Glass Door Sliding As Room Divider Nafaw ni dɛsɛw: I ka kan ka fɛn o fɛn dɔn

Yala i delila ka taama ka don so dɔ kɔnɔ k’i yɛrɛ ɲininka cogo min na u y’a to u ka yɔrɔ dabɔlen don kosɛbɛ, nka a labɛnna cogo min na? Bi sotigiw bɛ ka laadala kogow fili walasa ka fɛn dɔ sɔrɔ min bɛ se ka wuli ka bɔ a nɔ na. Glasi da so tilayɔrɔw bɛ ka fɛn caman sɛmɛntiya an ka miiri cogo min na kɔnɔna yɔrɔw kan.

Ni i ye so tilayɔrɔ ɲuman sugandi, o bɛ se ka i ka so bolicogo n’a baarakɛcogo kɛ walima k’a tiɲɛ. Mɔgɔ caman bɛ kɛlɛ kɛ walasa ka u ka danbekow ni u ka ɲɛnamaya kɛcogo dafalenw bɛn ɲɔgɔn ma. Sugandili jugu bɛ se ka wari tiɲɛ ani ka don o don dusukasi lase mɔgɔ ma.

Nin post in kɔnɔ, an bɛna sliding glass door room dividers nafa ni dɛsɛ dafalenw sɛgɛsɛgɛ. I bɛna a ye waati min na u bɛ baara kɛ ka ɲɛ, nafa minnu bɛ se ka kɛ i yɛrɛ ye, ani n’u bɛnnen don i ka yɔrɔ kɛrɛnkɛrɛnnenw ni i ka ɲɛnamaya kɛcogo magow ma.

Glass Sliding Door Room Dividers ye mun ye?

Ɲɛfɔli ni hakilina jɔnjɔn

Glasi da so tilayɔrɔw ye kogow ye minnu bɛ se ka lamaga, minnu dilannen don ni galasi panɛriw ye. U bɛ sɔgɔsɔgɔ siraw kan walasa ka yɔrɔw fara ɲɔgɔn kan walima k’u siri ɲɔgɔn na. Aw ye miiri u la i n’a fɔ kogo minnu bɛ se ka ye, minnu bɛ se ka lamaga, aw bɛ se ka minnu bila yɔrɔ bɛɛ.

Laadalata kogow ye fɛnw ye minnu bɛ sigi sen kan kudayi. U bɛ so tila pewu ani ka yeelen bɔli bali. Glass dividers bɛ flexibilité di laadala kogow tɛ se ka bɛn. I bɛ se k’u da mɔgɔw ɲɛ na lajɛw kama walima k’u datugu walasa u ka kɛ mɔgɔ dogolenw ye.

Danfaraba minnu bɛ u ni ɲɔgɔn cɛ:

Glasi sɔgɔlen so tila-tilacogo suguya caman bɛ yen:

• Single-panel systems - Glass panneau belebele kelen bɛ sɛgɛn sira kan

• Panɛli caman sigicogo - Panɛli caman bɛ ɲɔgɔn dalajɛ walima ka u da ɲɔgɔn kan

• Bi-fold configurations - Panɛliw bɛ foli kɛ i n’a fɔ accordéon ni u dabɔra

• Pocket door systems - Panɛriw bɛ tunun pewu kogow kɔnɔ

  
  

Glass Sliding Room Dividers bɛ baara kɛ cogo min na

O maaɲɛ bɛ Kɛ sira ni nɛgɛso siraw fɛ. Olu bɛ galasi panɛriw ɲɛminɛ ka ɲɛ u sira kan. Sitimɛ fanba bɛ baara kɛ ni siraw ye minnu bɛ dulon sanfɛ walima duguma-yɔrɔw la.

Sitimɛ minnu bɛ dulon sanfɛ, olu bɛ pankurunw jɔ siraw kan minnu bɛ sigi sanfɛ. U ka ɲi kosɛbɛ ni i b’a fɛ ka duguma jiginniw kɛ minnu tɛ fɛn tiɲɛ. Jiginni-yɔrɔ-ko-minɛnw bɛ baara Kɛ ni duguma-siraw ye wa u bɛ dakunw jiginni de wajibiya.

Panɛli kelen ni caman ka labɛnw:

Panɛli kelenw bɛ baara kɛ ka ɲɛ da misɛnninw na. U bɛ sɛgɛn ka taa fan kelen fɛ ka u dalajɛ kogo la. Panneau multi-systemes bɛ da belebelebaw ɲɛnabɔ ka ɲɛ. U bɛ se ka foli, ka ɲɔgɔn dalajɛ, walima ka tunun pewu ni u dabɔra.

Surface-Mounted vs Pocket Door sugandiliw:

Da minnu bɛ sigi sanfɛ, olu bɛ sɔgɔsɔgɔ sira yetaw kan kogo sanfɛ. A sigili ka nɔgɔn, wa a musaka man ca. Panɛriw bɛ to ka ye ni u dabɔra.

Poyi daaw bɛ wuli ka don kogo dogolenw kɔnɔ. U bɛ tunun pewu ni u dabɔra, ka kogo yɔrɔ dɔ da min tɛ tigɛ. A sigili bɛ labɛnni ni jɔli baara caman de wajibiya.

Track Materials minnu bɛ sɔrɔ tuma caman na:

• Aluminiyɔmu siraw (u ka nɔgɔn, u tɛ sɔgɔ) .

• Nɛgɛ siraw (baara gɛlɛnw, jagokɛcogo) .

• Inox (finir premium, durability haute) .

Glasi pannew yɛrɛ bɛ baara kɛ ni lakana galasi tempered ye. O bɛ faratiba bali ka kari ni a tiɲɛna. Sisitɛmu dɔw kɔnɔ, fɛɛrɛ dɔw bɛ yen minnu bɛ datugu ni nɔgɔya ye walasa ka baara kɛ ni dususuma ye, ka baara kɛ ni dususuma ye.

Nafa belebele minnu bɛ sɔrɔ ka baara kɛ ni gilasi da sɔgɔlenw ye i n’a fɔ so tilayɔrɔw

Nafa minnu bɛ yɔrɔ lakanani na

Laadalata da minnu bɛ kɛ ni fɛn ye, olu mago bɛ yɔrɔ la min bɛ se ka wuli walasa ka da wuli. U bɛ duguma yɔrɔ nafama dun i bɛ se ka min kɛ minɛnw walima taama kama. Glasi da minnu bɛ wuli, olu bɛ o gɛlɛya in ban pewu.

U bɛ panpan siraw kan sanni u ka wuli ka don so kɔnɔ. O b’a to u dafalen don yɔrɔ sirilenw ni sow kɔnɔ minnu ka surun. Aw bɛ se ka minɛnw bila u kɛrɛfɛ yɛrɛ k’a sɔrɔ aw ma u baara bali.

Yɔrɔ sangali: Da

So misɛnninw bɛ nafa caman sɔrɔ o dilancogo la min bɛ yɔrɔ tiɲɛ. Senna-tɛgɛrɛ kelen-kelen bɛɛ nafa ka bon n’i bɛ baara kɛ yɔrɔw la minnu ka surun. Da minnu bɛ wuli, olu b’a to i bɛ se ka i ka duguma yɔrɔ caya min bɛ se ka baara kɛ ni u ye.

U ye tulonkɛ-fɛn caman Changeurs ye studio apartments ni so misɛnninw na. Aw bɛ se ka zone danfaralenw da k’a sɔrɔ aw ma yɔrɔ nafama saraka walasa ka manɛw kɛ.

Yeelen bɔli nafama min bɛ bonya

Yeelen dabɔlen bɛ yɔrɔ o yɔrɔ Yɛlɛma ka Kɛ fɛn kɛrɛnkɛrɛnnen ye. Glasi da minnu bɛ wuli, olu bɛ kɛ i n’a fɔ siraba yeelenmaw i ka so bɛɛ kɔnɔ. U bɛ tile yeelen ta ka bɔ so jɛlenw na ka taa kɔnɔna yɔrɔ dibimanw na.

So fanba yeelen tɛ bɛn. So minnu ɲɛsinnen bɛ saheli ma, olu bɛ yeelen tɔni caman sɔrɔ k’a sɔrɔ yɔrɔ minnu ɲɛsinnen bɛ worodugu ma, olu bɛ to ka fiyen. Glass tila-tilalanw bɛ o gɛlɛya ɲɛnabɔ ka ɲɛ.

Nafa minnu bɛ yeelen bɔli la:

• So kɔnɔna minnu bɛ yeelen bɔ, olu bɛ dɔ bɔ kuran musakaw la

• Yeelen dabɔlen bɛ dusukunnataw ni baarakɛcogo ɲɛ

• Sow bɛ kɛ i n’a fɔ u ka bon ani u bɛ mɔgɔ wele ka taa a fɛ

• Fɛnɲɛnɛmaw bɛ se ka ɲɛtaa sɔrɔ yɔrɔw la minnu tun bɛ dibi la fɔlɔ

Miiri k’a filɛ i ka dumunikɛyɔrɔ bɛ sɔgɔmada tile sɔrɔ ka bɔ tilebɔyɔrɔ dɔ la min bɛ i kɛrɛfɛ. Glasi tilalan b’a to o yeelen sanuman ka fa i ka sɔgɔmada dumunikɛyɔrɔ la. Sufɛ ɲɛnajɛ bɛ kɛ kabako ye ni tilebin yeelen bɛ tɛmɛ yɔrɔ caman fɛ minnu bɛ ɲɔgɔn kan.

U nafa ka bon kɛrɛnkɛrɛnnenya la dugujukɔrɔyɔrɔw ni so kɔnɔna na. A ka c’a la, o yɔrɔw bɛ i n’a fɔ kuluba ni yeelenbɔyɔrɔ dafalen tɛ yen. Glass tilayɔrɔw bɛ se k’u sɛmɛntiya ka kɛ yɔrɔw ye minnu bɛ yeelen bɔ, minnu bɛ mɔgɔ bisimila.

Yɔrɔ minnu bɛ se ka sɛgɛsɛgɛ ani minnu bɛ se ka labɛn

Aw magow bɛ Changé waati tɛmɛnen kɔfɛ. Denmisɛnw bɛ bonya, baara cogoyaw bɛ wuli, ani ɲɛnamaya kɛcogo minnu bɛ bila jɔyɔrɔ fɔlɔ la, olu bɛ wuli. Glasi da minnu bɛ wuli, olu bɛ u yɛrɛ dege o fɛn caman Changements (Yɛlɛma) la k’a sɔrɔ u ma cɛsiri kɛ.

U da wuli pewu denbaya ka lajɛbaw kama walima ɲɛnajɛbaw kama. U datugu tuma min na aw mago bɛ sinsinnan na ni dususuma ye walima ni aw mago bɛ aw yɛrɛ la. A bɛ iko so caman bɛ yɔrɔ kelen na.

Labɛnni misaliw:

• Sɔgɔma: U bɛ da wuli denbaya ka sɔgɔmada dumuni kɛ ɲɔgɔn fɛ

• Tilegan fɛ: A bɛ datugu denmisɛnw ka sunɔgɔ waati kama

• Sufɛ: U bɛ da wuli dunanw ɲɛnajɛ kama

• Dɔgɔkun laban: Aw ye aw labɛn kokura baara suguya wɛrɛw kama

Bonus so bɛ kɛ fɛn caman ye cogo kabakoma na. U b’u sɛmɛntiya ka bɔ so birow la ka taa tulonkɛyɔrɔw la ka taa dunanw ka suturayɔrɔw la. Glass tila-tilalanw b’a to fɛn caman tigɛli kelen-kelen bɛɛ bɛ kɛ i n’a fɔ a kɛra ni laɲini ye ani ko a dafalen don.

U dafalen don denbayaw kama minnu bɛ ka bonya. Aw bɛ a daminɛ ni tulonkɛyɔrɔ dafalen ye denmisɛnninw ye. Kɔfɛ, aw k’a tila ka kɛ kalan kɛyɔrɔ danfaralenw ye denmisɛn kɔrɔbaw kama. So kelen bɛ baara caman kɛ ɲɛnamaya taabolo danfaralenw bɛɛ kɔnɔ.

So taabolo ni ɲɔgɔn cɛ jɛɲɔgɔnya ɲɛnabɔli

So bolicogo ɲuman bɛ don o don ɲɛnamaya kɛ cogo nɔgɔman na ani ka diya. Glasi da minnu bɛ wuli, olu bɛ sira dabɔlenw dilan yɔrɔw ni ɲɔgɔn cɛ minnu bɛ ɲɔgɔn kan. U bɛ sirako ɲɛminɛni ɲɛminɛ k’a sɔrɔ u bɛ jɛɲɔgɔnya yelenw mara.

U bɛ da buteli gɛlɛnw bɔ yen minnu bɛ sɔrɔ laadala labɛnw na. Mɔgɔw ​​bɛ se ka taama hɔrɔnya la yɔrɔw ni ɲɔgɔn cɛ k’a sɔrɔ u ma a ye ko u ka surun walima ko u dan ye.

