Product Details
These multi slide patio doors combine an ultra-narrow hanging sliding design with structural engineering for projects requiring both visual openness and weather performance. The hidden nine-tier structure integrates progressive wind pressure barriers, making this typhoon resistant door suitable for coastal or high-wind regions. Unlike conventional systems, this configuration suspends panels from an upper track, creating a clean threshold transition with minimal floor obstruction.
The aluminum frame, with a 2.5mm profile thickness and 2.0mm door leaf, supports double tempered argon-filled glass in a 5mm+12A+5mm configuration using a PVDF aluminum spacer. Procurement teams should confirm maximum panel dimensions, applicable market certifications, and available surface finishes before committing to production, as these details vary by project scope.
Product Features
Hidden Nine-Tier Structure: The internal nine-tier design creates multiple progressive barriers against wind pressure, distributing force across several points rather than a single seal. This layered approach helps maintain structural integrity during high-wind events. Buyers in coastal regions should verify this configuration meets local building code requirements for their conditions.
Typhoon and Anti-Fall Protection: Track-mounted anti-balance wheels secure panels against derailment during severe weather, providing both anti-typhoon and anti-fall safety measures. This mechanical retention prevents panels from leaving the track under wind uplift. Confirm wheel specifications match your structural load calculations for the installation environment.
Ultra-Narrow Aesthetic: The hanging sliding configuration achieves minimal visible frame width, maximizing glass area and natural light penetration. This slim profile suits contemporary architecture prioritizing visual transparency. Request section drawings to verify proportions align with your design intent before finalizing specifications.
Advanced Sealing System: EPDM rubber strips and siliconized wool strips from JIANGYINHAIDA create a multi-layer weather barrier addressing air infiltration, water penetration, and thermal bridging. This combination provides consistent compression recovery over extended cycles. Confirm the sealing achieves the air and water ratings your project specifications require.
Energy-Efficient Glazing: Double tempered argon-filled glass with a PVDF aluminum spacer delivers a U-Factor of 0.28 and SHGC of 0.22, supporting energy code compliance in many jurisdictions. Argon gas reduces conductive heat transfer between panes. Verify these thermal values satisfy your local energy codes and discuss alternative glass options for specific climate zones.
Customizable Styles
Glass Options: The standard configuration is double tempered argon-filled glass (5mm+12A+5mm) with a PVDF aluminum strip. Alternative glass types such as low-E coatings, tinted, or laminated options may be available upon request for specific solar control or security requirements. Confirm glass availability and lead times for non-standard configurations with the supplier before specifying.
Frame Options: Aluminum framing with 2.5mm frame profile and 2.0mm door leaf provides structural rigidity. Different thermal break options may be discussable for projects requiring enhanced thermal separation. Verify whether the standard aluminum profile meets your structural and thermal performance targets before finalizing.
Size Options: Maximum panel dimensions are not published and should be confirmed with the supplier. Frame widths of 103mm (two-track) and 149mm (three-track) are established. Provide opening dimensions and wind load requirements so the manufacturer can validate panel sizing and structural adequacy.
Color/Finish Options: Surface treatment and color options are not specified in current documentation. Buyers with aesthetic or architectural requirements should contact the supplier to discuss available powder coating, anodizing, or other finish options and confirm minimum quantities for custom colors.
Track Configuration: Two-track (103mm frame width) and three-track (149mm frame width) configurations are available. Optional hardware packages may offer different feature sets, though exact contents should be verified with the supplier. Clarify panel arrangement and stacking requirements when selecting your track configuration.
Project Customization: OEM or ODM services have not been confirmed. Distributors seeking branded products or modified specifications should discuss requirements directly with the supplier. Custom lead times, minimum quantities, and engineering support for modifications should be confirmed during the quotation process.
Hardware Accessories
Handle: Handle specifications are not detailed in current documentation. The PAG Aluminum Hook Lock serves as the primary locking mechanism. Confirm handle style options, finish selections, and ergonomic requirements with the supplier, especially for accessibility-compliant installations or projects with specific hardware brand preferences.
Rollers: Track-mounted anti-balance wheels function as both the rolling mechanism and the safety retention system against panel derailment. These wheels maintain panel alignment while providing typhoon and anti-fall protection. Request roller load capacity data and confirm suitability for your intended panel weight and operational frequency.
Buffer/Soft-Close System: Soft-close or buffer mechanisms are not explicitly listed in product specifications. Buyers requiring controlled panel deceleration to prevent slamming should confirm availability and compatibility with the selected track and panel configuration during the specification phase.
Lock: The PAG Aluminum Hook Lock provides flush-mounted security with hook-style engagement resisting forced entry attempts. Aluminum construction maintains the door's slim aesthetic profile. Confirm cylinder options, master key compatibility, and whether the lock meets security grade requirements for your project type.
