If you need a durable aluminum glass door for a tall, wide opening, the 80 Series folding door might be the right product—even if you found us looking for "96 tall bifold closet doors." This system is built for large architectural openings, not closets, and supports panel heights up to 3800 mm (approx. 149 inches), easily covering 96‑inch tall requirements. It combines structural strength, thermal insulation, and a modern look suitable for upscale residential and commercial projects.
- Frame: 80 mm wide, 2.0 mm thick 6063‑T5 aluminum, with double tempered insulated glass (5 mm+20A+5 mm) filled with argon gas.
- Custom folding layouts (single‑direction, bi‑direction, center opening) sized to match your opening width and height.
- Backed by a 10‑year warranty and certifications (CE, NFRC, AS2047); installation support available in multiple countries.
Product Details
The 80 Series aluminum folding door uses a 80 mm deep frame made from 6063‑T5 aluminum alloy with a 2.0 mm wall thickness—much sturdier than typical interior bifolds. Insulated glazing consists of two 5 mm tempered glass panes separated by a 20 mm argon‑filled cavity and a PVDF aluminum spacer strip. This assembly delivers a U‑factor of 0.28 and a solar heat gain coefficient (SHGC) of 0.22 (based on standard glass; values depend on the final glass choice and testing standard).
Sealing is handled by EPDM rubber gaskets and an internal‑plus‑external gluing process, achieving a water tightness of 350 Pa and wind pressure resistance of 4.5 KPa. Air tightness measures 1.8 (unit pending confirmation; likely m³/(m·h) or m³/(m²·h)). Sound insulation reaches 35 dB, helping to reduce street noise. When open, the panels stack neatly to one or both sides, connecting interior spaces with terraces, pools, or gardens without a lower track obstruction.
Product Features
Energy Performance: With a U‑factor of 0.28 and SHGC of 0.22, the insulated argon‑filled glass helps stabilize indoor temperatures and cut cooling/heating loads. Exact performance depends on glass configuration and applicable rating system—ask for NFRC or AS2047 data.
Weather Resistance: Tested to 350 Pa water tightness and 4.5 KPa wind pressure, the door holds up in rainy and windy sites. Always check wind load requirements for your project location.
Noise Reduction: The 35 dB insulation rating makes it a good choice for busy streets or urban settings; full acoustic test reports (Rw, C, Ctr) can be provided on request.
Hardware Reliability: CMECH handles, hinges, and locking points are designed for smooth folding and secure closure, while bottom‑mounted rollers carry the panel weight without dragging.
Glass Versatility: Beyond the standard double tempered with argon, you can specify Low‑E, laminated, tinted, reflective, insulating double/triple, or even bullet‑proof glass to meet local codes or security needs.
10‑Year Warranty: The system comes with a decade‑long warranty covering manufacturing defects; full terms are provided with the contract, so request a copy before ordering.
Customizable Styles
Folding Layout: Single‑direction, bi‑direction, center opening, and multi‑panel combinations can be arranged to fit your opening width and traffic flow. Each configuration affects panel sizes and hinge load—engineering confirmation is part of the design process.
Frame Colors: Stock options include Caramel Coffee, Deep Coffee, Black Crystal Stone, Quartz Gray, Black Skin. A Starry Black variant may be available upon factory confirmation. Custom powder coating colors can be produced for volume orders.
Glass Types: Standard is 5 mm+20A+5 mm double tempered with argon. Upgrades to Low‑E, laminated, tinted, reflective, insulating double/triple, and bullet‑proof glass are possible; final U‑factor and SHGC will change accordingly.
Dimensions: Single panel width from 500 mm to 850 mm, height from 1900 mm to 3800 mm (covers the 96‑inch tall opening requirement). Exact dimensions are validated per engineering load calculation.
Optional Folding Mesh: A retractable insect screen can be integrated into the system, folding along with the door panels to keep bugs out while allowing ventilation. Mesh specifications are project‑specific.
Hardware Accessories
CMECH Handle: The handle is available in black or silver and shaped for a comfortable grip. The surface resists corrosion, keeping the door’s appearance consistent over years.
CMECH Hinge: High‑cycle hinges in matching finish allow the panels to fold smoothly day after day, with minimal maintenance.
CMECH Locking Point: A specialized multi‑point lock secures the closed panels, adding a layer of security beyond standard latch systems.
Bottom Roller: Precision rollers mounted at the bottom of each panel glide along the track, supporting the glass weight while ensuring quiet operation.
Folding Mosquito Mesh (Optional): The mesh is attached to the same track and folds compactly with the door, so you get bug protection without sacrificing the wide‑open view. Inquire for technical drawings.
