Send Us A Message
Product Details
The 136D is a multi-panel overhead concealed sliding door constructed from corrosion-resistant aluminum alloy and 6mm tempered safety glass, designed for both commercial and residential use. Unlike conventional surface-mounted track systems, the overhead concealed mechanism preserves floor space and delivers quiet operation—qualities that position it among the best patio sliding doors for projects where clean aesthetics and functional partitioning are priorities.
Three model tiers—Base, Advanced, and Pro—offer U-Factor ratings from 0.25 down to 0.18 and SHGC values from 0.3 to 0.2, addressing varying energy efficiency demands across climate zones. The water-resistant design suits transitional zones like garage entries, hotel lobbies, and commercial kitchens. Buyers considering a patio door with sidelites or custom partition configuration should confirm panel dimensions and opening sizes with the supplier, as specific dimensions require project-level specification and are not pre-standardized.
Product Features
Corrosion-Resistant Aluminum Frame: The lightweight aluminum alloy frame resists corrosion, performing reliably in high-moisture environments while reducing structural load on building openings. Buyers sourcing the best patio sliding doors for coastal or humid installations should confirm finish durability and local environmental compliance before ordering.
6mm Tempered Safety Glass: Tempered panels provide impact resistance and safety compliance, fracturing into small blunt pieces rather than sharp shards. Buyers specifying an energy efficient sliding door should discuss glass configuration options such as double-glazed upgrades with the manufacturer to meet thermal and acoustic targets.
Overhead Concealed Sliding Mechanism: This system eliminates floor-mounted rails, maximizing usable floor space and creating a minimalist profile. The concealed mechanism operates quietly, suiting noise-sensitive environments. Buyers should verify overhead clearance and structural mounting conditions during the planning phase.
Tiered Thermal Performance: Available in Base (U-Factor 0.25, SHGC 0.3), Advanced (U-Factor 0.21, SHGC 0.25), and Pro (U-Factor 0.18, SHGC 0.2) configurations. Buyers should request test reports to validate performance claims for their specific market and local energy code compliance.
Water-Resistant Design: The water-resistant construction supports installation in wet or transitional zones including garage entries, hotel service areas, and commercial kitchens. Buyers should confirm water tightness grades and installation methods for their specific exposure conditions, as performance varies by configuration.
Multi-Panel Configuration: Supporting multi-panel setups with load capacities from 200kg to 300kg depending on model tier, this multi-panel sliding door adapts to wide openings and flexible space division. Buyers should discuss panel count, stacking arrangements, and structural support details with the supplier.
Customizable Styles
Glass Options: Clear glass maximizes natural light, frosted glass balances privacy with daylight, and tinted glass reduces solar heat gain while providing visual screening. Buyers of the best patio sliding doors should confirm glass availability by model tier and local safety glazing code compliance.
Frame Options: The aluminum alloy frame provides a lightweight, corrosion-resistant structure. Buyers seeking a single door patio door or multi-panel setup should discuss frame profile dimensions and thermal break options with the supplier to ensure the frame meets project load and insulation requirements.
Size Options: Specific dimensions are not standardized and must be confirmed per project. Buyers should provide opening width, height, and clearance details when requesting a quote, as custom sizing may affect lead time, pricing, and model tier availability.
Color/Finish Options: Frame colors include Black, White, and Wood Finishes, complementing architectural styles from contemporary to traditional. Buyers should request physical color samples and confirm UV resistance ratings for their climate before finalizing selections for the best patio sliding doors.
Track or Opening Configuration: The overhead concealed system supports various panel arrangements. Buyers should specify opening direction, panel count, and stacking configuration during quotation. Ceiling structural conditions and mounting height must be confirmed for track mechanism compatibility.
Project Customization: For large-scale developments, project-specific customization may include custom colors, glass types, and hardware finishes. Buyers working with a best patio sliding doors manufacturer should discuss OEM/ODM availability, minimum order quantities, and customization lead times directly with the supplier.