Flow Fɛɛrɛw:

• Lamaga nɔgɔya sɔgɔmada minnu na baara ka ca

• Denmisɛnw kɔlɔsili ka ɲɛ so kɔnɔ

• Seamless entertaining ni so kɔnɔ yɔrɔw cɛ

• Dɔgɔya bɛ ɲɔgɔn gosi yɔrɔw la, mɔgɔw bɛ taa yɔrɔ minnu na kosɛbɛ

Jɛɲɔgɔnya yelen bɛ denbayaw to ɲɔgɔn na hali ni u farala ɲɔgɔn kan. Bangebagaw bɛ se ka denmisɛnw kɔlɔsi k’u to baara la yɔrɔw la minnu bɛ u kɛrɛfɛ. Glass bɛ yeli siraw mara ka sɔrɔ a bɛ danfara baarakɛcogo di.

Ɲɛnajɛ bɛ kɛ cɛsiri tɛ min na ni yɔrɔw bɛ woyo ɲɔgɔn fɛ u yɛrɛ la. Dunanw bɛ se ka taa yɔrɔw ni ɲɔgɔn cɛ k’a sɔrɔ u ma a ye ko u datugulen don walima ko u tununna.

Modern Esthétique Appel

Glasi da minnu bɛ wuli, olu bɛ yɔrɔ o yɔrɔ kura ye o yɔrɔnin bɛɛ. U bɛ na ni bi fɛnɲɛnɛmaw ye laadala sow kɔnɔ. Layini saniyalenw ni fɛnɲɛnamafagalan fitininw bɛ yɔrɔ cɛɲiw dilan.

Glass suganditaw b’a to i bɛ i ɲɛda cogoya ladilan cogo dafalen na:

Glass suguyaw:

• Glass jɛlen: Yeelenba, bi minimalisme

• Glass frosted: Mɔgɔ dogoyɔrɔ ka fara yeelen cili kan

• Glass texturé: Modèles decoratifs, nafa yecogo

• Glass tinted: Tile kɔlɔsili, kulɛriw bɛ tali kɛ ɲɔgɔn na

Kalansenw bɛ dilancogo wɛrɛ fara a kan:

U bɛ nafolo nafa bonya kosɛbɛ. Sannikɛla minnu bɛ se ka kɛ, olu ka di yɔrɔw ye minnu bɛ se ka wuli ka bɔ u nɔ na, ​​yɔrɔ minnu falen bɛ yeelen na. Bi nisɔndiya bɛ jamanaden fitininw sama minnu bɛ ɲɛnamaya dafalen bila jɔyɔrɔ fɔlɔ la, min bɛ se ka ladamu.

Nafa minnu bɛ sɔrɔ sɔrɔli la

Sliding mechanisms bɛ farikolo cɛsiri fitinin de wajibiya walasa ka baara kɛ. U ka nɔgɔn kosɛbɛ ka tɛmɛ da girinmanw kan minnu bɛ siri walima minnu bɛ se ka foli kɛ cogo gɛlɛn na. O b’a to u ka ɲi denbaya kɔnɔmɔgɔ kɔrɔbaw ma walima mɔgɔ o mɔgɔ bolo, taama gɛlɛya bɛ min na.

Gliding kɛcogo nɔgɔman bɛ dɔ bɔ degun na kolotugudaw ni farikolo yɔrɔw la. Sama, ka gɛlɛya, walima ka kɛlɛ kɛ ni fɛnɲɛnamafagalan kuncɛbaw ye. Degun nɔgɔman dɔrɔn bɛ hali panneau belebelebaw lamaga k’a sɔrɔ cɛsiri ma kɛ.

Sɔrɔcogo minnu bɛ yen:

• Track minnu ka dɔgɔn, olu bɛ faratiw ban minnu bɛ mɔgɔ bila ka wuli

• Baarakɛcogo ɲuman bɛ fanga dɔgɔya de wajibiya

• Da wulilenw bɛ se ka wotoroninw ladon nɔgɔya la

• Yɔrɔjan kunnafoni suganditaw bɛ sɔrɔ sistɛmu dɔw la

A sigicogo ɲuman bɛ wuli-ka-bɔ-yɔrɔw ni ɲɔgɔn cɛ minnu tɛ bali. Dakunw walima sira kɔrɔtalenw tɛ yen walasa ka taama. Nin diɲɛ bɛɛ ka dilancogo in bɛ bɛɛ nafa, a tɛ nafa don mɔgɔ minnu dɔrɔn na minnu mago bɛ taa-ka-segin na.

U nafa ka bon kɛrɛnkɛrɛnnenya la kɔrɔya-yɔrɔ labɛnni na. Denbayaw bɛ se ka sow sɛmɛntiya walasa ka kɛɲɛ ni farikolo seko caman yeli ye, k’a sɔrɔ jɔli baarabaw ma kɛ.

Nafa nafama minnu bɛ Glass Da So Tilalanw na minnu bɛ Sliding

Kuwati baarakɛcogo ɲuman haminankow

Glass panneau belebelebaw ka ɲi nka u ye fanga bɔnɛbagaw ye. Funteni bɛ bɔ u fɛ joona kosɛbɛ ka tɛmɛ kogow kan minnu tɛ ni fɛnw ye. O bɛ kɛ sɔngɔba ye waati gɛlɛnw na, yɔrɔ minnu na funteni ni nɛnɛ musakaw bɛ caya.

Tilemana bɛ na ni gɛlɛyabaw ye. Glass bɛ nɛnɛ funteni bila ka taa i ka so kɔnɔ. Samiya bɛ gɛlɛya wɛrɛ lawuli - funteni sɔrɔli bɛ fiɲɛdilan kɛ baara kɛ waati tɛmɛnen na.

Fanga bɔnɛni sumalen:

Aw ka fanga musakaw bɛna o danfara jira. So minnu bɛ woroduguyanfan waatiw la, olu de bɛ nɔba bila nɛnɛ kalow la. Saheli sow bɛ gɛlɛya sɔrɔ kosɛbɛ ni samiyɛ nɛnɛ musakaw ye.

Fɛnɲɛnɛmafagalanw bɛ yen walasa ka fanga bɔnɛ dɔgɔya:

• Glasi minnu bɛ E dɔgɔya, olu bɛ funteni jira ka segin so kɔnɔ

• Glass fila walima saba bɛ insulasi layɛrɛw fara a kan

• Weelecogo ɲuman bɛ yɔrɔw datugu karamɔgɔya lamini na

• Sumaya tigɛlanw bɛ dɔ bɔ funteni tali la

O fɛnw sɛgɛsɛgɛli bɛ dɔ fara musaka fɔlɔw kan nka u bɛ wari bɔ waati jan kɔnɔ. U nafa ka bon waatiw la minnu funteni ka bon kosɛbɛ.

Ladonni wajibiyalenw

Glasi da minnu bɛ wuli, olu ka kan ka jateminɛ tuma bɛɛ walasa u ka baara kɛ ka ɲɛ. O siraw bɛ buguri, sokɔnɔbaganw kunsigi ani nɔgɔw lajɛ tuma bɛɛ. O bɔgɔdaga in bɛ daaw nɔrɔ ani ka sɔgɔli mankanw lawuli minnu bɛ mɔgɔ tɔɔrɔ.

Sirako saniya bɛ kɛ dɔgɔkun baara ye du minnu kɔnɔ mɔgɔw ka ca. Aw mago bɛna kɛ burusi kɛrɛnkɛrɛnnenw na walasa ka se nkɔni sirilenw ni yɔrɔw la minnu sirilen don. Nɔgɔ minnu dalajɛra, olu bɛ se ka wulicogo tiɲɛ waati tɛmɛnen kɔfɛ.

Ladonni baara:

Glasi panɛri belebelebaw bɛ bolokɔni, nɔgɔ ani ji yɔrɔ bɛɛ jira. U mago bɛ saniya la tuma caman walasa u ka to ka jɛya i n’a fɔ kristalɛ. Walasa ka se pankurun sanfɛtaw ma, o bɛ lada walima saniyaminɛn kɛrɛnkɛrɛnnenw de wajibiya.

Baarakɛlaw ka ladonni bɛ kɛ sababu ye ka sistɛmuw baara ka ɲɛ. San o san tune-ups bɛ gɛlɛyaw minɛ sanni u ka kɛ dilan sɔngɔ gɛlɛnw ye. O bɛ musakaw fara a kan minnu bɛ senna, dutigi caman tɛ minnu makɔnɔ.

Danyɔrɔ minnu bɛ mɔgɔ dogoyɔrɔw la

Mankan bɛ taama nɔgɔya la gilasi tilayɔrɔw fɛ. U tɛ se ka bɛn kogo gɛlɛnw ma mankan dɔgɔyali kama. Telefɔni weleli, telewisɔn ani barow bɛ taa sow ni ɲɔgɔn cɛ.

Glass jɛlen bɛ zeru di yecogo dogolen ma. Bɛɛ bɛ fɛn bɛɛ ye min bɛ kɛ fan fila bɛɛ fɛ. O bɛ kɛ sababu ye ka ko gɛlɛnw lase sugolanw, birow ani sanuyasow kɔnɔ.

Gundolakow ɲɛnabɔcogo:

• Glass frosted bɛ yecogo bali ka sɔrɔ ka yeelen bila

• Glass textured bɛ danbe sugandicogo dɔw di

• Smart glass bɛ wuli ka bɔ jɛlen na ka taa opaque la ɛntɛrinɛti fɛ

• Furakɛli minnu bɛ mankan bɔ, olu bɛ dɔ bɔ mankan tali la

O gundolakow ɲɛnabɔcogo bɛ musakabaw fara sistɛmu jɔnjɔnw kan. Glasi hakilitigi fɛɛrɛ bɛ se ka sɔngɔ kɛ siɲɛ fila walima siɲɛ saba. Hali gilasi min bɛ kɛ ni nɛnɛ ye, o musaka ka ca ni pankurun jɛlenw ye minnu bɛ kɛ ka kɛɲɛ ni sariya ye.

Mankanw bɔli bɛ to gɛlɛya la hali ni fɛn dɔw sɛmɛntiyalen don. U tɛna bɛn abada kogo gɛlɛnw ma fɔlikan farali kama. O bɛ dan Kɛ u nafa la mankan-minɛnw na.

Lakanali jateminɛw

Glass bɛ lakana gɛlɛya jɛlenw lawuli. Donbagaw bɛ se ka i ka so kɔnɔna ye nɔgɔya la. U bɛ se fana ka galasi panɛriw kari walasa ka don.

Laadalata dakunw dacogo barika ka dɔgɔ ka tɛmɛ da jɔlenw kan. Da caman minnu bɛ se ka wuli, olu bɛ baara kɛ ni da nɔgɔmanw ye sanni ka kɛ da sɔgɔlan barikamaw ye. O b’a to u bɛ kɛ laɲini nɔgɔmanw ye ka ɲɛsin binkannikɛlaw ma.

Lakanali haminankow:

• Yecogo - Juguyakɛlaw bɛ se ka fɛn nafamaw ni kɛcogo kɔrɔw kɔlɔsi

• Glass kari - Donda ka nɔgɔn ka tɛmɛ da gɛlɛnw kan

• Kɔlɔsili barikamaw - Lakanali fɛnɲɛnamafagalan suganditaw danma

• Track lifting - Da dɔw bɛ se ka kɔrɔta ka bɔ siraw kan

Bi lakana yiriwaliw bɛ dɛmɛ ka nin ko ninnu ɲɛnabɔ:

Kɔnɔna baarakɛcogo bɛ dɔ bɔ lakana faratiw la kosɛbɛ. Sow kɔnɔna na, gilasi so tilayɔrɔ minnu bɛ wuli, olu tɛ bagabagali caman sɔrɔ ka tɛmɛ kɛnɛma daaw kan.

Installation (dadon) gɛlɛya ni musakaw

A bɛ se ka fɔ ko baarakɛlaw ka sigili ka kan tuma bɛɛ. Sitimɛw bɛ sumani tigitigiw ni jɔcogo dɔnniya de wajibiya. DIY filiw bɛ se ka kɛ sɔngɔba ye ani farati bɛ u la.

Kogo minnu bɛ doni ta, olu bɛ gɛlɛyabaw lase mɔgɔ ma. I tɛ se ka da tigɛ dɔrɔn ni ɛntɛrinɛti sɛgɛsɛgɛli ɲuman ma kɛ. O bɛ fɛn dilannikɛlaw ni fɛn dilanni injiniyɛriw fara i ka porozɛ jɛkulu kan.

Gɛlɛya minnu bɛ sɔrɔ sigili la:

• Sumanikɛlan tigitigi minnu ka kan ka kɛ walasa ka bɛn ɲɔgɔn ma ka ɲɛ

• Yɛlɛma bɛ se ka kɛ sigida labɛncogo la, o bɛ se ka kɛ wajibi ye

• Kuran baara min bɛ kɛ otomatiki sitɛmuw kama

• Dugukolo jiginni bɛ siraw lamini

Musow ka musaka tilatilali:

Kogo caman caman cili bɛ musakaw caya joona. Installation dɔw bɛ permis ni sɛgɛsɛgɛliw de wajibiya. O bɛ poroze waatiw janya ani ka biroko gɛlɛya dɔ fara a kan.