Basic Parameters
Performance Item | Available Information | Buyer Notes |
|---|---|---|
Thermal Insulation | U‑Factor 0.28 (based on 5+20A+5 Argon glass) | Value depends on glass type; consult for NFRC/AS2047 ratings. |
Wind Pressure Resistance | 4.5 KPa | Confirm if design pressure or ultimate; suitable for high‑rise projects. |
Water Tightness | 350 Pa | Strong rain resistance; verify drainage details for extreme weather. |
Air Tightness | 1.8 (unit under confirmation, m³/(m·h) or m³/(m²·h)) | Air leakage unit must be verified with test report for energy code compliance. |
Sound Insulation | 35 dB | Typical weighted reduction; request Rw (C;Ctr) numbers if needed. |
Product Specifications
Product Name | 80 Series Aluminum Glass Folding Door |
Frame Material | 6063‑T5 Aluminum, 2.0mm thick |
Frame Width | 80 mm |
Standard Glass | 5mm+20A+5mm Double Tempered, Argon‑filled, PVDF spacer |
Panel Width Range | 500 – 850 mm |
Panel Height Range | 1900 – 3800 mm (suitable for 96‑inch tall openings) |
Hardware | CMECH (handle, hinge, lock) |
Sealing System | EPDM rubber strips, internal external gluing |
Warranty | 10 years |
Customization | Colors, glass, folding styles, sizes – confirmed per project |
Notes | While often searched as “96 tall bifold closet doors,” this is an 80 Series aluminum folding door for large openings, not a closet door. Contact us for project‑specific specifications. |
Advantages
Third‑Party Certifications Certifiable to CE, NFRC, and AS2047 standards, simplifying import requirements in Europe, North America, and Australia. Confirm which certificate your project needs.
Sturdy Construction The 6063‑T5 aluminum frame (2.0 mm wall thickness) combined with internal and external gluing resists deformation and moisture ingress over the years.
Custom Engineering Colors, glass composition, panel sizes, and folding style can all be tailored, backed by CAD drawings and technical reviews.
10‑Year Warranty The warranty covers manufacturing defects; specific coverage terms are detailed in the sales contract, so request a copy for your records.
Multi‑Country Support Installation service is available in select countries including USA, Canada, Australia, and several European nations. Availability and cost vary—please confirm for your region.
Application Scenarios
Apartment Replace a small slider with floor‑to‑ceiling folding panels to open up the entire wall. The unit’s height capability means even a 96‑inch‑tall balcony opening can be used fully, letting light wash into the room and making the apartment feel twice as large.
Home Office A folding glass wall between your office and garden adapts effortlessly. Closed, it blocks 35 dB of outdoor noise so you can focus; open, it merges your workspace with fresh air and greenery for meetings or breaks.
Hotel Use the system as a room divider or event‑space partition. Panels stack to one side to create a wide entrance for banquets, then close to form intimate sections with acoustic separation—all while matching the hotel’s finish standards.
Office Building In conference centers or co‑working spaces, the folding doors let you reconfigure floor plans instantly. The lock point and 35 dB insulation protect confidential discussions, while full‑height glass keeps the interior looking open and professional.
Outdoor For covered pool areas or patio enclosures, the door’s 350 Pa water‑tight rating and corrosion‑resistant aluminum are important. Still, confirm with our engineering team about exposure to saltwater or extreme winds before specifying.
Residential Building Instead of a traditional sliding door, install a folding system to maximize the opening width between living room and balcony. The robust 80 mm frame withstands 4.5 KPa wind loads, giving residents a secure connection to the outdoors.
Exterior When exterior terrace access is critical, the door’s multi‑point lock, insulated glass, and weather seals keep the elements outside. Always check local building code requirements for wind and water performance.
Villa Grand villa entrances with tall 96‑inch openings gain a striking focal point. Full‑height glass panels fold away to combine interior luxury with manicured gardens—and the system’s 3800 mm height capacity means even two‑story porticos can be covered, subject to engineering review.
FAQ
What exactly is this product? Is it a 96‑inch tall bifold closet door?
No. This is an 80 Series aluminum glass folding door for large openings—not a closet door. While it covers 96‑inch heights, it’s built for permanent architectural use in villas, apartments, restaurants, and commercial spaces.
Where can it be used?
It works indoors and outdoors: connecting rooms to balconies, courtyards, or pool decks; dividing hotel halls; or enclosing terraces. Always confirm weather‑resistance details for exterior applications.
Can it be customized?
Yes. Frame color, glass type (Low‑E, laminated, tinted, etc.), panel sizes, folding layout, and optional insect screens can be configured to your project. CAD files are provided during the approval process.
What information is needed for a quotation?
Please send opening width and height, preferred glass/color, folding configuration, and any required certifications (CE, NFRC, AS2047). We’ll return a detailed proposal.
Is this for B2B projects?
Absolutely. Contractors, architects, and distributors can rely on performance‑certified doors. MOQ and lead times are confirmed per order; we support international markets with compliance documentation.
Are technical documents available?
Yes—CAD files, test reports (wind, water, air, thermal, acoustic), and certificates (CE, NFRC, AS2047, etc.) can be shared upon request.
What should buyers confirm before ordering?
Verify exact opening measurements, installation conditions, hardware finish, and the correct air tightness unit (m³/(m·h) or m³/(m²·h)). Also confirm local building codes and energy standards that the door must meet.
Do you provide certifications and international shipping?
We can arrange testing to CE, NFRC, AS2047 standards. Shipping is worldwide, and installation service is available in select countries (USA, Canada, Australia, Europe). Check availability and costs for your region.