Hardware Accessories
Handle: Finish options include Brushed Stainless Steel and Polished Aluminum, selected for durability and aesthetic versatility. Buyers specifying the best patio sliding doors should confirm handle style availability, ergonomic needs, and lock integration options for their target market.
Rollers: The sliding system uses rollers designed for smooth, quiet movement along the overhead concealed track. Buyers should inquire about roller material specifications, expected cycle life, and replacement availability, as these details affect long-term maintenance planning for commercial installations.
Buffer/Soft-Close System: Controlled sliding speed (0.5–0.7 m/min by model) suggests the system may include deceleration functionality—buyers should confirm with the supplier. Buffer systems prevent panel impact at end-stops, reducing wear and noise in the best patio sliding doors.
Lock: Security locking mechanisms are critical for both residential and commercial installations. Specific lock type and grade information should be confirmed. Buyers sourcing the best replacement sliding patio doors should discuss multi-point locking and forced-entry resistance ratings with the supplier.
Track System: The overhead concealed track is the defining hardware component, enabling space-saving, silent panel movement. Track length and mounting requirements vary by project. Buyers must confirm structural loading capacity of the mounting surface and track accommodation for the desired panel count and weight.
Sealing/Connection Hardware: Weather stripping, inter-panel seals, and threshold components contribute to water resistance, air tightness, and acoustic performance. Buyers should request seal material details and replacement schedules compatible with their climate zone performance demands for the best patio sliding doors.
Basic Parameters
Performance Item | Available Information | Buyer Notes |
|---|---|---|
Thermal Insulation | U-Factor 0.18–0.25 (Pro to Base) | Select tier based on local energy code; request test reports for compliance |
Wind Pressure Resistance | Not specified in current documentation | Confirm project-specific wind load requirements with supplier |
Water Tightness | Water-resistant design confirmed | Verify specific water tightness grade for exposure conditions |
Air Tightness | Not specified in current documentation | Request air infiltration data for energy compliance documentation |
Sound Insulation | Not specified; overhead mechanism reduces operational noise | Acoustic performance data should be confirmed with supplier |
Product Specifications
Item | Details |
|---|---|
Product Name | 136D Contemporary Glass and Aluminum Garage Door |
Product Type | Multi-Panel Overhead Concealed Sliding Door / Partition Door |
Material | Corrosion-Resistant Aluminum Alloy |
Glass Type | Tempered Safety Glass |
Glass Thickness | 6mm |
Frame Option | Aluminum Alloy (Black, White, Wood Finishes) |
Hardware | Brushed Stainless Steel / Polished Aluminum |
Opening Style | Overhead Concealed Sliding |
Size Range | Confirm with supplier per project |
Application | Commercial and Residential |
Customization | Glass type, frame color, hardware finish; project options available upon request |
Notes | Model tiers (Base/Advanced/Pro) affect U-Factor, SHGC, load capacity, and sliding speed |
Advantages
Brand Strength: CPR, CE, AS2047, and EN 14351 certifications demonstrate international compliance, providing B2B buyers confidence that the product meets regulatory requirements in multiple markets. Buyers should confirm certifications apply to their selected configuration and target market before committing.
Factory Capability: Production capabilities should be confirmed with the supplier. Buyers evaluating a best patio sliding doors manufacturer should request factory audit reports and quality control documentation to assess reliability for large-scale project fulfillment.
Production Capacity: Volumes and lead times depend on order complexity, customization level, and material availability. Buyers should discuss production scheduling and batch size flexibility during quotation to align delivery with project timelines.
Certifications: The product holds CPR, CE, AS2047, and EN 14351 certifications. AS2047 is the Australian standard for windows and doors in buildings; EN 14351 covers pedestrian doorsets in Europe. Buyers must verify certifications are current and applicable to their configuration and market.
Service Capability: Warranty terms, technical assistance, and spare parts availability should be confirmed. For commercial projects, service level agreements and response commitments are important. Buyers should negotiate service terms during the procurement process for the best patio sliding doors.
Customization Capability: Glass type, frame color, hardware finish, and model tier options are available. Additional project customization may be possible upon request. Buyers should discuss limits, cost impacts, and lead time extensions with the supplier.
