DERCHI atanga glass hmanga siam, tunlai double front door te hi sumdawnna leh chenna in project sang tak tak tan custom aluminum pivot entry system a ni. W-Z3 hian thermally broken profile te chu argon-filled insulating glass leh concealed rotation mechanism nen a pair a, U-Factor 0.38 a nei a, sightlines a thianghlim bawk. Project-te hian sizing bik, glazing upgrade, leh finish coordination an mamawh a—DERCHI hian order tin chu performance documentation awmsa nen spec-ah a siam thin.
- 0.38 U-Factor a ni a, 8 mm+21A+8 mm argon-a khat tempered glass a awm bawk
- Hidden pivot hardware hian glass panel lian tak tak leh opening movement mawi tak a support a ni
- Full customization: dimension, Low-E, tinted emaw laminated glass, PVDF rawng, rotation axis awmna
- Factory-a thlawp B2B support, compliance certificate, dealer hmanrua, leh technical data te nen
Product Details te chu a hnuaia mi ang hian a ni
DERCHI hian tunlai double front door glass nei a siam hi thermally broken aluminum frame (3.0 mm leaf profile, 2.5 mm frame, 129 mm frame depth) atanga tan a ni. Standard insulated unit hian 21 mm argon-filled cavity vel ah 8 mm tempered lites pahnih a sandwich a, PVDF spacer dum hmangin thermal transmittance a titawp a ni. Integrated pivot bearing hian kawngkhar rit chu hmuh theih lohvin a phur a, hinge emaw track emaw lang lovin load a sem darh a ni.
Side-hung door nena khaikhin chuan pivot setup hian hnah zau zawk, sang zawk a phal a, lobby layout emaw residential entry nena inmil turin centered emaw offset emaw a ni thei bawk. 45-degree injected corner joint leh EPDM multi-layer seal te hian boruak leakage chu 1.2 m3/(m·h) thlengin a vawng reng a, tui luh pawh 700 Pa thleng a do thei bawk. Kawngkhar tin hi project measurement atana siam a nih avangin structural feasibility—a bik takin maximum leaf size leh wind-load documentation—chu factory nen finfiah tur a ni.
Product Features te pawh a awm
Thermal-break profile: 3.0 mm leaf leh 2.5 mm frame insulating polyamide strip nei hian heat transfer a ti tlem a, structural bulk dah belh lovin energy code zawm turin a pui a ni.
Argon-filled double glazing: 8 mm+21A+8 mm tempered unit argon fill nei hian U-Factor 0.38 leh SHGC 0.22 a tihlawhtling a, entryway-a ni êng leh ni control a inthlau hle.
Hidden rotation hardware: Pivot assembly hian glass hnah rit tak takte chu awlsam takin a support a, architect-te chu hinge emaw floor springs hmuh theih lohvin flush facade design turin a phalsak a ni.
Multi-layer EPDM sealing: Compressible gasket pathum bakah injection-molded corner seal te hian exposed entrance-ah air tightness 1.2 m3/(m·h) leh water tightness 700 Pa a pe a ni.
45-degree corner injection: Mechanically reinforced corners hian frame geometry a lock a, kum tam tak a thawh hnuah gasket alignment a vawng reng bawk.
Project-driven sizing: Custom width, height, leh double-door pairing te chu structural capacity atan enfiah a ni a; buyers te chuan DERCHI hmangin pivot ratings leh maximum panel weights te chu an confirm thei a ni.
Style hrang hrang siam theih a ni
Glazing duhthlan tur: Double glazing chiang tak aiin, himna, mimal nun leh ni zung hmanga thil tum tihhlawhtlin nan Low-E coatings, tinted, laminated safety, emaw bullet-resistant glass emaw thlang rawh.
Frame finish: PVDF custom colors—anodized looks, metallic emaw solid emaw—building hmalam nen a inmil chiah.
Dimensions leh configuration: Leaf width, height, leh double-door pairing te chu i hawnna thlengin siam a ni a; DERCHI hian production hmain feasibility a nemnghet a, a bik takin oversized panels tan chuan.
Rotation axis leh swing: Center emaw eccentric emawa dah; inward emaw outward emawa hnathawh hian traffic flow leh architectural constraints a zirin a insiamrem thin.