Track System: The upper track serves as both the sliding rail and structural mount for the hanging door panels, with anti-balance wheels integrated. This design eliminates the need for a floor-mounted channel, creating seamless thresholds. Verify track reinforcement requirements based on panel weight and opening width for your installation.
Sealing/Connection Hardware: EPDM rubber strips and siliconized wool strips from JIANGYINHAIDA form the sealing system, providing compression recovery and draft resistance at panel interfaces. The PVDF aluminum strip between glass panes contributes to edge sealing integrity. Confirm gasket replacement availability for long-term maintenance planning.
Basic Parameters
Performance Item | Available Information | Buyer Notes |
|---|---|---|
Thermal Insulation | U-Factor: 0.28 (U.S./1-P), SHGC: 0.22 | Verify these values meet local energy code requirements for your climate zone |
Wind Pressure Resistance | 4.5 Kpa | Confirm this satisfies local structural requirements, especially for high-rise or coastal installations |
Water Tightness | 300 pa | Verify adequacy for project-specific wind-driven rain exposure conditions |
Air Tightness | 4.5 (unit to be confirmed) | Exact measurement unit requires verification; request official test documentation |
Sound Insulation | 30 dB | Confirm whether this meets project acoustic requirements; higher performance may need different glass |
Product Specifications
Item | Details |
|---|---|
Product Name | Multi Slide Patio Doors |
Product Type | Ultra-Narrow Hanging Sliding Door (WT-103) |
Material | Aluminum |
Glass Type | Double Tempered Glass with Argon |
Glass Thickness | 5mm+12A+5mm |
Frame Option | Aluminum (2.5mm frame / 2.0mm door leaf) |
Hardware | PAG Aluminum Hook Lock, Track-mounted anti-balance wheel |
Opening Style | Two Tracks / Three Tracks |
Size Range | To be confirmed with supplier |
Application | Residential and commercial patio and terrace openings |
Customization | Available upon request; confirm with supplier |
Notes | Optional packages (47/70/75/100 Pack) may be available; contents to be verified |
Advantages
Brand Strength: Component sourcing from established suppliers such as JIANGYINHAIDA for gaskets and PAG for locking hardware indicates commitment to reliable sub-assembly quality. Confirm the overall manufacturer's brand credentials, production history, and warranty support directly during your evaluation process.
Factory Capability: The nine-tier structural design and integrated typhoon protection features suggest advanced manufacturing capabilities including precision aluminum extrusion and multi-point sealing assembly. Request factory audit reports to validate production quality systems and capacity for your order volume.
Production Capacity: Specific production capacity data is not published. Buyers with large-scale or phased project requirements should discuss monthly output volumes, production line allocation, and quality control sampling rates directly with the supplier during the procurement process.
Certifications: No product certifications are currently listed. Buyers should confirm whether the required certification documents apply to the selected product configuration and target market, and request third-party test reports to validate the published performance parameters before ordering.
Service Capability: Service and after-sales support structures are not specified. Project buyers should clarify the supplier's capability to provide technical drawings, installation guidance, on-site supervision, and warranty claim processing for their specific market and project scope.
Customization Capability: Track configuration options and hardware package variants are available; however, the extent of OEM or ODM customization is unconfirmed. Discuss feasibility, minimum quantities, and lead time implications for custom dimensions, finishes, or branding directly with the supplier.
B2B Support: Project pricing, volume terms, and logistics coordination should be discussed during quotation. Request clarity on order tracking, quality inspection protocols, and documentation support for customs clearance and site acceptance procedures relevant to your destination market.
Application Scenarios
Apartment: In apartment settings, these multi slide patio doors open living areas to balconies, creating an expanded sense of space. The ultra-narrow profile maximizes natural light in compact floor plans. Confirm water tightness ratings meet balcony drainage requirements and that the track system accommodates existing floor finishes and threshold heights for your specific installation.
Home Office: Home offices benefit from natural light and outdoor visual connection, reducing fatigue. The slim frame maintains professional aesthetics while the 30 dB sound insulation helps manage ambient noise. Verify acoustic performance meets your privacy needs, especially if the outdoor environment is active or near traffic corridors.
Hotel: Hotel installations prioritize guest experience through seamless transitions to pool areas or private terraces. The typhoon-resistant features suit coastal resort properties well. Confirm the lock system meets hospitality security standards and that hardware finishes withstand high-traffic use and regular housekeeping operations.
Office Building: Commercial offices use these doors for conference room partitions or break area connections to outdoor spaces. The clean aesthetic aligns with corporate design standards. Verify compliance with commercial building codes, accessibility requirements, and fire safety regulations for the specific installation location and occupancy type.
Outdoor: For outdoor-facing installations, buyers should confirm weather resistance, water tightness, wind pressure requirements, surface finish durability, and installation conditions before ordering. The 4.5 Kpa wind resistance and 300 pa water tightness provide a baseline, but project-specific environmental loads must be evaluated individually against these values.
