The aluminum glass swing door functions as a swinging bar room door for high-traffic commercial interiors. Its 6063-T5 aluminum frame handles daily use in bars, restaurants, and hospitality spaces, while the dual-opening design adapts to both inward and outward traffic flow.
- Glass Options: Double glazing (5mm+12A+5mm) or 8mm tempered single glass
- Custom Dimensions: Width 600–850 mm, height 1800–2500 mm
- Weather Sealing: EPDM rubber strip for consistent air and water tightness
Product Details
For bar and restaurant settings, the’s glued leaf assembly keeps the door rigid through frequent swings. The inward/outward opening allows flexible layout without taking up floor space. Aluminum withstands dampness and cleaning better than wood, suiting long service life.
When fitted with double glazing, this door cuts sound by 37 dB and achieves a U-factor of 0.39, helping temper interior comfort and energy costs. Buyers should verify test standards and glass configuration details with the supplier.
Product Features
Bi-Directional Opening: The door swings in or out, a practical feature for busy bar corridors where staff and guests need unobstructed movement.
Gluing Process for Leaf Rigidity: The opening panel uses a gluing process that adds structural strength and reduces glass rattling over long-term high-frequency use.
EPDM Rubber Seals: Continuous EPDM gaskets seal against water ingress (300 Pa) and air leakage, keeping conditioned air inside.
6063-T5 Aluminum Profiles: Extruded aluminum with 1.45mm frame thickness resists corrosion in humid bar environments, outlasting steel or wood alternatives.
DERCHI Custom Hardware: Purpose-matched DERCHI handles and hinges deliver uniform appearance and smooth operation across all doors in a project.
Double Glazing Sound Reduction: With 5mm+12A+5mm insulated glass, the door achieves 37 dB sound insulation—keeping bar room conversations private and outside noise at bay.
Customizable Styles
Glass Configuration: Pick double glazing for thermal and acoustic performance, or 8mm tempered single glass for a leaner budget. Frosted, tinted, or patterned glass can be ordered, subject to confirmation.
Frame Finish: Standard anodized silver or powder-coated colors (black, bronze, etc.). Custom RAL colors available with minimum order quantity.
Opening Direction: Specify left or right hand, inward or outward swing to match your bar layout and traffic pattern.
Dimensions: Any width 600–850mm and height 1800–2500mm is possible; non-standard sizes reviewed on a case‑by‑case basis.
Decorative Options: Mullion patterns or sandblasted glass designs may be available; confirm artwork feasibility and lead time.
Hardware Accessories
DERCHI Custom Handle: Ergonomically shaped for a comfortable grip, finished to match the door design. Solid construction stands up to heavy bar-room use.
DERCHI Custom Hinges: Heavy-duty adjustable hinges support the aluminum leaf and allow fine alignment after installation, reducing maintenance visits.
Locking Options: Mortise locks or magnetic catches can be integrated; keyed-alike systems simplify staff key management across multiple openings.
Hydraulic Door Closer (Optional): Concealed or surface-mounted closers for hands-free operation; verify compatibility with opening direction and leaf weight.
EPDM Gasket Set: Pre‑cut continuous strips deliver the full sealing system; replacement sets available for long-term maintenance.
Basic Parameters
Performance Item | Available Information | Buyer Notes |
|---|---|---|
Thermal Insulation | U-Factor 0.39 (double glazing) | Confirm unit (likely W/m²·K) and exact glass configuration used. Request whole‑door NFRC or equivalent rating. |
Wind Pressure Resistance | 3 KPa | Verify unit is kPa; ask for test standard and safety factor. Important for high‑rise interior pressure differentials. |
Water Tightness | 300 Pa | Ask for test standard (e.g., EN 12208) and pressure cycling details to ensure suitability for wet areas. |
Air Tightness | 5 m³/(m²·h) | Confirm reference pressure (e.g., 100 Pa) and standard (EN 12207) to evaluate HVAC efficiency gains. |
Sound Insulation | 37 dB | Ask if value corresponds to Rw, STC, or OITC, and whether it applies to the double‑glazed configuration. |
Product Specifications
Specification | Detail |
|---|---|
Product Model | P50 |
Product Type | Aluminum Glass Swing Door |
Opening Direction | Open externally / Open internally |
Frame Material | 6063‑T5 Aluminum Alloy |
Profile Thickness | Frame 1.45mm, Leaf 1.2mm |
Frame Width | 54mm |
Glass Options | Double glazing (5mm+12A+5mm) or 8mm tempered single glass |
Sealing Material | EPDM Rubber Strip |
Hardware | DERCHI custom handle & hinges |
Width Range | 600 – 850 mm |
Height Range | 1800 – 2500 mm |
Assembly Process | Leaf: gluing process; Fixed panel: pressing glue strip |
Packaging | Export plywood crate or carton (method confirmed before shipment) |
Certification | Test reports available upon request; confirm project requirements |
Advantages
Proven Performance Data: Documented U‑factor, SHGC, and acoustic figures back up this model’s real-world thermal and sound performance, helping specifiers run accurate energy and comfort calculations.