Hardware integration: Handle style, lock, leh access control interface te chu DERCHI nen sawiho a ni a; pivot system hian technical review hnuah electric strike emaw maglock emaw nen a coordinate thei a ni.
Hardware Accessories te pawh a awm bawk
Custom pivot system: W-Z3-a hidden rotation unit hian kawngkhar rit chu floor leh top bearing point hrang hrangah a sem darh a, hei hian glass hnah rit tak takte chu floor springs emaw side hinge emaw awm lovin a kal thei a ni.
Guangqi integrated armrest handle: Stile-a vertical pull dah chhunzawm zel chuan ergonomic grip leh profile mawi tak, tunlai tak a pe a ni.
45° corner injection: Joint te hi mechanically fastened leh sealed a ni a, hei hian rigid, weather-tight connection siamin racking a do thei a ni.
EPDM gaskets: Inner, middle leh outer seal te hian thermal movement an handle a, chutih rualin boruak, tui leh sound barrier te tan compression an vawng reng bawk.
Optional locking leh access control: Multi-point lock, panic bar, emaw electric release te chu inzawmkhawm theih a ni a; project tinah compatibility a confirm tur a ni.
Parameter bulpui ber berte
Performance Item a ni | Thu hriat tur awmsa | Buyer Notes te pawh a awm |
|---|---|---|
Thermal Insulation hmanga siam a ni | U-Factor 0.38 (standard glass) a ni a, a man pawh a tlawm hle. | Glazing dik tak chu performance verification dil rawh; energy code documentation atan a pawimawh hle. |
Thli Pressure Resistance a ni | 5 kPa a ni | Project thli load nen a inmil lo tih finfiah; high-rise emaw extreme wind zone-ah chuan engineering review dang a ngai thei bawk. |
Tui Tightness a awm | 700 Pa | Local storm-water mamawh dan enfiah la, exposed entry te tan sill detailing dik tak enfiah rawh. |
Air Tightness a awm | 1.2 m3/(m·h) a ni. | Test standard (EN emaw ASTM) verify la, configuration thlan tawh atan certified documentation dil rawh. |
Sound Insulation a awm bawk | 35 dB a ni | Lab test details leh kawngpui lam hawi hmuna double-door pair-a hman theih dan tur nemnghet. |
Product chungchang chi hrang hrang
Thil | Hrilhfiahna |
|---|---|
Product Hming | DERCHI W-Z3 Tunlai Double Front Kawngkhar Glass nei |
Product chi hrang hrang | Aluminium glass pivot hmanga luhna kawngkhar; custom double door project system hmanga siam a ni |
Bungrua | Aluminium thermal-break profile (a hnah: 3.0 mm, frame: 2.5 mm) a ni. |
Glass chi hrang hrang | 8 mm tempered + 21A argon-a khat cavity + 8 mm tempered a ni a; duhthlan tur Low-E, laminated, tinted, bullet-resistant a ni |
Frame zau zawng | 129 mm a ni |
Hardware hmanga siam a ni | A rilru a buai em em a, a rilru a hah em em bawk a; Guangqi integrated armrest handle a ni a, a man pawh a to hle |
Opening Style a ni | Pivot (center emaw eccentric emaw); dilna angin chhung lam emaw pawn lam emaw swing |
Size Range a ni | Project pakhatah custom tih ang chi; maximum panel size leh weight chu supplier hnenah confirm tur a ni |
Dilna | Commercial lobby, residential villa, apartment luhna, retail storefront, office building te a awm bawk |
Customization hmanga siam a ni | Glass, PVDF rawng finish, pivot position, hardware integration, dimension te a awm bawk |
Notes te chu | Standard configuration hmanga value siamte; certification leh supporting document te a awm bawk. Warranty, packaging, leh lead time te chu RFQ ah confirm rawh. |
A thatna te
Energy performance finfiah: U-Factor 0.38 leh SHGC 0.22 tihchhuah te hian project te chu energy target an thlen theih nan a pui a; i glass-frame assembly bik atan third-party data dil rawh.
