DERCHI W-Z3 pivot door hian thermal-break aluminum leh double tempered insulating glass te a rawn keng tel a, tunlai glass exterior door system siam a ni a, sumdawnna leh chenna in project lian tham tak tak atan engineer a ni. A concealed pivot hardware hian glass sightlines tihtawp loh a phalsak a, chutih rualin khaw lum leh khaw vawt venna leh energy efficiency mumal tak a pe bawk.
- Thli load resistance rated 5 kPa thleng leh tui tightness 700 Pa (test standards atan factory zawt rawh).
- Argon-filled 8mm+21A+8mm insulating glass hian siamtute tehna U-Factor 0.38 (NFRC report dilna angin a awm) a siam thei a ni.
- Project-a siam theih dimension, glass type, frame finish, leh pivot dahna te.
Product Details te chu a hnuaia mi ang hian a ni
W-Z3 structural core hi 129mm-a zau a ni a, thermal-break aluminium frame a ni. Sash profile-te hi 3.0mm a thuk a ni a, frame-ah chuan 2.5mm aluminum a hmang thung—insulated glass panel lian tak tak, deflection tam lutuk awm lovin phurh theihna tur a tling. Standard glazing hi double tempered insulating unit (8mm+21A+8mm) argon hmanga khat a ni a, hei hian heat transfer a titawp a, kawngka U-Factor 0.38 a support bawk.
Concealed top leh bottom pivot hardware hian kawngkhar rit zawng a phur a, a rotation pawh a awlsam thei hle. Exposed floor track a awm loh avangin a threshold chu a design a nih chuan a flush deuh vek thei a ni. Perimeter sealing hi multi-layer EPDM gasket-ah a innghat a, a corner-te chu 45° injection bonding hmanga inzawm a ni—chu detail chuan assembly-in a water tightness rating 700 Pa a neih theih nan a pui a, air tightness chu 1.2 m3/(m·h) a ni a, sound insulation chu 35 dB a thleng a, mahse lei duhtute chuan testing standard bik hman leh local nena an inmilna chu an nemnghet tur a ni code mamawh a ni.
Product Features te pawh a awm
Pivot Opening: Concealed pivot hardware hian oversize glass panels te chu minimal visible framework neiin a support a, façades te chu upscale residential leh commercial entry te nena inmil line thianghlim, tunlai tak a pe a ni.
Thermal Performance: Argon-a khat insulating glass leh thermal-break frame te hian heat gain/loss tihtlem nan an thawk dun a; U-Factor tehna 0.38 (NFRC report hmanga finfiah tur) hian building HVAC mamawhna tihtlem nan a pui thei a ni.
Frame Sturdiness: Frame zau zawng 129mm leh sash wall 3.0mm a nei a, structure hian bowing a do thei a, pivot movement chu a smooth reng a ni—a hawnna sang leh zau takah pawh.
Weather Sealing: Multi-layer EPDM gasket leh injection-bonded corner te hian tested water tightness 700 Pa a pe a, hmun langsar takah ruah a sur loh nan.
Urban Sound Control: Manufacturer-tested 35 dB sound insulation hian kawngpui ri tihziaawm nan a pui a, hei hi hotel, office leh khawpui chhunga apartment tan chuan a tangkai hle.
Project Customization: Glass type, frame finish, pivot offset, leh dimension te hi architectural drawing nena inmil turin adjustable vek a ni a, chuvangin kawngkhar hi specific performance leh aesthetic briefs nen a inmil vek a ni.
Style hrang hrang siam theih a ni
Glass Configuration: Clear, tinted, reflective, emaw low-E coatings a awm a; factory atanga SHGC leh visible light transmission data dil tur a ni.
Frame Color & Finish: Powder coating, anodizing, emaw wood-grain transfer emaw chu RAL rawng hrang hrangah siam a ni. Sample siam chhuah hmaa phalna lak hmasak phawt a tha.
Pivot Position: Kawngkhar zau zawng leh swing path nena inmil turin center emaw off-center emaw pivot placement thlang la; opening dimension chiang tak leh visual balance a nghawng a ni.