Residential Building: Residential buildings benefit from the energy-efficient glazing and robust sealing system, helping reduce heating and cooling costs. The 0.28 U-Factor supports energy code compliance in many regions. Verify the door configuration meets local residential building standards and any applicable homeowner association guidelines.
Exterior: For exterior projects, buyers should confirm weather resistance, water tightness, wind pressure requirements, surface finish longevity, and installation conditions before ordering. The multi-tier wind barrier system provides structural confidence, but each project's exposure conditions require individual assessment against the published performance data.
Villa: Villa projects often feature large openings connecting living spaces to gardens or pool areas. The ultra-narrow frame enhances panoramic views while typhoon protection suits exposed luxury properties. Confirm maximum panel sizes for oversized openings and discuss motorization options for convenient daily operation in high-end residential applications.
Request a Quote
To request a quote for multi slide patio doors, please provide the following information:
Product title and required quantity
Opening dimensions (width and height)
Track configuration preference (two-track or three-track)
Glass requirements and solar control preferences
Hardware and lock specifications
Target market and destination country or port
Certification or compliance documentation needs
Project drawings if available
Our team will review your requirements and provide a detailed quotation covering pricing, lead times, and available customization options for your project.
What to Confirm Before Ordering
Maximum Panel Dimensions: Confirm available panel sizes for your specific opening requirements, as maximum dimensions are not published.
Certifications and Test Reports: Verify that third-party test documentation is available for your target market's building code compliance.
Surface Finishes: Discuss available color and finish options with the supplier, as these are not specified in current documentation.
Hardware Package Contents: Clarify what the optional packages (47/70/75/100 Pack) include before selecting.
Air Tightness Unit: Confirm the exact measurement unit for the 4.5 air tightness value, as the published unit requires verification.
Lead Time and MOQ: Discuss production timelines and minimum order thresholds during the quotation process.
Warranty Terms: Confirm available warranty coverage and duration for your order.
FAQ
What are multi slide patio doors and how do they work?
Multi slide patio doors are large-opening door systems with multiple panels that slide along tracks to create wide, unobstructed openings. This specific model features an ultra-narrow hanging sliding design where panels are suspended from an upper track, combined with a hidden nine-tier structure for wind resistance. Common applications include patio, terrace, and garden access in both residential and commercial projects where seamless indoor-outdoor transitions are desired.
How does this typhoon resistant door perform in high winds?
The door achieves 4.5 Kpa wind pressure resistance through a hidden nine-tier structure with multiple barriers that progressively reduce wind impact. Track-mounted anti-balance wheels prevent panel derailment during severe weather events. Buyers in high-wind or coastal regions should confirm this rating meets their local building code requirements and request official test documentation from the supplier to validate the published performance parameters for their specific project conditions.
What thermal performance do these multi slide patio doors offer?
The system delivers a U-Factor of 0.28 and SHGC of 0.22 with double tempered argon-filled glass in a 5mm+12A+5mm configuration using a PVDF aluminum spacer. These values support energy code compliance in many jurisdictions. Buyers should verify these metrics satisfy their local energy performance requirements and discuss alternative glass configurations for specific climate zones where different solar heat gain or insulation values may be needed.
Can this ultra-narrow hanging sliding door be customized?
Available options include two-track and three-track configurations with corresponding frame widths, plus optional hardware packages. Specific custom dimensions, surface finishes, and OEM or ODM services should be confirmed directly with the supplier. Provide project drawings and performance requirements during quotation to receive accurate customization guidance, lead times, and any applicable minimum order quantities for non-standard specifications.
What information do I need to request a quote?
Provide the product title, required quantity, opening dimensions, preferred track configuration, glass specifications, hardware preferences, target market, destination country or port, and any certification or documentation requirements. Project drawings are helpful for complex installations. The supplier will also need your project timeline to confirm production feasibility, delivery scheduling, and whether any custom specifications affect pricing or lead times.
Does this lift and slide door carry any certifications?
No specific product certifications are currently listed. Published performance values such as the 4.5 Kpa wind resistance and 0.28 U-Factor should be supported by third-party test reports. Buyers should confirm whether the required certification documents apply to their selected product configuration and target market before placing an order, as compliance requirements vary significantly across different regions and building codes.
What sealing system does this door use for weather protection?
The door employs EPDM rubber strips and siliconized wool strips sourced from JIANGYINHAIDA, creating a multi-layer barrier against air and water infiltration. This combination provides consistent compression and recovery performance over extended use. Verify that the sealing configuration achieves the specific air and water tightness ratings your project specifications require, and confirm gasket replacement availability for long-term maintenance planning.
What should I confirm before ordering these multi slide patio doors?
Confirm maximum panel dimensions for your openings, certification and test report availability for your target market, surface finish and color options, hardware package contents, lead times and minimum order quantities, and warranty terms. Request detailed technical drawings and performance documentation to validate that the product meets all project requirements before committing to production, as modifications after manufacturing begins may not be possible.
