolside terrace te inkarah inzawmna ropui tak a siam a ni.
FAQ
Aluminium bifold door hi eng nge ni a, engvangin nge United States ram pumah hman a nih?
Aluminium bifold door United States solution chu folding glass wall a ni a, panels chu a sir khatah dahin opening zawng zawng a hawng vek a ni. A thermal efficiency leh custom glazing te hian patio, restaurant, leh tunlai in te tan chuan seamless indoor‐outdoor flow zawngtute tan a lar hle.
Khawiah nge heng kawngkharte hi dah theih ang?
Hmun tlangpuiah chuan residential patio kawngkhar, hotel event space, retail storefront, home office, leh commercial breakout area te a ni. Series leh sill thlan hi chhung lam leh pawn lam boruak langsar tak takah a inmil vek.
Dimension, glass leh frame finish te hi a duh angin a siam theih em?
Awle. Panel zau zawng, a san zawng, glass chi (Low‐E, laminated, tinted), rawng, leh sill san zawng te chu a inthlak theih vek a ni. Project tin atan order angin custom aluminium bifold door siam a ni.
Quote siam nan eng information nge mamawh?
Opening width leh height, preferred series (78, 80, 93), glass specification, panel awm zat, finish color, sill type, project awmna hmun, leh NFRC emaw impact‐rating documentation emaw i mamawh leh mamawh loh te pe rawh.
Dealer leh developer te tan B2B service i pe em?
Ni e, ODM/OEM, bulk project pricing, technical submittal package, leh sales sample te kan thlawp a ni. Kan team hian architect leh procurement leads te nen specification atanga delivery thlengin kan thawk ho thin.
NFRC test report a awm em?
Awle. 93 Series tan chuan U‐Factor leh SHGC data chu file-ah a awm a. 78/80 Series tan chuan testing kan ruahman thei a, i configuration dik tak dilna angin documentation tlukpui kan pe thei bawk.
US buyers te hian order an tih hmain eng nge an confirm tur?
Rough opening dimensions, thli load leh tui luh dan tur local code mamawh te, hurricane emaw impact ratings emaw a ngai em tih te enfiah rawh. Sill details leh structural support te chu a hmain confirm hmasa phawt ang che.
Engtin nge packaging, shipping leh warranty te hi an enkawl?
Kawngkharte chu tuipuiah bungraw phurh chhuahna tur export‐grade plywood crates-ah dah a ni. Lead times, shipping terms, leh warranty details te chu i quotation nen hian a awm a; i thil siam tur warranty document kimchang dil rawh.