Muɲuli ni a doncogo koɲɛw

Yɔrɔ minnu bɛ lamaga, olu bɛ sɛgɛn waati tɛmɛnen kɔfɛ. Rollers bɛ yɔrɔ fla sɔrɔ ani tracks bɛ grooves sɛgɛnnenw sɔrɔ. O gɛlɛyaw b’a to da baara bɛ gɛlɛya ka taa a fɛ.

Glass panneaux bɛ tiɲɛni faratiw sɔrɔ ka bɔ u nɔfɛkow ni degunw na. Glass tempered barika ka bon nka a bɛ se ka tiɲɛ hali bi pewu. Fɛn caman cili musakaw ka bon, kɛrɛnkɛrɛnnenya la, ka kɛɲɛ ni ladamu hakɛw ye.

Gɛlɛya minnu ka teli ka sɔrɔ finidoncogo la:

• Roller bearing failure - A bɛ sɔgɔli, nɔrɔli da

• Track warping - A bɛ kɛ sababu ye ka alignment koɲɛw sɔrɔ

• Glass stress cracks - A ka ca a la a bɛ daminɛ dakunw na

• Frame loosening - A bɛ nɔ bila baara kɛcogo ɲuman na

Sow bɛ sigi waati kɔnɔ. O bɛ daaw sigicogo fili ka bɔ ɲɔgɔn na dɔɔni dɔɔni. San o san ladiliw bɛ kɛ wajibi ye walasa ka baara kɛcogo ɲuman sabati.

Yɔrɔ caman cili Gɛlɛyaw:

• Hardware models minnu dabilalen don

• Yɔrɔ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Waati janw bɛ kɛ ka ɲɛsin komandi kɛrɛnkɛrɛnnenw ma

• Musaka caman bɛ kɛ yɔrɔ kelen-kelen bɛɛ la

Jogoɲumanya siratigɛw bɛ mɛn nka u musaka ka ca a daminɛ na. Sisitɛmu minnu sɔngɔ man gɛlɛn, olu bɛ se ka kɛ sababu ye ka fɛn wɛrɛw bila u nɔ na san 5-10 kɔnɔ. Premium systems bɛ se ka baara kɛ ka ɲɛ san 20+ kɔnɔ ni ladonni ye.

Aplikasi ɲumanw ka ɲɛsin Sliding Glass Room Dividers ma

Salon ni Dumunikɛyɔrɔ faralen ɲɔgɔn kan

Dugukolo da wulilenw ka di mɔgɔw ye nka tuma dɔw la i mago bɛ yɔrɔ ɲɛfɔlenw na. Glasi da minnu bɛ wuli, olu bɛ dumunikɛyɔrɔw dilan yɔrɔnin kelen, minnu bɛ kɛ cogo labɛnnen na ka bɔ sobaw kɔnɔ. U bɛ fiɲɛ dusukunnata mara k’a sɔrɔ u bɛ fɛn caman fara a kan.

Seli dumuniw bɛ kɛ ko cɛɲiw ye gilasi tilayɔrɔw kɔfɛ. I ka dumunikɛyɔrɔ bɛ i n’a fɔ a kɛra ni laɲini ye ani a ye yɔrɔ kɛrɛnkɛrɛnnen ye. Dunanw bɛ dumuni nafamaw kɛcogo ɲɛfɔlen waleɲumandɔn.

Ɲɛnajɛ kɛcogo:

U dafalen don so minnu kɔnɔ, ɲɛnajɛyɔrɔ bɛ kɛ ɲɛnajɛyɔrɔ ye siɲɛ fila. U datugu sufɛdumuni waatiw la walasa ka baro bali ani ka jɛɲɔgɔnya don u ni ɲɔgɔn cɛ. U da wuli o kɔfɛ walasa ka ɲɔgɔn sɔrɔ ani ka ɲɔgɔn sɔrɔ.

Jɛɲɔgɔnya yelen bɛ to hali ni daaw datugulen don. Aw bɛ se ka yɔrɔw ni ɲɔgɔn cɛ ye k’a sɔrɔ aw ma a ye ko u faralen don ɲɔgɔn kan pewu. O bɛ dusukunnata danfaralenw bali, laadala kogow bɛ min da.

So kɔnɔ biro ɲɛnabɔcogo

Yɔrɔjan baara ye an ka so baaracogo Changé. Mɔgɔ caman mago bɛ baarakɛlaw ka yɔrɔw la minnu bɛ tunun baarakɛwaati kɔfɛ. Glasi da minnu bɛ wuli, olu bɛ yɔrɔ o yɔrɔ sɛmɛntiya ka kɛ waati dɔɔnin biro ye.

U bɛ baarakɛyɔrɔ dancɛ sariyalenw Dabɔ. I hakili bɛ danfara dɔn baara ni so ɲɛnamaya cɛ. O hakili ta fan fɛ gɛlɛya in bɛ sinsin ni baarakɛcogo ɲɛ baarakɛwaatiw la.

Nafa minnu bɛ sɔrɔ baara la ka bɔ so:

• Baarakɛlaw ka yecogo videyo weleli kama

• Mankan dɔgɔyali ka bɔ du kɔnɔ baaraw la

• Yɛlɛma teliya la ka segin ɲɛnamaya yɔrɔ la

• Yeelen dafalen bɛ fanga hakɛ mara

Wideyo weleli bɛ kɛ i n’a fɔ baarakɛlaw ka ca gilasi tilayɔrɔw kɔfɛ. Clients ni baarakɛɲɔgɔnw bɛ baarakɛyɔrɔw dilanni ye ni laɲini ye. Glasi kɔkanna bɛ i n’a fɔ a saniyalen don ani a bɛ bi ta kamera la.

Denbaya mankan bɛ to a yɛrɛ la fan dɔ fɛ. Denmisɛnw ka tulon kɛ, telewisɔnw bolitɔ, ani dumunikɛyɔrɔ baaraw tɛna weleli nafamaw tigɛ. I bɛ jɛɲɔgɔnya mara k’a sɔrɔ i bɛ mankan hakɛw kɔlɔsi.

Baara kɔfɛ, aw bɛ u da wuli walasa ka aw ka sigiyɔrɔ sɔrɔ kokura. Biro bɛ tunun o yɔrɔnin bɛɛ. I ka so bɛ i ko sigiyɔrɔ la tugun sanni ka kɛ jagokɛyɔrɔ ye.

Cuisini ni Living Area Division

Tobili bɛ mankanw, kasaw ani yecogo ɲagaminenw lawuli. Glasi da minnu bɛ wuli, o fɛnw bɛ sɔrɔ minnu bɛ u hakili ɲagami k’a sɔrɔ u bɛ jɛɲɔgɔnya sabati. Aw bɛ se ka denmisɛnw kɔlɔsi walima ka baro kɛ ni aw bɛ dumuni labɛn.

U nafa ka bon kɛrɛnkɛrɛnnenya la so tobilikɛla ŋanaw bolo. Tobili kɛcogo gɛlɛnw bɛ ɲagami don i la i bɛ se k’a fɛ ka min dogo. Aw bɛ daaw datugu dumuni labɛnni waati la ka u da wuli walasa ka u di.

Cuisini tilali Nafaw:

Tobili kasa barikamaw bɛ to dumunikɛyɔrɔ la. Jɛgɛ, alikama ani dumuni timimanw tɛna don aw ka so bɛɛ kɔnɔ. O nafa ka bon kosɛbɛ so da wulilenw na.

Saniya bɛ kɛ fɛn ye min bɛ se ka ɲɛnabɔ kosɛbɛ fana. Cuisini nɔgɔlenw tɛ fanga sɔrɔ i ka sigiyɔrɔw kan ɲɛ na. Dunanw tɛna dumuni nɔgɔlenw ye sufɛdumuni kɛtuma na.

Jɛɲɔgɔnya yelen bɛ bangebagaw bila ka denmisɛnw kɔlɔsi tobili kɛtuma na. I bɛ lakana kɔlɔsili mara k’a sɔrɔ i ma a ye ko i yɔrɔ ka jan. Denmisɛnw bɛ se ka degeliw kɛ dumunikɛyɔrɔw la k’aw to sufɛdumuni labɛnni na.

Sugu ni Ensuite Saniyaso faralen ɲɔgɔn kan

Master bedroom suites bɛ nafa caman sɔrɔ gilasi tilayɔrɔw la. U bɛ da wulilen mara, min bɛ i n’a fɔ spa, k’a sɔrɔ u bɛ danbe suganditaw di. I bɛ flexibilité sɔrɔ laadala kogow tɛ se ka min di.

Sɔgɔmadafɛla kɛcogo bɛ kɛ ka ɲɛ ni yɔrɔw bɛ woyo ɲɔgɔn fɛ. Mɔgɔ kelen bɛ se ka ko ka sɔrɔ tɔ kelen bɛ fini don. Glass bɛ jɛɲɔgɔnya sabati ka sɔrɔ a bɛ danfara nafama di.

Gundolakow ɲɛnabɔcogo:

• Smart glass - A jɛlen don walasa ka da wuli, a bɛ frosted walasa ka mɔgɔ dogo

• Panneaux frosted - Gundo banbali, yeelen bɔli

• Fiyentɔw minnu bɛ baara kɛ ni motɛri ye - Gundolafɛnw hakɛ minnu bɛ se ka ladilan

• Rido siraw - Soft fabric danbe suganditaw

U dafalen don furuɲɔgɔnmaw kama minnu ka waati bolodacogo tɛ kelen ye. Aw bɛ u datugu sɔgɔmada joona fɛ walew kama minnu tɛna sunɔgɔɲɔgɔnw degun. U da tile fɛ walasa ka dusukunnataw sɔrɔ minnu ka bon, minnu ni ɲɔgɔn cɛsirilen don.

Master suites misɛnninw bɛ i ko u ka bon kosɛbɛ ni gilasi tilayɔrɔw ye. Laadalata kogow b’a to sugolan fitininw bɛ kɛ i n’a fɔ u ka dɔgɔ yɛrɛ. Glass bɛ yɔrɔ yetaw mara k’a sɔrɔ a bɛ baarakɛyɔrɔw da.

Lotɛli cɛɲiw bɛ baara kɛ ni o hakilina ye kosɛbɛ. A bɛ o yɔrɔ sanfɛla, min bɛ i n’a fɔ spa, o bɛ kɛ so kɔnɔ. I ka sugolan bɛ i n’a fɔ lafiɲɛbɔyɔrɔ suite ka tɛmɛ sunɔgɔyɔrɔ jɔnjɔn kan.

Basement ani Recreation Room Aplikasiw

Tuma caman na, dugujukɔrɔyɔrɔw bɛ baara caman kɛ waati kelen na. Glasi da minnu bɛ wuli, olu bɛ yɔrɔw dilan minnu tɛ kelen ye, k’a sɔrɔ u jɔli musaka man ca. U bɛ dugujukɔrɔyɔrɔ dafalenw sɛmɛntiya ka kɛ yɔrɔ caman ye minnu bɛ se ka baara kɛ ni u ye kosɛbɛ.

Basement baarakɛcogo minnu bɛ kɛ tuma caman na:

U ka ɲi kosɛbɛ balikuw ni denmisɛnw ka yɔrɔw farali la. Bangebagaw bɛ se ka ɲɛnajɛ kɛ k’a sɔrɔ denmisɛnw bɛ tulon kɛ u kɛrɛfɛ lafiya la. Kɔlɔsili ɲɛnama bɛ taa ɲɛ ka sɔrɔ mankan hakɛ bɛ to ka kɔlɔsi.

So kɔnɔ sinemasow mago bɛ mankanw yɔrɔ la walasa u ka baara kɛ ka ɲɛ. Glass tilalanw bɛ mankan joli dɔgɔya ka taa yɔrɔw la minnu bɛ u kɛrɛfɛ. Denbaya kɔnɔmɔgɔw bɛ se ka baara kɛ ni dugujukɔrɔyɔrɔ wɛrɛw ye filimu suw la.

Farikoloɲɛnajɛ yɔrɔw bɛ mankan bila, wa u bɛ fiɲɛ bila u la. Glasi daaw kɔnɔ, minɛnw mankan bɛ sɔrɔ ka sɔrɔ u bɛ fiɲɛ bila ka taa. U bɛ farikoloɲɛnajɛ minɛnw fana dogo ni u tɛ baara la.

Bololabaara ni ɲɛnajɛyɔrɔw ka teli ka kɛ i n’a fɔ u ɲagaminen don porozew senfɛ. Aw bɛ daaw datugu walasa ka baara kɛlenw dogo dunanw ma. U da wuli tuma min na aw mago bɛ yɔrɔ caman na porozebaw kama.

Denbaya minnu bɛ bɔnsɔn caman na, olu bɛ nafa sɔrɔ kɛrɛnkɛrɛnnenya la dugujukɔrɔ tilali la. Funankɛninw bɛ yɔrɔw sɔrɔ minnu tɛ kelen ye, k’a sɔrɔ bangebagaw bɛ kɔlɔsili mara. Bɛɛ bɛ ni waajulikɛyɔrɔ ye k’a sɔrɔ u bɛ yɔrɔ bɛɛ lajɛlen tila ɲɔgɔn na.