B2B Support: For commercial contractors and developers, support includes bulk pricing discussion, project coordination, and documentation assistance. Buyers should confirm the supplier can provide shop drawings, installation guides, and compliance documentation for local building submissions.
Application Scenarios
Apartment: Space efficiency and noise control are primary concerns in apartment living. This overhead concealed sliding door saves floor space compared to swing doors, suiting compact layouts where every square meter matters. Tempered glass allows natural light flow while the mechanism operates quietly. Buyers selecting the best patio sliding doors for apartments should confirm panel dimensions for standard residential openings and verify acoustic performance for shared-wall applications.
Home Office: Home offices need visual privacy and acoustic separation without sacrificing daylight. Frosted or tinted glass provides screening from household activity while the silent sliding mechanism avoids work disruptions. Buyers should confirm glass privacy levels and whether lock options support secure areas. A single door patio door configuration may suit smaller home office openings.
Hotel: Hotels demand durable, water-resistant doors for lobbies, service corridors, and kitchen transitions. The corrosion-resistant aluminum frame and water-resistant design suit high-traffic hospitality environments. The concealed track maintains a clean aesthetic expected in hotel design. Buyers sourcing the best patio sliding doors for hotel projects should verify fire-rated door requirements separately, as this product does not carry specific fire resistance ratings.
Office Building: Commercial offices benefit from flexible space division that accommodates changing team sizes and meeting needs. Multi-panel sliding configurations allow wide openings to be opened or closed as required. Tiered thermal performance supports energy code compliance. Buyers should confirm load capacity ratings for large panels and discuss integration with building management systems if automated operation is desired.
Outdoor: For outdoor or exterior-related projects, buyers should confirm weather resistance, water tightness, wind pressure requirements, surface finish durability, and installation conditions before ordering. While the product features a water-resistant design, full exposure to elements may require additional specifications. Buyers should discuss threshold design, drainage provisions, and UV resistance of frame finishes with the supplier.
Residential Building: Residential buildings ranging from townhomes to luxury apartments benefit from the space-saving design and thermal efficiency. The range of frame colors and glass types allows architects to match diverse interior schemes. Buyers should coordinate panel sizes with standard residential openings and confirm whether installation support is available from the supplier for construction teams.
Exterior: For exterior-facing installations, the water-resistant design and corrosion-resistant frame provide a starting point, but specific exposure conditions vary by site. Buyers should confirm wind load ratings, water tightness grades, and thermal performance for their climate zone. Those seeking sliding glass doors houston or similar warm-climate applications should discuss solar heat gain management and high-humidity performance with the manufacturer before specifying.
Villa: Villas often feature large openings connecting interior living spaces to gardens or patios. The multi-panel configuration and Pro model thermal performance (U-Factor 0.18, SHGC 0.2) make it suitable for expansive installations where energy efficiency and aesthetic quality are equally important. Buyers should confirm maximum panel dimensions for large villa openings and discuss hardware finishes complementing high-end interior schemes for the best patio sliding doors.
Request a Quote
To request a quote for the best patio sliding doors, please provide the following information:
Product title and quantity
Opening dimensions (width and height)
Desired model tier (Base, Advanced, or Pro)
Glass type preference (Clear, Frosted, or Tinted)
Frame color selection (Black, White, or Wood Finishes)
Hardware finish preference
Target market and destination country or port
Certification or documentation requirements
Project drawings if available
As a best patio sliding doors manufacturer, the supplier can also discuss OEM/ODM options, bulk pricing, and project-specific customization upon request.
What to Confirm Before Ordering
Product Dimensions: Confirm opening width, height, and ceiling clearance for overhead track mounting with the supplier, as specific size ranges are not pre-standardized.
Model Tier Selection: Verify U-Factor, SHGC, and load capacity requirements against local energy codes and structural demands before choosing Base, Advanced, or Pro.
Certification Applicability: Confirm that CPR, CE, AS2047, or EN 14351 certifications apply to your selected configuration and are accepted by your local building authority.
Warranty and Service Terms: Discuss warranty coverage, technical support availability, and spare parts supply with the supplier before placing an order.