Clean pivot aesthetic: Hidden rotation hardware hian bulky hinge a ti bo a, architect te chu flush, glass-heavy entry atan design zalenna a pe a ni.
Durable weather sealing: Multi-layer EPDM gasket leh injection-bonded corner te hian hun kal zelah boruak leh tui a tikhawlo a, enkawlna a ti tlem a ni.
Tailored appearance: PVDF custom colors, glass chi hrang hrang, leh integrated handles te hian kawngkhar chu facade material eng pawh nen a inmil thei.
Factory-scale support: Sqm 70,000, staff 600+, leh dealer program (showroom design, 3D rendering) neiin DERCHI hian order lian emaw repeat emaw rintlak takin a back thei a ni.
A hman dan tur Scenario hrang hrang
Apartment: Chhungkaw tam tak awmna lobby-ah chuan double glass pivot door hian luhna êng, lawmawm tak a siam a, thermal break hian energy senso a enkawl thung.
Home Office: Live-work space atan chuan pivot door-a professional street presence leh quiet operation hian client-te a ti lawm a, substantial takin a inhria.
Hotel: Grand lobby atanga suite entry thlengin W-Z3-a hidden pivot leh custom finish te hi hotel branding nen a inmil a, acoustic leh thermal performance-in a thlawp a ni.
Office Building: Corporate lobby-te chuan ni êng leh langtlang tak an nei a, double pivot door an nei a; air-locked vestibules-ah an tel thei bawk.
Outdoor: Covered outdoor entries tan chuan tui tightness, thli laka invenna, leh climate atana PVDF durability te chu i sawi hmain confirm hmasa phawt ang che.
Residential Building: Townhouse emaw, low-rise complex emaw-ah chuan main door mawi tak, chhe thei lo tak an hmu a; insulated glass hian facade efficiency zawng zawngah a pui a ni.
Pawn lam: Pawn lam element angin sill detail leh drainage dik tak a pawimawh a; pressure ratings leh gasket local code nena inmil leh mil loh enfiah.
Villa: Luxury residence-ah hian full-height glass entry dramatic tak tak a awm thei a, tlang emaw tuipui kam emaw thlir theihna tur energy ratings a vawng reng thei bawk.
FAQ
Tunlai khawvel hmalam kawngkhar pahnih glass nei te hi eng nge ni?
Custom aluminum pivot entry door an ni a, a tlangpuiin double-leaf configuration-ah argon-filled insulating glass leh hidden pivot hardware hmanga siam an ni. DERCHI hian W-Z3 hi sumdawnna leh chenna in sang tak tak facade atan siam a ni.
Khawiah nge heng kawngkharte hi hman theih ang?
Hotel, office building luhna, luxury villa, apartment lobby, retail storefront—khawi hmunah pawh thermal performance nei grand, glass-heavy double door a ngai a ni.
Kawngkhar hi a duh angin a siam theih em?
Awle. Glass type, frame color (PVDF), pivot axis position, dimension, leh hardware te hi project-a siam vek a ni. DERCHI chuan production hmain feasibility a nemnghet.
Quote siam nan eng information nge mamawh?
Model (W-Z3), quantity, opening size leh weight, glass/finish duh zawng, hardware mamawh, performance target, certification, leh project drawing te.
Heng kawngkharte hi B2B project atan a tha em?
Ngei ngei. DERCHI hian developer, contractor, leh dealer te chu technical documents, mock-ups, leh bulk order te tan a hun taka delivery hmangin a pui thin.
Eng technical document nge awm?
Dilna angin, thermal, thli, tui, boruak, leh acoustics te performance verification; installation drawing, glass data sheet, leh finish sample te a awm bawk.
Buyers ten order an tih hmain eng nge an confirm tur?
W-Z3 tan kawngkhar size/weight sang ber, test standard (EN, ASTM, etc.), warranty terms, leh tuifinriat atanga bungraw phurh a nih chuan packaging te.
Engtin nge certification, packaging, leh shipping te hi an enkawl?
Configuration khatah Certification (CE, NFRC, etc.) dil theih a ni. Kawngkharte chu nghet takin crated-ah dah a ni a; shipping terms (FOB, CIF) chu order confirm hnuah ruahman a ni.