Glass Sliding Door Room Dividers suguyaw

Panneau kelen Da minnu bɛ wuli

Panɛli kelen sigicogo bɛ fɛɛrɛ nɔgɔman di gilasi so tilacogo la. Glass panneau belebele kelen bɛ sɛgɛn sira kelen kan. U dafalen don dakun misɛnninw ni baarakɛnafolo gɛlɛnw kama.

Operasiyɔn tun tɛ se ka nɔgɔya ka tɛmɛ o kan. Aw bɛ panɛri digi kinin fɛ walima kinin fɛ walasa ka yɔrɔ da wuli walima ka a datugu. Foli fɛɛrɛ gɛlɛnw tɛ yen walima yɔrɔ caman lamagannenw ka kan ka ladon.

Nafa minnu bɛ Panɛli kelen na:

• Yɔrɔ minnu bɛ lamaga, olu dɔgɔyali kɔrɔ ye ko ladonni ka dɔgɔn

• A daminɛ musaka ka dɔgɔn ka tɛmɛ pankurun caman sigicogo kan

• DIY sigili nɔgɔn don dutigiw bolo minnu bɛ se ka baara kɛ

• Track yɔrɔ fitinin min ka kan ka kɛ

U bɛ baara Kɛ kosɛbɛ dakunw na minnu bonya bɛ Se mɛtɛrɛ 8 ma. Panɛri belebelebaw bɛ kɛ fɛn gɛlɛnw ye ani u lamagacogo ka gɛlɛn. Glasi girinya bɛ se ka degun siraw ni wuluwuluw kan waati kɔnɔ.

Yɔrɔ wajibiyalenw:

Panɛli kelenw mago bɛ kogo yɔrɔ la min bɛ bɛn u bonya ma ni u dabɔra. Da min janya ye mɛtɛrɛ 6 ye, o bɛ kogo kɛrɛfɛyɔrɔ mɛtɛrɛ 6 de wajibiya. O bɛ dan sigi yɔrɔ suganditaw la so dɔw kɔnɔ.

Musow ka musaka dɔgɔyali b’a to u bɛ diya porozew ye minnu bɛ baara kɛ ni baarakɛnafolo ye. A ka c’a la, u musaka ka dɔgɔ ni 30-50% ye ka tɛmɛ pankurun caman sigicogo kan minnu bɛ se ka suma ɲɔgɔn ma. Installation baarakɛlaw musakaw fana ka dɔgɔ.

Sistɛmu minnu bɛ panneau caman sɔrɔ

Panneau multi-systemes bɛ da belebelebaw ɲɛnabɔ ni fɛn caman sɛgɛsɛgɛli ye. Panɛli fila, saba walima naani bɛ baara kɛ ɲɔgɔn fɛ walasa ka da belebelebaw dilan. U bɛ ɲɔgɔn dalajɛ ɲɔgɔn fɛ ni u dabɔra.

Accordion-style foli bɛ da wulicogo bonya camanba dilan. Panɛriw bɛ segin ka da u yɛrɛ kan i n’a fɔ fiɲɛbɔlan. O stacking fɛɛrɛ in bɛ baara kɛ ni kogo yɔrɔ fitinin ye ni a dabɔra.

Panneau caman labɛncogo:

Baara kɛcogo bɛ danfaraba la:

• Bi-fold - Panɛriw bɛ foli fila-fila

• Accordion - Panɛli bɛɛ bɛ da ɲɔgɔn na

• Sliding-stacking - Panɛliw bɛ sɔgɔsɔgɔ ani ka ɲɔgɔn dalajɛ fla

• Pocket systems - Panɛriw bɛ tunun kogow kɔnɔ

Pocket door systems bɛ yɔrɔ baarakɛcogo ɲumanba di. Panɛriw bɛ sɛgɛn pewu ka don kogow kɔnɔ. U bɛ tunun pewu ni u dabɔra, ka kogow dabɔ minnu tɛ tigɛ.

Installation (dadon) gɛlɛya bɛ bonya ni pannew jate ye. Panneau caman kɔrɔ ye tracks, rollers ani adjustment points caman ye. Baarakɛlaw ka sigili bɛ kɛ fɛn nafama ye walasa ka baara kɛ ka ɲɛ.

Glass suguyaw ni sugandiliw

Glass sugandili bɛ nɔba bila a yecogo ni a baarakɛcogo bɛɛ la. Sugu kelen-kelen bɛɛ bɛ baara kɛ ni danbe ni cɛɲi magow ye minnu tɛ kelen ye. Lakanali wajibiyalenw fana bɛ nɔ bila gilasi sugandili la.

Glass jɛlen bɛ yeelen bɔli ni ɲɛnayeli jɛɲɔgɔnya caya. A bɛ dusukunnata dafalenba lase yɔrɔw ni ɲɔgɔn cɛ. Boloci ni nɔgɔw bɛ jira nɔgɔya la yɔrɔ jɛlenw kan.

Glass suguya sangali:

Glass frosted bɛ mɔgɔ dogoyɔrɔ ɲuman di ka sɔrɔ ka yeelen bolicogo mara. A bɛ baara kɛtaw dogo fan fila bɛɛ la pewu. Saniyaso ni sugolan baarakɛcogo bɛ nafa sɔrɔ panɛriw la minnu bɛ kɛ ni nɛnɛ ye.

Glass textured sugandiliw ye ninnu ye:

• Sanji galasi - Ji jɔlen cogoyaw minnu bɛ i n’a fɔ ji

• Glass kisɛ - Bubble textures a fan bɛɛ la

• Glasi ribbed - Layini minnu bɛ jɛgɛn walima minnu bɛ jɔ

• Etched glass - Ka kɛɲɛ ni mɔgɔw sago ye

Lakanali galasi tempered de wajibiyalen don sigili fanba la. A bɛ kari ka kɛ fɛn misɛnninw ye, farati tɛ minnu na sanni ka kɛ fɛn nɔgɔlenw ye. A ka c’a la, boonw jɔcogo sariyaw b’a fɔ ko galasi tempered (glasi tempéré) ka kɛ so tila-tilayɔrɔw ye.

Lakanali gilasi wajibiyalenw:

• Glass tempered for panneaux minnu ka ca ni mɛtɛrɛ kɛrɛnkɛrɛnnen 9 ye

• Glass lamininen don yɔrɔw la, mɔgɔw bɛ taa yɔrɔ minnu na kosɛbɛ

• Lakanali filimu baarakɛcogo minnu bɛ kɛ gilasi kɔrɔlenw na

• Sugandili minnu tɛ se ka nɔ bila jago la

  
  

Kalansenw ka fɛnw suma ɲɔgɔn na

Kalansenw kɔnɔfɛnw bɛ nɔ bila u muɲuli, u yecogo ani u ladonni wajibiyalenw na. Fɛn kelen-kelen bɛɛ bɛ nafa ni gɛlɛya danfaralenw di. I ka sugandili bɛ nɔ bila musaka fɔlɔw la ani wasa kuntaalajan na.

Aluminiyɔmu karamɔgɔya bɛ sugu la kun ɲumanw kosɔn. U ka nɔgɔn, u tɛ sɔgɔ, wa u bɛ mɛn cogo kabakoma na. Bi finiw bɛ aliminiyɔmu kɔrɔlenw ka sigida cogoya ban.

Aluminiyɔmu Kalansen Nafaw:

• Fɛn minnu dilannen don ni mugu ye, olu bɛ se ka sɔgɔsɔgɔ ani ka tunu

• Ladonni wajibiyalen fitininw

• A barika ka bon kosɛbɛ galasi panɛri belebelebaw ma

• Kulɛri suguya caman bɛ sɔrɔ

Lɔgɔdaga bɛ na ni funteni ni laadala ɲɛnajɛ ye gilasi tilayɔrɔw la. U bɛ baara kɛ ka ɲɛ dugu kɔnɔ, bololabaarakɛlaw ani laadala so cogoyaw la. Lɔgɔdaga minnu ka ɲi kosɛbɛ, olu bɛ se ka mɛn san tan caman kɔnɔ ni u ladonna ka ɲɛ.

Lɔgɔ karamɔgɔ jateminɛw:

Nɛgɛdaga minnu bɛ kɛ sababu ye ka ɲɛnajɛ ja gɛlɛnw, iziniw dilan. U barika ka bon kosɛbɛ, wa u bɛ se ka gilasi panɛri girinmanw dɛmɛ nɔgɔya la. Nɛgɛdaga nɛrɛmaw ka di kɛrɛnkɛrɛnnenya la bi sow kɔnɔ ani bi sow kɔnɔ.

Ladonni wajibiyalenw ka kɛɲɛ ni fɛnw ye:

Aluminiyɔmu:

• San o san saniya ni safinɛ nɔgɔman ye

• Aw bɛ weatherstripping lajɛ san o san

• Aw bɛ tulu kɛ siraw la kalo 6 o kalo 6

  
  

Yiri:

• Aw bɛ segin ka a kɛ san 3-5 o san 3-5

• Aw bɛ to ka a lajɛ ni ji tiɲɛna

• Cɛmancɛ ni penti kokura i n’a fɔ a mago bɛ cogo min na

  
  

Nɛgɛ:

• Aw bɛ a kɔlɔsi ni nɔgɔ nɔw bɛ yen

• Aw bɛ maga penti sɔgɔlenw na o yɔrɔnin bɛɛ

• Aw bɛ farikolo tangalanw kɛ yɔrɔw la minnu ka ɲi

  
  

Kalansen bonya bɛ nɔ bila gilasi panɛli hakɛ dantigɛliw la. Kalansen fitininw bɛ i ko ka ɲɛ nka u bɛ dan sigi galasi hakɛ la. Kalansen minnu ka bon, olu bɛ panɛri belebelebaw dɛmɛ nka u bɛ i n’a fɔ u ka bon kosɛbɛ.

Jateminɛ minnu ka kan ka kɛ ka ɲɛsin Sliding Glass Room Dividers ma

Jagokɛcogo wajibiyalenw

Kogo minnu bɛ doni ta, olu de bɛ sigili gɛlɛyabaw lase. I tɛ se ka da tigɛ dɔrɔn ni ɛntɛrinɛti sɛgɛsɛgɛli ɲuman ma kɛ. O kogow bɛ aw ka so jɔcogo dafalen dɛmɛ, wa u bɛ labɛn ɲuman de wajibiya.

Kɔnɔna kogo fanba bɛ doni dɔw ta minnu bɛ kɛ ni jɔli ye. U bɛ duguma, sanfɛla walima so sanfɛlanw dɛmɛ u sanfɛ. Ni aw ye yɔrɔw bɔ, o bɛ aw ka so kɔnɔna fanga dɔgɔya fo ni a barika bonyana ka ɲɛ.

Kogo jiralanw minnu bɛ doni ta:

• Kogo minnu bɛ boli ka tilennen to duguma jirisunw na

• Kogow bɛ kɛ jirisunw walima jirisunw jukɔrɔ yɛrɛ

• Kogo minnu bɛ duguma walima so sanfɛlanw dɛmɛ sanfɛ

• Kogo minnu bɛ span janw cɛmancɛ la

Baarakɛlaw ka sigicogo jateminɛ nafa ka bon sani aw ka da fɛn o fɛn tigɛ. Ɛntɛrinɛti ɲɛmɔgɔw bɛ se ka fɛn caman sɛmɛntiyacogo dɔw latigɛ minnu tɛ mɔgɔ tɔɔrɔ. U bɛna barikadon wajibiyalenw ɲɛfɔ walasa ka sigikafɔ dafalen sabati.

Mounting Options Available:

Sistɛmu minnu bɛ dulon plafond kan, olu bɛ plafond jɔcogo ɲuman de wajibiya. Joists ka kan ka panneau girinya dɛmɛ ka fara doni fangamaw kan. Plafond dɔw mago bɛ barika la sani u ka sigi.

Floor-track systems bɛ dakunw jiginniw Dabɔ. Olu bɛ se ka kɛ faratiw ye minnu bɛ mɔgɔ bila ka wuli ni u ma labɛn ka ɲɛ. Wotoroninw sɔrɔli bɛ sira kɛrɛnkɛrɛnnenw de wajibiya minnu tɛ fɛnba ye.

Sumani ni Labɛnni

Sumanikɛcogo tigitigiw nafa ka bon kosɛbɛ walasa ka bɛn ɲɔgɔn ma ka ɲɛ. Hali fili misɛnninw bɛ se ka baara kɛcogo ɲuman bali walima ka danfara don. Installateur professionnels bɛ suman siɲɛ caman sanni u ka components komandi.

Sumanikɛlan nafamaw:

• Da wulicogo bonya bɛ sanfɛ, cɛmancɛ ani duguma

• Da wulicogo janya bɛ numan fɛ, numan fɛ ani cɛmancɛ la

• Kogo janya ka ɲɛsin bɔrɔ da sigidaw ma

• Dugukolo nivoya da wulicogo bɛɛ la

Clearance wajibiyalenw bɛ tɛmɛ da wulicogo yɛrɛ kan. Panɛriw mago bɛ yɔrɔ la walasa u ka se ka sɛgɛn ani ka u dalajɛ ka ɲɛ. Aw bɛ o yɔrɔjanw jatebɔ sani aw ka aw ka layidu laban.