MOQ and Lead Time: Confirm minimum order quantity and production lead time to align delivery with your project schedule.
OEM/ODM Requirements: If custom branding is needed, discuss availability, MOQ, and any impact on certifications and lead time.
FAQ
What makes this one of the best patio sliding doors for commercial projects?
The 136D combines a corrosion-resistant aluminum alloy frame, 6mm tempered safety glass, and an overhead concealed sliding mechanism that saves floor space and operates quietly. It offers tiered thermal performance with U-Factors from 0.18 to 0.25 and SHGC values from 0.2 to 0.3, plus CPR, CE, AS2047, and EN 14351 certifications. Commercial buyers should confirm model tier availability, panel dimensions, and lead times for their specific project requirements with the supplier.
Can this product serve as best replacement sliding patio doors?
Yes, provided the existing opening accommodates the overhead track mechanism and structural mounting requirements. Buyers should measure existing opening dimensions, ceiling clearance, and structural support capacity before ordering. Retrofit installation may require modifications to the header or surrounding structure, so consulting with the supplier's technical team during the planning phase is recommended to avoid unexpected construction adjustments.
Is this suitable as a patio door with sidelites configuration?
The multi-panel sliding system can potentially integrate fixed sidelites alongside operating panels, depending on project layout and structural conditions. Buyers should discuss sidelite integration, frame joint details, and visual alignment with the supplier. Custom configurations may affect lead time and pricing, so early specification during the design phase is advisable to ensure coordinated delivery and installation.
What certifications does this door hold?
The product holds CPR, CE, AS2047, and EN 14351 certifications. AS2047 is the Australian standard for windows and doors in buildings, while EN 14351 is a European standard for pedestrian doorsets. CPR and CE apply to the European market. Buyers should confirm that certifications are current, applicable to their selected model tier and configuration, and accepted by their local building authority before placing an order.
What glass options are available for this overhead concealed sliding door?
Three glass types are offered: Clear for maximum natural light, Frosted for privacy with daylight transmission, and Tinted for solar heat gain control and visual screening. All use 6mm tempered safety glass. Buyers should verify glass availability by model tier and confirm compliance with local safety glazing codes, particularly for applications near walkways or in high-traffic commercial areas.
What is the load capacity of the best patio sliding doors?
Load capacity varies by model tier: Base supports up to 200kg, Advanced up to 250kg, and Pro up to 300kg. The appropriate tier depends on panel size, glass configuration, and structural requirements. Buyers should calculate anticipated panel weights and confirm the selected tier provides adequate capacity with an appropriate safety margin for their specific installation conditions and usage frequency.
What information is needed to request a quotation?
Provide the product title, required quantity, opening dimensions (width and height), desired model tier, glass type preference, frame color, hardware finish, target market and destination port, any certification requirements, and project drawings if available. Buyers should also confirm minimum order quantity, lead time, and warranty terms during the quotation process to ensure complete project planning.
Can this door be used in wet areas like commercial kitchens?
The water-resistant design supports installation in wet or transitional zones, though specific water tightness grades should be confirmed with the supplier for the intended application. Buyers should also verify that hardware finishes resist corrosion from cleaning chemicals or food preparation environments, and discuss any hygiene-related requirements during specification. FDA or food-contact certifications have not been confirmed for this product.
Is OEM or ODM service available from this best patio sliding doors manufacturer?
OEM and ODM capabilities are not confirmed in current product documentation. Buyers interested in custom branding, label design, or modified specifications should discuss these requirements directly with the supplier. Minimum order quantities for OEM or ODM orders, if available, should be confirmed along with any impact on lead time, pricing, and certification applicability for the rebranded product.
What are the sliding speed specifications?
Sliding speed ranges from 0.5 m/min on the Base model, 0.6 m/min on the Advanced model, to 0.7 m/min on the Pro model. These controlled speeds contribute to quiet operation and may be associated with soft-close or deceleration features. Buyers should confirm whether buffer or soft-close systems are included as standard or optional equipment on their selected model tier.