Aluminum Durability in Wet Areas: 6063‑T5 frames with EPDM seals stand up to moisture and cleaning chemicals, extending service life in bars and restaurants where spills occur frequently.
DERCHI Hardware Consistency: Custom-matched handles and hinges from a single supplier streamline procurement and keep look-and-feel uniform across an entire project.
Two-Step Assembly Quality: Gluing the leaf and pressing the fixed panel’s rubber strip produce a rigid, weather-tight assembly—a process step many budget doors skip.
Flexible Opening Configuration: Left/right handing, inward/outward swing, and a width-range of 600–850mm adapt the door to renovation plans without major structural changes.
Application Scenarios
Apartment: For apartment bedrooms or kitchens, this swing door cuts noise by 37 dB while glass panels keep the floor plan light and open. Custom sizing suits non-standard openings typical in renovations.
Home Office: Between a living zone and workspace, the door creates acoustic privacy during calls while keeping the space visually connected. Large glass panes and double glazing help lower utility bills.
Hotel: As a bathroom entry or room divider, the smooth swing and quiet closing add to guest comfort. The aluminum frame withstands frequent cleaning and resists bathroom humidity.
Office Building: In conference rooms or executive suites, the door separates sound while glass panels keep the space from feeling boxed in, fitting open-plan corporate cultures.
Outdoor: In a protected terrace or shaded beer garden entrance, the door links indoor and outdoor dining. Verify local wind load and water tightness requirements with the supplier, and confirm hardware corrosion resistance.
Residential Building: As a private unit entry on an internal corridor, this swinging bar room door brings a contemporary look and solid thermal performance. Double glazing cuts corridor noise and helps regulate temperature.
Exterior: Inside a sheltered balcony opening within a recessed façade, the door benefits from 300 Pa water tightness and 3 kPa wind resistance. Confirm project-specific exposure classification and flashing details before finalizing.
Villa: In an open-plan villa, the door can separate a living zone from a private bar area or wine cellar. Custom finishes and glass types align with high-end interiors, and the aluminum build delivers lasting quality.
FAQ
What is a swinging bar room door?
It's an aluminum glass swing door built for interior partitions in bars, restaurants, and similar spaces. The model includes dual-opening capability, verified thermal performance, and customizable sizes for high-traffic hospitality.
Where can these swinging bar room doors be used?
Most often in interior settings: bar room partitions, restaurant seating areas, hotel corridors, offices, and residential spaces. For sheltered exterior spots, confirm weather resistance with the supplier.
Can the door be customized?
Yes. You can adjust width (600–850mm), height (1800–2500mm), glass type, opening direction, frame finish, and hardware. Options like frosted glass or custom colors may be subject to minimum order quantity.
What information is needed for a quote?
Provide required door width and height, glass preference, opening direction (left/right, inward/outward), quantity, target market, and any certification requirements. Including a project drawing helps the supplier offer accurate pricing and lead time.
Can these doors be used for B2B projects such as bars or hotels?
Definitely. The’s aluminum construction and documented U-factor, SHGC, and acoustic values suit commercial procurement. Bulk orders often benefit from consistent hardware and coordinated factory scheduling.
Are technical documents or test reports available?
Yes, test reports covering water tightness, air tightness, wind pressure, sound insulation, and thermal performance can be shared. Tell the supplier which standards (EN, ASTM, etc.) your project needs.
What should buyers confirm before ordering?
Check opening direction and handing, glass configuration (low-e coating if required), finish color, and whether your measurements are rough opening or door leaf size. Also confirm packaging and on-site delivery constraints.
How should I confirm certification, packaging, shipping, or compliance details?
Contact the supplier with your target market and local building codes. They can advise on packaging (typically export plywood crates), provide compliance documentation, and arrange shipping terms according to your order volume.