Clearance wajibiyalenw:

Tuma caman na, kuran jateminɛw bɛ ye ka ban labɛn kɛtuma na. Yeelenbɔlanw, yeelenbɔlanw ani yeelenbɔlanw bɛ se ka kɛ sababu ye ka wuli ka taa yɔrɔ wɛrɛ la. Aw ye o fɛn caman labɛn joona walasa ka fɛn caman sɛmɛntiya kɔfɛ.

HVAC sitɛmuw fana ka kan ka jateminɛ kɛrɛnkɛrɛnnen kɛ. Aw kana segin fiɲɛbɔyɔrɔw walima fɛnw dilanyɔrɔw datugu. Glass panneaux bɛ se ka nɔ bila fiɲɛbɔcogo la i ka so bɛɛ kɔnɔ.

Labɛnni sɛgɛsɛgɛli sɛbɛn:

• Aw bɛ da wulicogo hakɛw suman ka ɲɛ

• Aw bɛ a lajɛ ni kuran bɛ ɲɔgɔn sɔsɔ

• Aw bɛ HVAC sitɛmu bɛnkan sɛgɛsɛgɛ

• Panneau stacking yɔrɔw labɛn

• Aw ye jateminɛ kɛ mebɛriw bilali nɔfɛkow la

  
  

Installation professionnelle vs DIY Bamako

Panneau kelen-kelen-minɛn nɔgɔmanw bɛ se ka kɛ DIY-friendly ye sotigiw fɛ minnu bɛ se kosɛbɛ. Nka, installations fanba bɛ baarakɛlaw ka dɔnniya de wajibiya. O gɛlɛya bɛ bonya joona ni sistɛmu ka ɲɛtaa ye.

Tuma min na i ka kan ka baarakɛlaw ta baara la:

• Yɛlɛma o fɛn o fɛn ka kan ka kɛ sigida jɔcogo la

• Panneau caman walima pocket door systems

• Kuran baara wajibiyalenw

• Track systems gɛlɛnw

• Glasi panneau girinmanw minnu girinya bɛ tɛmɛ kilo 100 kan

Installateur professionnels bɛ na ni baarakɛminɛn kɛrɛnkɛrɛnnenw ni dɔnniya ye. U bɛ gɛlɛyaw ɲɛnabɔ ka ɲɛ, u ma miiri minnu na. Garanti dafalen ka teli ka kɛ ni baarakɛlaw ka sigili ye fana.

DIY wajibiyalenw:

DIY baarakɛminɛn nafamaw:

• Laser nivo walasa ka ɲɔgɔndan tigitigi kɛ

• Drill min bɛ baara gɛlɛn kɛ walasa ka ankɔri sigi

• Sɔgɔlan sɛrɛkili walima sɔgɔlan min bɛ segin-ka-bɔ

• Lakanali minɛnw ɲɛ tangalanw sen bɛ o la

• Kɔrɔtaminɛn minnu bɛ kɛ panɛri girinmanw kama

  
  

DIY Gɛlɛya minnu bɛ sɔrɔ tuma caman na:

• Dugukolo minnu tɛ kelen ye, olu bɛ sira shimming de wajibiya

• Plafond joists ma bɛn ɲɔgɔn ma ka ɲɛ

• Kuran filiw walima pɔmpi dogolenw

• Glass panneaux minnu girinya ka bon ka tɛmɛ a tun bɛ fɔ cogo min na

• Track alignment gɛlɛyaw

  
  

A ka c’a la, baarakɛlaw ka sigili musakaw bɛ daminɛ dɔrɔmɛ 500-1500 na. O ye sumanikɛcogo ɲuman, ɲɔgɔndan ani kɔrɔbɔli ye. Tuma caman na, wari bilalen bɛ sara ni baarakɛcogo ɲuman ye ani garanti lakanani fɛ.

So jɔcogo sariyaw ni yamaruyaw

Sigida sow jɔcogo sariyaw bɛ gilasi sigicogo wajibiyalenw ɲɛnabɔ. Olu bɛ danfaraba don kiritigɛlaw ni ɲɔgɔn cɛ. Aw ye wajibiw lajɛ tuma bɛɛ sani aw ka aw ka poroze daminɛ.

Kode commun ka wajibiw:

• Lakanali galasi yamaruyalen don baara dɔw kama

• Glasi janya hakɛ fitininw ɲɛfɔli

• Ankɔri ni dɛmɛcogo ɲumanw

• Kuran baara permisw ka ɲɛsin kafo kura ma

Lakanali galasi wajibiyalenw bɛ ɲini ka kɛ diɲɛ bɛɛ kɔnɔ. Glass tempered ka kan ka kɛ panɛriw kama minnu bonya kɛrɛnkɛrɛnnen don. Kode fanba bɛ gilasi tempered de wajibiya panneau o panneau ma min ka ca ni mɛtɛrɛ kɛrɛnkɛrɛnnen 9 ye.

Lakanali gilasi wajibiyalenw:

Permis wajibiyalenw tɛ kelen ye:

• Yɛlɛma minnu bɛ kɛ sigida jɔcogo la, olu mago bɛ yamaruyaw la tuma bɛɛ

• A ka c’a la, kuran baara bɛ permis de wajibiya

• Da caman cili bɛ se ka kɛ ko a mago tɛ permisw na

• Jagokɛyɔrɔw mago bɛ permisw la tuma bɛɛ

Aw bɛ se ka kuma aw ka sigida boonko ɲɛmɔgɔso fɛ joona labɛnni na. U bɛ se ka wajibi kɛrɛnkɛrɛnnenw ɲɛfɔ aw ka sigida la. Jamana dɔw bɛ permis ɲininiw di ɛntɛrinɛti kan walasa ka baara kɛcogo nɔgɔya.

Permis ɲinini kunnafoniw mago bɛ minnu na:

• Installation ja minnu bɛ ɲɛfɔ ka ɲɛ

• Fɛn dilannenw cogoyaw ni u hakɛw

• Structural engineering timbrew ni a mago bɛ a la

• Kuranko bolodalenw ka ɲɛsin kafo kura ma

Sɛgɛsɛgɛli waatiw bɛ danfara ka kɛɲɛ ni poroze gɛlɛya ye. Installation nɔgɔmanw bɛ se ka kɛ mago bɛ sɛgɛsɛgɛli laban dɔrɔn de la. Porozɛ gɛlɛnw bɛ sɛgɛsɛgɛliw de wajibiya taabolo caman na.

Sɛgɛsɛgɛlikɛyɔrɔ minnu bɛ kɛ cogoya la:

• Framing gɛlɛnw ka sɔrɔ ka drywall kɛ

• Kuran rough-in ka sɔrɔ ka datugu

• A sigicogo laban ani lakana sɛgɛsɛgɛli

• Sɛbɛn min b’a jira ko a ye sigiyɔrɔ sɔrɔ ni a mago bɛ a la

Installateur professionnels bɛ permis ɲininiw ni sɛgɛsɛgɛliw ɲɛnabɔ tuma bɛɛ. U bɛ sigida ka wajibiw faamu, wa u bɛ se ka sɔnni kɛcogo ɲɛnabɔ ka ɲɛ. O dɔnniya in bɛ to ka jo di u ka musakabaw ma.

Musow ka musakaw sɛgɛsɛgɛli: Glass da la so tila-tilalanw

Nafolodonni fɔlɔw ka tilali

Glasi da sɔgɔlenw musakaw bɛ danfaraba don ka kɛɲɛ ni u bonya, u kɛcogo ani u ka gɛlɛya ye. Panɛli kelen-kelen sigicogo jɔnjɔnw bɛ daminɛ dɔrɔmɛ 800-1200 ɲɔgɔn na. Premium multi-pannel systems bɛ se ka tɛmɛ $5000 kan.

Da Sistɛmu musakaw ka kɛɲɛ ni suguya ye:

Kalansenw kɔnɔfɛnw bɛ nɔba bila sɔngɔko la. Aluminiyɔmu karamɔgɔya musaka ka dɔgɔ nka jiri ni nɛgɛdaga bɛ 30-50% fara sɔngɔ basigilenw kan. Ladamuni finiw ni kulɛriw bɛ dɔ fara musakaw kan ka taa a fɛ.

Glass suguya sɔngɔ danfara:

• Glass clair standard - Basi sɔngɔko

• Frosted walima textured - Aw bɛ 15-25% fara a kan .

• Low-E energie efficient - Aw bɛ 25-40% fara a kan .

• Smart glass technology - Aw bɛ 200-300% fara a kan .

Baarakɛlaw sigili baara bɛ kɛ 20-30% ye poroze musaka bɛɛ lajɛlen na. Installation nɔgɔmanw bɛ $500-1000 bɔ. Porozɛ gɛlɛn minnu bɛ jɔli baara wajibiya, olu bɛ se ka se dɔrɔmɛ 2000-3500 ma.

Fɛn wɛrɛw minnu ka kan ka kɛ tuma caman na:

Porozɛ musaka bɛɛ lajɛlen Misaliw:

• Panneau kelen basigilen - $1300-2500 sigilen don

• Standard bi-fold - $2200-4200 sigilen don

• Premium multi-panel - $4500-8500 sigilen don

• Luxury pocket system - $6.000-12.000 sigilen don

  
  

Nafa jateminɛ minnu bɛ kɛ waati jan kɔnɔ

Kuwati musakaw bɛ bonya ni galasi panɛri belebelebaw ye. So funteni ni nɛnɛ musakaw bɛ se ka wuli 10-25% ka kɛɲɛ ni waati cogoya ye. Glasi min bɛ fanga dɔgɔya, o bɛ dɔ bɔ nka a tɛ o nɔ in ban.

San o san fanga musaka nɔfɛkow :

Ladonni musakaw bɛ lajɛ waati tɛmɛnen kɔfɛ. San o san, baarakɛlaw ka baara bɛ kɛ dɔrɔmɛ 150-300 ye. DIY ladonni bɛ waati ni saniyafɛn kɛrɛnkɛrɛnnenw de wajibiya.

Ladonni musaka minnu bɛ kɛ cogoya la:

• San o san tune-up - $150-300

• Track saniyafɛnw - $50-100 san o san

• Glass cili - $300-800 pankurun kelen na

• Hardware dilancogo - $100-400 i n’a fɔ a mago bɛ cogo min na

Nafolo nafa bonya tuma caman na, o bɛ jo di wari bilali ma. Sow feerelaw bɛ musaka seginni 60-80% fɔ sigida ɲumanw kan. Bi sannikɛlaw nafa ka bon kosɛbɛ yɔrɔw la minnu bɛ se ka wuli ka bɔ u nɔ na, ​​yɔrɔ minnu falen bɛ yeelen na.

Nafolo seginni waatibolodalen:

Kuwati marali bɛ kɛ sababu ye ka nafa kuntaalajan sɔrɔ fana. So minnu bɛ ni gilasi kɛcogo ɲuman ye, olu bɛ diya sannikɛlaw ye minnu bɛ sigida lakana. Tuma caman na, u bɛ feere joona suguw la minnu bɛ ɲɔgɔn sɔrɔ.

Nafolo nafa minnu bɛ sɔrɔ waati jan kɔnɔ:

• Yeelen musakaw dɔgɔyara ka bɔ yeelen nafama na

• HVAC musakaw bɛ dɔgɔya ni gilasi sugandili bɛnnen don

• Dɔ farala feereli seginni nafa kan ani suguw diyabɔli

• Asiransi jigitigɛ minnu bɛ se ka kɛ lakana gilasi la

  
  

Budjet-friendly (budjet-friendly) fɛɛrɛ wɛrɛw

Retrofit suganditaw bɛ baara kɛ ka ɲɛ da minnu bɛ yen. Da wulicogo jɔnjɔnw jiginni musaka ka dɔgɔ ni kura dabɔli ye. I b’i yɛrɛ tanga fɛn sɔngɔ gɛlɛnw ma minnu bɛ kɛ ka fɛnw jɔcogo caman sɛmɛntiya.

Retrofit musaka sumalenw:

Sisitɛmu minnu bɛ baara kɛ ani minnu labɛnna kokura, olu bɛ wari caman mara. Tuma caman na, fɛn dilanni baarakɛyɔrɔ minnu bɛ fɛnw kisi, olu ka teli ka da ɲumanw mara. Jagokɛyɔrɔw labɛnni bɛ sɔrɔyɔrɔ ɲumanw di.