Size Range: Preset maximum a awm lo; opening tin chu project drawing nen structurally review a ni a, safe dimensions hriat theih a ni.
Threshold & Sill Design: Low-profile emaw weather-rated emaw sill option a awm a; quotation process hmasa berah accessibility leh drainage mamawhna chiang taka sawifiah.
Hardware Accessories te pawh a awm bawk
Concealed Pivot System: Top- leh bottom-mounted pivot unit te chu frame leh floor chhungah thup a ni a, hei hian fai taka en theihna a siam a; load capacity chu kawngkhar rit zawngah confirm tur a ni.
Handle/Grab Bar: Guangqi handle emaw model dang emaw tarlan theih a ni a; finish coordinate chu kawngkhar frame leh interior hardware scheme nen a inzawm a ni.
Multi-Point Locking: Lock body leh strike point te hi a duh angin a siam theih a; cylinder upgrades awm thei—ordering neih laiin security mamawh chungchang sawiho.
Bottom Guide/Closer: Controlled closing leh thli laka invenna atan concealed floor guide emaw overhead closer emaw chu inzawmkhawm theih a ni a; factory nen operational mamawhna nemnghet.
EPDM Gaskets: Multi-layer corner-molded gaskets hian hnah pumpui vel chu compression mumal tak a vawng reng a, boruak leh tui ratings a thlawp a ni.
Parameter bulpui ber berte
Performance Item a ni | Thu hriat tur awmsa | Buyer Notes te pawh a awm |
|---|---|---|
Thermal Insulation hmanga siam a ni | U-Factor 0.38 (a siamtute tehna) . | Glass configuration bik atan NFRC emaw a tlukpui test report dil rawh. |
Thli Pressure Resistance a ni | 5 kPa (standard tarlan loh) . | Testing standard (eg, ASTM E330) leh high-rise/hurricane zone-a hman tur a nih leh nih loh nemnghet rawh. |
Tui Tightness a awm | 700 Pa (standard tarlan loh) . | Test method chu verify la, rating chu project exposure conditions a tlin tih finfiah rawh. |
Air Tightness a awm | 1.2 m3/(m·h) (standard tarlan loh) | Test reference dil la, energy code limit nen khaikhin rawh. |
Sound Insulation a awm bawk | 35 dB (standard tarlan loh) . | Khawpui ri tihtlem mamawhna atana testing standard (eg, ISO 140-3) tihchian. |
Product chungchang chi hrang hrang
A sawifiahna | Kimchang |
|---|---|
Product Hming | DERCHI W-Z3 Pivot Kawngkhar |
Product chi hrang hrang | Aluminium pivot kawngkhar a ni |
Frame Material a ni | Thermal-break aluminium, sash 3.0mm, frame 2.5mm, a zau zawng 129mm a ni |
Glass chi hrang hrang | Argon gas hmanga insulating pahnih tempered (8mm+21A+8mm) a awm bawk. |
Hawnna Dan | Horizontal center pivot (off-center duhthusam) a ni. |
Hardware hmanga siam a ni | A chung/hnuai pivot thup, Guangqi handle, lock customizable a awm bawk |
Sealing tih a ni | Multi-layer EPDM gasket, 45° injection-bonded corner hmanga siam a ni |
Size Range a ni | Project bik atana hman tur; no standard maximum – drawing review hmanga tih theih a nih thu a nemnghet |
A rawng/Finish | Powder coat, anodized, thing leh mau transfer; RAL thlan tur chu factory confirmation a awm tur a ni |
Dilna hrang hrang | Sumdawnna kawngkhar, hotel, villa, apartment, office te pawh a awm |
A thatna te
Energy-Saving Thermal Break: Thermal-break frame leh argon-a khat insulating glass hian heat transfer a titawp a, climate zone nena inmil a nih chuan building energy hman a tihtlem phah a ni.
Clean Architectural Pivot: Concealed pivot hian hinge leh floor track hmuh theih te a ti bo a, designer te chuan mechanical clutter awm lovin luhna mawi tak an siam thei a ni.