Sistɛmu baaralen jateminɛw:

• Aw bɛ siraw ni wuluwuluw sɛgɛsɛgɛ ka ɲɛ

• Aw bɛ gilasi cogoya ni a lakanani hakɛw sɛgɛsɛgɛ

• Aw bɛ a lajɛ ni fɛnɲɛnamafagalan yɔrɔw dabilalen don

• Factor in saniya ni finiko musakaw

  
  

Kɔrɔsili minnu bɛ se ka kɛ ni sistɛmu kɔrɔlenw ye:

• 40-60% bɛ bɔ sistɛmu kura sɔngɔw la

• Baarakɛlaw ka fɛnw labɛnni bɛ fara $300-800 kan

• A bɛ se ka kɛ ko a tɛ sɔrɔ ka kɛɲɛ ni mɔgɔw sago ye

• A ka c’a la, garanti coverage tɛ don a kɔnɔ

DIY sigili bɛ baarakɛlaw musakaw bɔ pewu. Panneau kelen sitɛmu nɔgɔmanw de bɛ DIY-friendly kosɛbɛ. Panɛli caman sigicogo bɛ seko ni dɔnko kɔrɔlenw ni baarakɛminɛn kɛrɛnkɛrɛnnenw de wajibiya.

DIY musaka dɔgɔyali:

Budjet-Stretching fɛɛrɛw:

• A daminɛ ni sistɛmu jɔnjɔnw ye ani ka sɛgɛsɛgɛli kɛ kɔfɛ

• Aw bɛ hakɛ dantigɛlenw sugandi walasa ka aw yɛrɛ tanga sɔngɔko ma min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Aw bɛ a bila jɔli waatiw la minnu tɛ baara kɛ kosɛbɛ

• Aw bɛ a fara ɲɔgɔn kan ni so ɲɛnabɔli porozɛ wɛrɛw ye

Nafolo sɔrɔcogo minnu bɛ se ka sɔrɔ:

• So ɲɛnabɔli juruw ni ɲɔgɔndan hakɛw ye

• Karti minnu bɛ ni promotion 0% waatiw ye

• Kontrakɛlaw ka wariko ka tɛmɛn installation sociétés fɛ

• So ka bolomafaraw ka juruw porozebaw kama

Sanni waati kɛli fɛɛrɛ ɲuman na, o bɛ se ka dɔ bɔ musakaw la. Waati laban feereli bɛ 20-30% jigin. Dilanbagaw bɛ fɛnmarayɔrɔw jɛya sani fɛn kura ka bɔ kɛnɛ kan.

Sanni waati ɲumanw:

• Late fall ka ɲɛsin sokɔnɔna sigili ma

• Lafiɲɛbɔ kɔfɛ feereli Zanwuyekalo la

• Nafolo san laban ye fɛn dilannikɛlaw ye

• Sɔrɔko gɛlɛya waatiw la ni ɲininiw bɛ dɔgɔya

  
  

Ladonni ni ladonni gafe

Don o don ani dɔgɔkun o dɔgɔkun ladonni

Track saniya bɛ da sɔgɔlen gɛlɛya fanba bali. Bugun, sokɔnɔbaganw kunsigi ani nɔgɔw bɛ dalajɛ joona siraw kan. U bɛ mankanw lawuli minnu bɛ sɔgɔsɔgɔ ani ka daaw kɛ ka nɔrɔ.

Aw bɛ aspiratɛriw lajɛ dɔgɔkun o dɔgɔkun ni crevice tool attachment ye. O bɛ nɔgɔ lafiyalenw bɔ sani a ka dugukolo sɔrɔ ka kɛ yɔrɔw ye minnu bɛ lamaga. Aw bɛ aw janto kɛrɛnkɛrɛnnenya la nkɔni minnu na, fɛnɲɛnamafagalanw bɛ caya yɔrɔ minnu na.

Track Saniya Taabolo:

1. Aw bɛ nɔgɔ lafiyalenw kɛ ni vacuum ye ka bɔ siraw la

2. Aw bɛ a ko duguma ni fini ɲiginnen ye

3. Aw bɛ ɲinmugu kɔrɔ kɛ nɔgɔ kuncɛlenw na

4. Aw bɛ a ja ka ɲɛ walasa ka nɔgɔ bali

5. Aw bɛ a lajɛ ni tiɲɛni walima a sɛgɛnnen don

   
   

Dɔgɔkun saniya waati bolodacogo:

Glass saniya bɛ fɛɛrɛ ɲuman de wajibiya walasa ka a yɛrɛ tanga sɔgɔsɔgɔninjɛ ma. Panɛri belebelebaw bɛ nɔgɔ ni ji yɔrɔ bɛɛ jira. Baarakɛminɛn minnu bɛ kɛ ni baarakɛlaw ye, olu bɛ baara nɔgɔya kosɛbɛ.

Glass saniyacogo ɲumanw:

• Aw bɛ a saniya sɔgɔmada joona fɛ walima wula fɛ walasa tile ka yeelen tilennen bali

• Aw bɛ squeegee kɛ walasa ka sɔrɔw sɔrɔ minnu tɛ streak sɔrɔ

• Aw bɛ baara kɛ ka bɔ sanfɛ ka taa duguma ni sɔgɔsɔgɔninjɛw ye minnu bɛ ɲɔgɔn dafa

• Aw bɛ a dawolo ja joona walasa ka ji nɔw bali

  
  

Saniya furakɛcogo minnu bɛ fɔ:

• Jagokɛlaw ka gilasi saniyalanw walasa ka saniya tuma bɛɛ

• Vinigari finman jilama min bɛ kɛ ji gɛlɛnw nɔw na

• Saniyalanw minnu bɛ bɔ amoniyɔmu la, nɔgɔ gɛlɛnw kama

• Aw bɛ aw yɛrɛ tanga saniyalanw ma minnu bɛ gilasi sɔgɔ

Tumu bɛ kɛ sababu ye ka wuluwuluw ni siraw baara ka ɲɛ. Sisitɛmu fanba mago bɛ tulu la kalo 3-6 o kalo 3-6. Aw bɛ tulumafɛnw dɔrɔn de kɛ minnu dilabaga ye.

Tumu yɔrɔw:

• Roller bearings (ni a bɛ se ka sɔrɔ) .

• Track surfaces yɔrɔ minnu na panɛriw bɛ sɛgɛn

• Pivot points kan foli kɛcogo

• Kɔlɔsili fɛɛrɛw ni bololanɛgɛw

  
  

Waati ladonni baara minnu bɛ kɛ

Weelekun sigili bɛ tiɲɛ waati kɔnɔ ka a sababu kɛ funteni caman yeli ye ani ka a sababu kɛ UV ye. Aw bɛ sigilanw lajɛ kaban ni tilebin bɛɛ. Aw bɛ waatibolodacogo tiɲɛnenw falen sani a ka nɔ bila fanga sɔrɔcogo la.

Weather Seal Sɛgɛsɛgɛli:

• Aw bɛ a ɲini ka faraw, ɲɛjibɔ walima ka gɛlɛya

• Aw bɛ sigilan deguncogo lajɛ ni daaw datugulen don

• Aw bɛ a lajɛ ni fiɲɛ bɛ bɔ a lamini na

• Aw bɛ sigilanw falen minnu bɛ sɛgɛn taamasiɲɛw jira

Sɔgɔmada ladonni bɛ sistɛmuw labɛn walasa baara ka caya kalo funtenimanw na. Tilemana ladonni bɛ mɔgɔ tanga nɛnɛ tiɲɛni ma.

Waati ladonni sɛgɛsɛgɛli sɛbɛn:

Fɛnɲɛnɛmaw sɛgɛsɛgɛli bɛ gɛlɛyaw minɛ sani u ka tiɲɛni sɔngɔ gɛlɛnw lase u ma. Kurukuruw lafiyalenw, wuluwuluw sɛgɛnnenw ani siraw kɔrɔtalenw ka kan ka jateminɛ joona.

Hardware Sɛgɛsɛgɛli yɔrɔw:

• Aw bɛ juruw ni bololanɛgɛw siri minnu lafiyalen don

• Aw bɛ rollo cogoya ni a labɛncogo lajɛ

• Aw bɛ siraw sɛgɛsɛgɛ ni dents walima warping

• Aw bɛ da tugucogo kɔrɔbɔ walasa u ka baara kɛ ka ɲɛ

Baarakɛlaw ka tune-ups san 1-2 o san 1-2 bɛ sistɛmu ɲɛnamaya janya kosɛbɛ. Fɛɛrɛtigiw bɛ gɛlɛyaw minɛ, dutigiw bɛ to ka minnu sɔrɔ. Baarakɛminɛn kɛrɛnkɛrɛnnenw b’u bolo walasa ka ladilan tigitigiw kɛ.

Baarakɛlaw ka baara nafaw:

• Labɛnni tigitigi ni laser nivow ye

• Tumu kɛrɛnkɛrɛnnenw tɛ sɔrɔ feerekɛlaw fɛ

• Yɔrɔw caman cili ka bɔ feerekɛlaw fɛ minnu yamaruyalen don

• Garanti marali baara kɛcogo ɲuman fɛ

  
  

Gɛlɛya minnu bɛ sɔrɔ tuma caman na ani u ɲɛnabɔcogo

Daw nɔrɔli bɛ dutigiw dusu tiɲɛ ka tɛmɛ gɛlɛya tɔw bɛɛ kan. Sababu caman bɛ nin ko in lawuli. Gɛlɛyaw ɲɛnabɔcogo sigilen bɛ a sababu ju dɔn joona.

Da nɔrɔlen gɛlɛyaw ɲɛnabɔcogo:

Fɛn min bɛ kɛ ka fɛnw nɔrɔ ɲɔgɔn na, o furakɛcogo:

1. Aw bɛ siraw saniya pewu

2. Aw bɛ tulu kɛ yɔrɔ lamagannenw bɛɛ la

3. Aw bɛ a lajɛ ni a yɔrɔw kurulen don walima ni u tiɲɛna

4. Aw bɛ daaw labɛncogo ladilan ni aw bɛ se

5. Aw bɛ baarakɛlaw wele ni gɛlɛyaw bɛ to sen na

Track alignment gɛlɛyaw bɛ sɔrɔ dɔɔnin dɔɔnin ni sow bɛ sigi. Dabaw baara bɛ gɛlɛya ani u bɛ se ka pan ka bɔ siraw kan. Ni aw ye a sen don a la joona, o bɛ dilanbaw bali.

Lakɔlɔsili taamasiɲɛw minnu bɛ kɛ ka ɲɛsin ɲɔgɔn ma:

• Dabaw tɛ datugu flush

• Yɔrɔ minnu bɛ ye sira da la

• Grinding walima scraping mankanw

• Dabaw bɛ a ye ko u ka gɛlɛn ka baara kɛ

  
  

DIY Alignment Sɛgɛsɛgɛliw:

• Aw bɛ baara kɛ ni nivo ye walasa ka sira tilennen lajɛ

• Aw bɛ yɔrɔw suman da ni karamɔgɔ cɛ

• Aw bɛ yɔrɔw ɲini minnu sɛgɛnnen don siraw kan

• Aw bɛ da lamagacogo kɔrɔbɔ yɔrɔw la minnu tɛ kelen ye

Glass cili bɛ kɛ wajibi ye, a sɔgɔli walima degun karilen kɔfɛ. Glass tempered bɛ kari pewu ni a tiɲɛna. Aw ye labɛn kɛ walasa ka fɛnw falen teliya la walasa ka lakana sabati.

Glasi caman cili jateminɛw:

Waati min na i ka kan ka baarakɛlaw wele:

• Glass caman cili mago bɛ a la

• Gɛlɛyabaw minnu bɛ sɔrɔ ɲɔgɔndan na

• Roller walima track caman cili

• Kuranko koɲɛw ni otomatiki sitɛmuw ye

• Structure tiɲɛni ka ɲɛsin jiginni yɔrɔw ma

  
  

DIY vs Professional Decision Matrix:

Kɔrɔtɔko dilancogo:

• Glass panneaux tiɲɛnenw (lakanani farati) .

• Dabaw bɔra siraw kan pewu

• Mounting hardware tiɲɛnenw

• Lakanali dakun dɛsɛw

Ladonni kunbɛnni wari bilali: Ladonni sabatili musaka bɛ se dɔrɔmɛ 100-200 ma san o san. Dilanbaw bɛ se ka kɛ dɔrɔmɛ 500-2000 ye. Bana kunbɛnni nafa ka bon tuma bɛɛ ka tɛmɛ kɔrɔtɔko ɲɛnabɔli kan.

Fɛn wɛrɛw bɛ se ka kɛ ka ɲɛsin Sliding Glass Room Dividers ma

Laadalabato Solid Sliding Doors

Da gɛlɛnw minnu bɛ se ka wuli, olu bɛ mɔgɔ dogoyɔrɔ dafalen di ani ka fɛnw tanga minnu ka fisa ni tɔw bɛɛ ye. U bɛ mankan, yeelen ani yecogo jɛɲɔgɔnya bali pewu. Dutigi caman b’a fɛ ka nin faranfasi bɛɛ lajɛlen in kɛ sugolanw, birow ani sanuyasow ye.

Lɔgɔda minnu bɛ wuli, olu bɛ na ni funteni ye min bɛ sɔrɔ u yɛrɛ la ani ka laadalakow diyabɔ. U bɛ dugukoloko, bololabaarakɛlaw ani foro so dilancogo dafa cogo dafalen na. Lɔgɔ da ɲumanw bɛ se ka mɛn san tan caman kɔnɔ ni u ladonna ka ɲɛ.

Lɔgɔ Da Sugandili:

Da minnu bɛ kɛ ɲɔgɔn fɛ, olu bɛ jiriw ni fɛn dilannenw fara ɲɔgɔn kan. U bɛ se ka ji, fɛn tigɛli ani fɛnɲɛnamaw ka tiɲɛni kɛlɛ ka ɲɛ ka tɛmɛ jiri gɛlɛnw kan. Ladonni wajibiyalenw ka dɔgɔ kosɛbɛ.

Nafa minnu bɛ sɔrɔ mɔgɔ dogolenw ni insulasi la:

• Mankan balili dafalen sow ni ɲɔgɔn cɛ

• Zero visual connection ni a datugulen don

• Funteni hakɛ kɔlɔsili ka fisa ni gilasi ye

• Lakanali bonyalen don ni i y’a suma ni galasi pannew ye

  
  

Jateminɛ minnu ka kan ka kɛ dilancogo la:

• Barn da cogoyaw ka ɲɛsin rustic appeal ma

• Panɛli dilanni minnu bɛ kɛ laadala ɲɛnajɛw kama

• Flush surfaces ka ɲɛsin bi ɲɛnajɛko ma

• Custom staining ani painting sugandiliw

Da gɛlɛnw bɛ baara kɛ ka ɲɛ ni farali dafalen de ye laɲini fɔlɔ ye. U ka ɲi kosɛbɛ sugolanw, so birow ani kunnafonidilaw ka so. Yeelen bolicogo bɛ datugu pewu ni daaw datugulen don.

Da minnu bɛ se ka da ani minnu bɛ se ka kɛ ni Accordion ye

Foli fɛɛrɛw bɛ da belebelebaw dilan k’a sɔrɔ u bɛ baara kɛ ni yɔrɔ fitinin ye ni u dabɔra. Panɛriw bɛ segin kɔ i n’a fɔ accordéon ka kogo kelen kan. U dafalen don da belebelebaw kama yɔrɔ minnu na da sɔgɔlenw tɛna kɛ fɛn ye min tɛ se ka kɛ.

Yɔrɔ-kɔlɔsili sangali:

Fɛn minnu bɛ sugandi, olu bɛ daminɛ vinyl nɔgɔman na ka taa a bila jiri gɛlɛn gɛlɛnw na. Fɛn kelen-kelen bɛɛ bɛ muɲuli ni cɛɲi cogoya wɛrɛw di. Sɔngɔ bɛ danfaraba don fɛnw sugandili ni ɲɔgɔn cɛ.

Fɛn minnu bɛ se ka sugandi:

• Vinyl - A ka nɔgɔn, a sɔngɔ ka nɔgɔn, a cogoya danma

• Lɔgɔ finimugu - Natural look, musaka bɛ se ka kɛ

• Lɔgɔ gɛlɛn - Premium yecogo, musaka ka bon

• Composite - A bɛ mɛn, a bɛ se ka ji sɔrɔ

Da folikɛlan Pros:

• Da wulicogo camanba

• A marayɔrɔ fitinin ni a dabɔra

• Fɛn suguya caman bɛ sɔrɔ yen

• A bɛ se ka da wulilenw minɛ minnu ka bon kosɛbɛ

Da min bɛ se ka pli: Cons:

• Hardware systems gɛlɛnw

• Ladonni yɔrɔw ka ca ka tɛmɛ da sɔgɔlenw kan

• Panɛriw bɛ se ka sɛgɛn waati tɛmɛnen kɔfɛ

• Baarakɛcogo bɛ cɛsiri caman de wajibiya

Muɲuli bɛ bɔ kosɛbɛ fɛnɲɛnamafagalanw jogo la. Folikɛcogo minnu sɔngɔ man gɛlɛn, olu bɛ dɛsɛ joona ni baara kɛra ni u ye tuma bɛɛ. Sisitɛmu premium minnu bɛ ni sira ɲumanw ni charnières ye, olu bɛ mɛn kosɛbɛ.

Rido ni finiw ka so tilayɔrɔw

Fini tila-tilayɔrɔw bɛ fɛn laban di fɛn caman ma minnu bɛ se ka wuli ka bɔ u nɔ na ani minnu bɛ se ka kɛ fɛn ye. U bɛ sigi joona wa u bɛ se ka wuli walima ka bɔ nɔgɔya la. Kulɛriw, misaliw ani fɛn dilannenw bɛ dilancogo seko danma di.

Waati dɔɔnin furakɛli nafaw:

• A man kan ka sigi sen kan kudayi

• A ka nɔgɔn ka Changer ni decor updates ye

• Musow ka musaka fitinin ni i y’a suma ni tilayɔrɔ gɛlɛnw ye

• Jagokɛlaw bɛ se ka baara kɛ ni sotigi ka yamaruya tɛ

  
  

Nafa minnu bɛ musaka bɔ:

Fini sugandili minnu bɛ fɔ kosɛbɛ:

• Kanpaɲi girinmanw walasa ka mɔgɔ dogoyɔrɔ caman sɔrɔ

• Fini jɛlenw walasa ka yeelen filɛ

• Fɛn minnu bɛ kɛ ka dibi don pewu walasa ka dibi don pewu

• Masiricogo misaliw walasa ka ɲɛnajɛ diya

Dan minnu bɛ ɲɛnajɛko la:

• Mankan balili seko danma

• Fini bɛ se ka buguri ni kasaw lajɛ

• A bɛ se ka kɛ i n’a fɔ a bɛ kɛ waati dɔɔnin kɔnɔ walima a ma ban

• Fɔɲɔ ni fiɲɛ bɛ kɛ sababu ye ka lamaga

Danyɔrɔ minnu bɛ se ka kɛ:

• Dɛmɛ walima lakana sigicogo tɛ yen

• Saniya gɛlɛyaw ni panɛri belebelebaw ye

• Tasuma lakanani haminankow ni fɛn dɔw ye

• So kɔnɔfɛnw tiɲɛni bɛ se ka kɛ ka bɔ nɛgɛw la

U bɛ baara kɛ ka ɲɛ waati dɔɔnin magow kama walima porozɛ minnu bɛ kɛ ni baarakɛnafolo ye. Studio sow ni jatebɔyɔrɔw bɛ nafa sɔrɔ u ka fɛn caman sɛgɛsɛgɛli la. Nka, u tɛ se ka bɛn tilayɔrɔ jɔnjɔnw ma walasa ka u yɛrɛ dogo walima ka u muɲu.

So tila-tilacogo ɲɛnabɔcogo minnu bɛ don a kɔnɔ

Kogo tilancɛ minnu bɛ ni galasi sanfɛla ye, olu bɛ danbe sabatilen ni yeelen cicogo fara ɲɔgɔn kan. Jiginni yɔrɔ bɛ yecogo bali ka sɔrɔ sanfɛla galasi bɛ da wulilen mara. U ka ɲi kosɛbɛ dumunikɛyɔrɔ-ka-dumunikɛyɔrɔ jiginni na.

Kogo tilancɛ labɛncogo:

Gafebon tila-tilalanw bɛ fɛnw marayɔrɔ di k’a sɔrɔ u bɛ yɔrɔw fara ɲɔgɔn kan. U bɛ so tilacogo baarakɛtaw Dabɔ k’a sɔrɔ u ma yeelen walima yecogo bali pewu. Gafew ni finiw bɛ mɔgɔya fara yɔrɔ kan.

Storage Divider Nafa minnu bɛ sɔrɔ:

• Baarakɛcogo fila i n’a fɔ marayɔrɔ ni faranfasi

• Labɛn minnu bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye

• A ka nɔgɔn ka fɛn dɔw sɛmɛntiya waati tɛmɛnen kɔfɛ

• A sɔngɔ man gɛlɛn ka tɛmɛ kogo gɛlɛnw kan

  
  

Gafebon tila-tilacogo sugandilenw:

• Dugukolo ka taa sanfɛ walasa ka fɛnw mara cogo caman na

• Counter-height ka ɲɛsin faranfasi yɔrɔ dɔw ma

• Etajɛriw minnu bɛ panpan walasa ka bi mɔgɔw ɲɛnajɛ

• Unit minnu bɛ don a kɔnɔ walasa ka furakɛli banbaliw sɔrɔ

  
  

Sugandili banbali vs waati dɔɔnin:

Design Integration jateminɛw:

• Aw bɛ fɛn minnu bɛ yen, olu bɛ bɛn fɛn dilannenw ma minnu bɛ yen

• Aw bɛ sanfɛla janya hakɛw jateminɛ

• Aw ye labɛn kɛ kuran ni yeelenko magow kama

• Aw bɛ jɛkafɔ kɛ ni duguma fɛnw jiginni ye

Fɛnɲɛnɛmako banbaliw bɛ nafolo nafa caman fara u kan. U bɛ don ɲɔgɔn na ni fɛn dilanni kɔrɔw ye cogo la min tɛ fɛn tiɲɛ. Nka, u bɛ labɛnni ni wari bilali caman wajibiya ka tɛmɛ waati dɔɔnin fɛɛrɛ wɛrɛw kan.

Tuma min na i ka kan ka furaw sugandi minnu bɛ don a kɔnɔ:

• Sotigiya bolodalenw minnu bɛ kɛ waati jan kɔnɔ

• Nege min bɛ fɛn marayɔrɔ jɛlen na

• Mako bɛ tilali barikama na, min bɛ to senna

• Budget bɛ sira di ka kɛɲɛ ni mɔgɔw sago jɔli ye

  
  

Ka desizɔn ɲuman ta: Yala Glass Sliding Room Divider bɛnnen don i ma wa?

I ka yɔrɔ ni i magow jateminɛni

So bonya de b’a jira ni galasi da minnu bɛ wuli, olu bɛ se ka kɛ. Yɔrɔ misɛnninw bɛ nafa caman sɔrɔ u dilanni na min bɛ yɔrɔ lakana. N’a sɔrɔ sobaw mago tɛ yɔrɔ nafama na, u bɛ min di.

Aw bɛ aw ka kogo yɔrɔ sɔrɔlenw suman ka ɲɛ. Panɛli minnu bɛ wuli, olu mago bɛ yɔrɔ la u bɛ taa yɔrɔ min na ni u dabɔra. Jatebɔ kɛ stacking yɔrɔ la min ka kan ka kɛ i ka sistɛmu suguya sugandilen na.

So bonya bɛnnen:

Layidu tacogo jateminɛw bɛ tɛmɛ sumanikɛlan nɔgɔmanw kan. Jagokɛlaw ka taamacogo bɛ nɔ bila da bilali la kosɛbɛ. Mɔgɔw ​​bɛ taa i ka yɔrɔ la cogo min na don o don, i k’o jateminɛ.

Layidu ta fan minnu ka kan ka jateminɛ:

• Siraba sira fɔlɔw sow ni ɲɔgɔn cɛ

• Mebɛriw bilali ni daaw dabɔra/da datugulen don

• Yeelen sɔrɔyɔrɔw dabɔlenw ni u jɛnsɛnni

• HVAC fiɲɛbɔyɔrɔw ni segin yɔrɔw

Denbaya ka ɲɛnamaya kɛcogo de b’a jira i bɛna baara kɛ ni daaw ye siɲɛ joli. Du minnu bolo degunnen don, denw bɛ minnu kɔnɔ, olu mago bɛ fura wɛrɛw la ka tɛmɛ furuɲɔgɔnma dususumaninw kan. Miiri i ka don o don kow la ni tiɲɛ ye.

Baarakɛcogo misali Ɲininkaliw:

• I bɛna u da wuli ani k’u datugu siɲɛ joli?

• Yala aw mago bɛ sɔrɔli teliya la walima aw mago bɛ farali la ni laɲini ye wa?

• Yala denmisɛnw bɛna baara kɛ ni daaw ye tuma bɛɛ wa?

• Yala sokɔnɔbaganw bɛ yen minnu bɛ se ka nɔ bila da baara la wa?

  
  

Waati cogoya jateminɛ :

Kuwati baarakɛcogo fɔlɔw bɛ danfaraba don yɔrɔw la. Woroduguyanfan waatiw bɛ sinsin funteni nafa kan. Saheli yɔrɔw bɛ u sinsin nɛnɛ musakaw kan. Aw ka utilité faturaw bɛ o kow jira minnu ka kan ka bila jɔyɔrɔ fɔlɔ la.

Budjet ni waati bolodacogo

Porozɛ musaka bɛɛ lajɛlen tɛ dan da sigicogo dɔrɔn ma. A sigili, fɛn caman sɛmɛntiyacogo, ani gɛlɛya minnu ma labɛn, olu bɛ musakabaw fara u kan. Aw ye labɛn kɛ walasa ka musaka tɛmɛnenw kɛ 20-30%.