Extensive Customization: Glass specs, frame color, pivot offset, leh size te hi project atana siam vek a nih avangin kawngkhar hi building envelope danglam tak tak nen a inzawm tlat a ni.
B2B Documentation Support: A siamtu chuan CE, AS2047, NFRC, emaw CSA framework-ah a configure thei a; thil lei laiin certificate hman tur dil rawh.
Experienced Export Production: Kum sawm tam tak chhunga export lama tawnhriat nei Foshan factory lian tak chuan bulk order-a quality control mumal tak a thlawp a ni.
A hman dan tur Scenario hrang hrang
Apartment: Upscale lobby-te chuan ni êng leh inhawngna an nei a; sound insulation hian common-area noise a buffer thei a ni.
Home Office: Pivot entry hian hnathawhna hmun chu hmuh theihin a then a, ni êng leh thermal comfort a vawng reng a ni.
Hotel: Kawngkhar san zawng leh glass siamin atrium effect hmuhnawm tak siam rawh; concealed pivot hian design chu a tithianghlim reng a ni.
Office Building: Thermal-break hmanga lirthei tamna luh hian building envelope chu air tightness leh energy target a tlin theih nan a pui thin.
Pawn lam: Patio/huan chhuahna tur atan chuan thli leh tui rating te chu tualchhung exposure nen enfiah leh la; coastal-grade finish chungchang zawt rawh.
Residential Building: Multi-unit development-ah chuan repeatable fabrication leh configurable sizes hmangin entry design mumal tak a awm a, hei hian hlawkna a nei a ni.
Pawn lam: Primary barrier, multi-point lock leh EPDM seal nei; structural load leh hardware corrosion class te finfiah.
Villa: Large-format pivot door chu focal point a lo ni ta a, interior leh landscape chu clear emaw low-E glass hmangin a blending a, chutih rualin solar gain a enkawl bawk.
FAQ
W-Z3 pivot door hi eng nge ni tak tak?
W-Z3 hi aluminium pivot door a ni a, thermal-break frame leh double tempered insulating glass a awm bawk. Tunlai glass exterior door application atana siam a ni a, opening lian tak tak, energy performance, leh line thianghlim te chu ngaih pawimawh ber a ni.
He kawngkhar hi engtiang chiahin nge customizable a nih?
Element zawng zawng deuhthaw chu siamrem theih a ni: dimension, glass type (clear, tinted, low-E), frame rawng leh finish, pivot position, hardware, leh locking te. Factory chuan i drawing leh performance target te chu a enfiah a, a tih theih dan tur a nemnghet thin.
Quotation dawng tur chuan eng nge ka pek tur?
Rough opening dimensions, door swing direction, pivot preference, glass leh finish mamawh, target performance level, project quantity, leh certification mamawh eng pawh (eg, NFRC, CE) te thehlut tur a ni. Hei hian supplier chu offer dik tak a buatsaih thei a ni.
Performance value hrang hrangte test report a awm em?
Thli load (5 kPa), tui tightness (700 Pa), air tightness (1.2 m3/(m·h)), leh sound insulation (35 dB) te chu siamtute test data a awm a ni. U-Factor (0.38) leh SHGC (0.22) tan chuan i glass configuration bik atan NFRC emaw a tlukpui report dil rawh; hengte hi project khatah a tul hunah siam chhuah a ni.
Order ka siam hmain eng nge ka confirm hmasa tur?
Door weight leh structural feasibility tihfel, test standards local code nena inmil, finish sample approval, lock specification, leh third-party inspection mamawh eng pawh. Tin, contract-a lead time leh warranty terms te pawh chiang takin sawi bawk ang che.
Engtin nge packaging leh shipping hi an enkawl?
Order confirmation neih chhung hian packaging method (palletized, crated, paper-wrapped) te chu tihfel a ni. Trade terms (FOB, CIF, etc.) chu contract-ah hian inremna siam a ni a, thawn chhuah hmain packing list pek a ni bawk.