Musow ka musaka jateminɛ bɛɛjɛfanga:

Budjet bolodacogo ka kɛɲɛ ni poroze hakɛ ye:

• Porozɛ fitinin ($2000-3500) - Panɛli kelen, sigili sariyalen

• Porozɛ cɛmancɛ ($3.500-6.000) - Sistɛmu fila-fila, fɛn misɛnninw b’a la

• Porozɛba ($6.000-10.000+) - Panɛli caman, sigicogo caman yeli

A sigili waatibolodalenw bɛ bɔ sistɛmu ka gɛlɛya la ani baarakɛlaw ka sɔrɔ la. Porozɛ nɔgɔmanw bɛ ban tile 1-2 kɔnɔ. Siginiden gɛlɛnw bɛ se ka dɔgɔkun kelen walima ka tɛmɛ o kan.

Waatibolodacogo jigiyaw:

Nafolo sɔrɔcogo minnu bɛ se ka sɔrɔ:

• So ɲɛnabɔli juruw (5-15% tɔnɔ) .

• Karti minnu bɛ kɛ ni fɛnw laseli ye

• Baarakɛlaw ka wariko porogaramuw

• So ka bolomafaraw ka juruw (hakɛ minnu ka dɔgɔn) .

Waati waati bɛ nɔ bila musaka ni sɔrɔli bɛɛ la. Samiya ni samiyɛ ye waatiw ye minnu ka ca kosɛbɛ baarakɛlaw fɛ. Tuma caman na, tilebin ni fonɛnɛ bɛ sɔngɔ ni sɔrɔli ɲuman di.

Ɲininkali minnu ka kan ka kɛ sani i ka ko latigɛ

Desizɔn nafamaw sɛgɛsɛgɛli sɛbɛn:

Baarakɛlaw ka ladilikanw:

• Structural engineer min bɛ doni-ta-kogo caman sɛmɛntiya

• So kɔnɔna dilanbaga ka ɲɛsin ɲɛnajɛko jɛ-ka-baara ma

• Enerji ladilikɛla min bɛ baara kɛcogo ɲuman ɲɛnabɔ

• Baarakɛla min bɛ musaka jateminɛ tigitigi

Ɲininkali minnu bɛ kɛ Ladilikɛla ŋanaw fɛ:

• Yɛlɛma jumɛnw ka kan ka kɛ sigida jɔcogo la?

• O bɛna nɔ jumɛn bila ne ka so fanga dɔgɔyali la?

• Waati bolodacogo lakika ye mun ye walasa ka baara kɛ ka ban?

• Ladonni jumɛn bɛna kɛ waati jan kɔnɔ?

Kɔrɔbɔli ni kɔrɔbɔli cogoyaw:

• Aw ye taa jiralikɛnɛw la walasa ka sistɛmu suguya wɛrɛw baara

• Aw ka taa so jirali la walasa ka bololabaara kɛcogo dɔn

• Aw ye sigiɲɔgɔnw ɲininka u ka ko kɛlenw na

• Sɛgɛsɛgɛli kɛ ɛntɛrinɛti kan seginnkanniw ni baarakɛlaw ka hakilinaw kan

Darapo bilenman minnu bɛ hakilina di ka jateminɛ kɛ kokura:

• Yɛlɛma donna sigida la, o bɛ tɛmɛ da musaka 50% kan

• Kuwati baarakɛcogo ɲuman ye i ka ɲɛtaa kunba ye

• Aw mago bɛ mankanw danfara dafalen na

• Budget (budget) ka gɛlɛn kosɛbɛ

Yeelen wuluwuluw walasa ka taa ɲɛfɛ:

• Yɔrɔ marali ye i ka laɲini fɔlɔ ye

• I bɛ yeelen dabɔlen ni da wulilen nafa bonya

• So baarakɛcogo min bɛ se ka wuli ka bɔ a nɔ na, ​​o bɛ diya i ye

• Budget bɛ se ka sigicogo ɲuman minɛ

Desizɔn laban hukumu:

Desizɔn waatibolodacogo Ladilikan:

• Dɔgɔkun fɔlɔ : Yɔrɔ jateminɛni ni magow jateminɛni dafalen

• Dɔgɔkun 2nan: Aw ye baarakɛlaw ka ladilikanw ni jateminɛw sɔrɔ

• Dɔgɔkun 3nan: Aw ye sugandiliw suma ɲɔgɔn na ani ka desizɔn laban ta

• Dɔgɔkun 4nan: A daminɛ ka komandi kɛ ani ka poroze boloda

Kuncɛli

Glasi da so tilalanw bɛ nafa ɲumanw di yɔrɔ lakanani na ani yeelen bɔli dafalen na. U bɛ yɔrɔw dilan minnu bɛ se ka wuli ka bɔ u nɔ na, ​​minnu bɛ se ka kɛ bi ta ye, minnu dafalen don ɲɛnamaya dafalen kɔnɔ. Nka, u mago bɛ ladonni caman na, u bɛ dan sigi u dan na, wa u bɛ se ka dɔ fara fanga musakaw kan.

U bɛ baara kɛ ka ɲɛ dutigiw ye minnu bɛ yɔrɔ baaracogo ɲuman ni ɲɛnajɛko ɲɛnabɔcogo bila jɔyɔrɔ fɔlɔ la. Aw bɛ aw yɛrɛ tanga u ma ni mankan bɔli dafalen walima fanga dɔgɔyali hakɛ cayalenba nafa ka bon.

Yala i labɛnnen don k’i ka sugandiliw sɛgɛsɛgɛ wa? Aw bɛ a daminɛ ni aw ka yɔrɔ sumani ye ani ka aw mago kɛrɛnkɛrɛnnenw jateminɛ. Aw bɛ se ka sigida baarakɛlaw ɲininka walasa ka jateminɛ lakikaw ni sigicogo jateminɛw sɔrɔ.

Aw ye fɛɛrɛ tigɛ bi - lajɛw boloda ni fɛnw sigibagaw ye minnu bɛ se kosɛbɛ walasa k’a dɔn ni gilasi so tilalenw bɛ bɛn aw ka so ni aw ka ɲɛnamaya kɛcogo ma.

Ɲininkaliw Ɲininkaliw Dakun

J: Glass sliding room dividers musaka ye joli ye?

A: Musakaw bɛ daminɛ dɔrɔmɛ 800-2000 na pankurun kelen sigicogo jɔnjɔnw na ka se dɔrɔmɛ 3000-6000 ma pankurun caman sigicogo ɲumanw na. Installation bɛ $500-2000 fara a kan ka kɛɲɛ ni gɛlɛya ye. A ka c’a la, poroze musakaw bɛɛ bɛ daminɛ dɔrɔmɛ 1300-8500 na minnu sigilen don. Fɛn minnu bɛ nɔ bila sɔngɔ la, olu ye sistɛmu hakɛ ye, gilasi suguya, karamɔgɔya fɛnw, ani a sigicogo wajibiyalenw. Ladamuni hakɛw ani fɛn ɲumanw i n’a fɔ smart glass bɛ dɔ fara musakaw kan kosɛbɛ.

J: Yala gilasi da minnu bɛ wuli, olu bɛ se ka mɔgɔ dogoyɔrɔ bɛnnen di wa?

A: Glass jɛlen tɛ ɲɛnayeli gundo di nka a bɛ yeelen bolicogo mara. Glasi frosted bɛ mɔgɔ dogoyɔrɔ ɲuman di ka sɔrɔ a bɛ sira di yeelen ma. Glass textured bɛ danbe yɔrɔ dɔ di ni decorative appeal ye. Smart glass bɛ wuli ka bɔ jɛlen na ka taa opaque la ɛntɛrinɛti fɛ nka a musaka ka ca kosɛbɛ. Mankan danbe dan ye ni i y’a suma ni kogo gɛlɛnw ye, o b’a to u man ɲi kosɛbɛ mankanko la.

J: Yala sliding glass room dividers bɛ fanga dɔgɔya wa?

A: Glass panneau belebelebaw fanga bɛ bɔnɛ ka tɛmɛ kogow kan minnu bɛ insulasi. Glass standard bɛ se ka dɔ fara funteni/nɛnɛ musakaw kan ni 10-25% ye ka kɛɲɛ ni waati cogoya ye. Low-E double-pane glass bɛ baarakɛcogo ɲɛ nka hali bi a tɛ se ka bɛn kogo solide insulation ma. Sugandili minnu bɛ fanga dɔgɔya, olu ye Low-E finiw ye, gilasi fila/saba, ani waati cogoya bɛnnen. U tɛ baara kɛ kosɛbɛ waati gɛlɛnw na minnu bɛ funteni walima nɛnɛba de wajibiya.

J: Glasi da sɔgɔlenw bɛ mɛn waati joli kɔnɔ?

A: Jogoɲumanya siratigɛw bɛ san 20+ kɛ ni ladonni ɲuman ye. Sisitɛmu minnu sɔngɔ man gɛlɛn, olu bɛ se ka kɛ sababu ye ka fɛn wɛrɛw bila u nɔ na san 5-10 kɔnɔ. Muɲuli bɛ bɔ fɛnɲɛnamafagalanw cogoya la, u sigicogo tigitigi la, ani u ladoncogo kɛcogo la. Sisitɛmu premium minnu bɛ ni tracks ni rollers ɲumanw ye, olu bɛ mɛn ka tɛmɛ tɔw bɛɛ kan. Ladonni tuma bɛɛ i n’a fɔ saniya, tulu, ani ladilanni, o bɛ ɲɛnamaya janya kosɛbɛ. Baarakɛlaw ka san o san tune-ups bɛ dɛmɛ ka dilanbaw bali.

J: Yala ne yɛrɛ bɛ se ka gilasi sɔgɔlenw sigi so tilayɔrɔw la wa?

A: Panɛli kelen-kelen sigicogo nɔgɔmanw bɛ se ka kɛ DIY-friendly ye sotigiw fɛ minnu bɛ se kosɛbɛ. Panɛli caman, bɔrɔ da, walima sistɛmu minnu ka kan ka fɛn dɔw sɛmɛntiya u jɔcogo la, olu mago bɛ baarakɛlaw ka sigili la. DIY bɛ baarakɛminɛn kɛrɛnkɛrɛnnenw de wajibiya, sumanikɛcogo tigitigiw, ani sow jɔcogo sariyaw faamuyali. A ka c’a la, baarakɛlaw ka sigili bɛ kɛ dɔrɔmɛ 500-1500 ye nka garanti bɛ sɔrɔ a la ani a bɛ tali kɛ ɲɔgɔn na cogo bɛnnen na. Misaliw bɛ se ka kɛ sɔngɔba ye ani ka nɔ bila baara kɛcogo ɲuman na.

J: Ladonni jumɛn ka kan ka kɛ gilasi da sɔgɔlenw na?

A: Dɔgɔkun o dɔgɔkun sira saniya ani dɔgɔkun fila galasi saniya, o nafa ka bon. Aw bɛ tulu kɛ wuluwuluw la kalo 3-6 o kalo 3-6. San o san, baarakɛlaw ka tune-ups bɛ $150-300 bɔ. Aw bɛ waati cogoyaw lajɛ ani ka u falen ni u donna. Aw bɛ siraw saniya ni fɛnɲɛnamafagalan ni fini ɲiginnen ye. Aw bɛ gilasi saniyacogo ɲumanw kɛ walasa ka aw tanga jiriw ma. Baarakɛlaw ka ladonni bɛ gɛlɛyaw minɛ joona ani ka sistɛmu ɲɛnamaya janya kosɛbɛ.

J: Yala gilasi so tila-tilalanw bɛ dɔ fara so nafa kan wa?

A: Ɔwɔ, a ka c’a la, sigida ɲumanw bɛ musaka 60-80% sɔrɔ nafolo nafa bonyalen na. Bi sannikɛlaw nafa ka bon kosɛbɛ yɔrɔw la minnu bɛ se ka wuli ka bɔ u nɔ na, ​​yɔrɔ minnu falen bɛ yeelen na. U bɛ mɔgɔ ɲɛnajɛ kɛrɛnkɛrɛnnenya la dugukolofeere suguw la minnu bɛ ɲɔgɔn sɔrɔ. So minnu bɛ ni galasi kɛcogo ɲuman ye, tuma caman na, olu bɛ feere joona. Sugandili minnu bɛ fanga dɔgɔya, olu bɛ diya sannikɛlaw ye minnu bɛ sigida lakana. Bi cɛɲi bɛ jamanaden fitininw sama ka ɲɛnamaya yɔrɔ dafalenw bila jɔyɔrɔ fɔlɔ la, minnu bɛ se ka ladamu.

J: Glass sugandicogo ɲumanw ye jumɛnw ye so tilayɔrɔw la?

A: Glass jɛlen bɛ yeelen bɔli ni ɲɛnayeli jɛɲɔgɔnya caya. Glass frosted bɛ mɔgɔ dogoyɔrɔ di ka sɔrɔ ka yeelen bolicogo mara. Glass min ka dɔgɔn E bɛ fanga sɔrɔcogo ɲɛ waati gɛlɛnw na. Lakanali galasi tempered de wajibiyalen don sigili fanba la. Glass textured bɛ decorative appeal di ni danbe yɔrɔ dɔ ye. Smart glass bɛ fɛn laban di nka a musaka ka ca ni 200-300% ye ka tɛmɛ sugandili jɔnjɔnw kan.