The DERCHI P103 aluminum swing door for residential buildings is a custom-engineered entry solution balancing thermal performance, security, and adaptable design. Built on a 6063-T5 aluminum frame with triple EPDM seals and multi-point locking, it serves apartments, villas, and light commercial entries. Projects benefit from made-to-order flexibility and inquiry-based procurement.
- Triple EPDM seals and four‑side six‑point lock enhance weather resistance and forced‑entry protection.
- Standard double tempered insulating glass with argon fill achieves U‑Factor 0.38 and wind resistance of 5,000 Pa.
- Size, glass, finish, and hardware are confirmed per project drawings for seamless architectural integration.
Product Details
The P103 aluminum swing door for residential buildings features a 2.0 mm 6063‑T5 aluminum frame with a 103 mm wide profile and a 35 mm BAIYUNYILE polyamide thermal break. Triple EPDM seals, an injected‑glue sash assembly, and pressure‑strip glazing combine to deliver an air‑tight unit that manages thermal bridging and reduces condensation risk in humid or coastal climates.
Unlike commodity doors, this hinged door integrates a four‑side six‑point locking system and is tested to 5,000 Pa wind pressure and 450 Pa water tightness under standard configuration. The swing operation suits tight hallways and balcony transitions, while customizable sizing (up to 1,200 × 2,800 mm per leaf) allows replacement projects without altering structural openings. Performance values are based on the standard 5+27A+5 insulated glass; alternate glass packages require separate engineering evaluation.
Product Features
Thermally Broken Frame: 35 mm BAIYUNYILE polyamide strip and 6063‑T5 aluminum lower heat transfer, helping meet energy codes and trim HVAC loads in residential buildings.
Triple EPDM Weather Seal: Continuous gaskets around the sash suppress drafts, dust, and driving rain, keeping interior finishes protected year‑round.
Six‑Point Locking Security: Four‑side multi‑point engagement reinforces the door against prying and deformation, a meaningful upgrade over basic twin‑bolt systems.
Custom Glass Integration: Choose double or triple tempered, laminated, Low‑E, or tinted glass; built‑in blinds can be added within the insulating cavity without surface clutter.
Corrosion‑Resistant Hardware: Standard ShenZhen HOPE stainless‑style handle and hinge pair with optional HOPPE locks, ensuring consistent operation in saline or high‑humidity air.
Project‑Ready Submittals: Factory provides CAD, BIM, NFRC/CE/CSA files, and thermal reports so architects and builders can verify compliance before order.
Customizable Styles
Glass Configuration: Standard 5 mm + 27A + 5 mm insulating glass with argon; upgrade to triple, laminated, Low‑E, reflective, or tinted panes based on thermal or acoustic goals.
Frame Finish: Powder coating, anodized wood grain, or PVDF in a wide RAL palette — specify swatches for coastal or high‑UV environments.
Opening Type: Single leaf, double leaf, or French door (mother‑and‑child) layout, available as inward or outward swing to match egress and local building code.
Size Flexibility: Sash widths from 350 mm to 1,100 mm and heights up to 2,800 mm accommodate existing openings; larger configurations can be discussed with engineering.
Integrated Blinds: Magnetic‑controlled or electric blinds housed inside the glass unit maintain a clean look and simplify cleaning in residential projects.
Hardware Accessories
ShenZhen HOPE Handle & Hinge: Stainless‑look lever and heavy‑duty column hinge deliver smooth swing motion and consistent latching for daily residential use.
HOPPE Hardware Upgrade: Optional German‑brand handle, hinge, and lock sets available for projects requiring recognizable hardware branding.
Multi‑Point Lock Options: Mechanical key lock, fingerprint combination lock, or barrel‑style multi‑point lock — hardware is matched to door height and leaf weight.
EPDM Gasket Kit: Full‑perimeter rubber seals on head, jamb, and sill; replacement profiles are stocked for long‑term maintenance coverage.
Sill & Drainage: Low‑threshold aluminum sill with integrated weeps can be specified; drainage capacity and shape are confirmed per project exposure.
Basic Parameters
Performance Item | Available Information | Buyer Notes |
|---|---|---|
Thermal Insulation | U‑Factor 0.38 | Based on standard 5+27A+5 insulated glass; request NFRC‑simulated values for alternative glass packages. |
Wind Pressure Resistance | 5,000 Pa (5 kPa) | Adequate for high‑rise and coastal facades; confirm against local wind load codes and project height. |
Water Tightness | 450 Pa | Controls driving rain when drainage is correctly designed; provide exposure category for monsoon zones. |
Air Tightness | 4.5 m³/(m·h) | Minimizes drafts and dust ingress; value may shift with oversized panels — request assembly‑specific data. |
Sound Insulation | 30 dB | Test configuration used standard double glazing; laminated or thicker glass can improve acoustic performance. |
Product Specifications
Specification | Detail |
|---|---|
Product Name | DERCHI P103 Series Aluminum Swing Door For Residential Buildings |
Product Type | Aluminum swing door / hinged entry door / French door |
Frame Material | 6063‑T5 aluminum alloy |
Profile Thickness | 2.0 mm |
Frame Width | 103 mm |
Insulation Strip | 35 mm BAIYUNYILE polyamide (thermal break) |
Standard Glass | 5 mm + 27A + 5 mm double tempered insulating, argon fill, PVDF aluminum spacer |
Sealing System | Triple EPDM rubber gaskets |
Locking Points | Four‑side six‑point locking |
Standard Hardware | ShenZhen HOPE double‑sided handle, column hinge |
Opening Styles | Single leaf, double leaf, French door (mother‑and‑child); inward or outward |
Sash Width Range | 350 – 1,100 mm |
Sash Height Range | 800 – 2,800 mm |
Single Leaf Max | ~1,200 mm × 2,800 mm, ~150 kg |
Customization | Dimension, color, glass, hardware, grille, blinds, packaging |
Notes | Final specifications confirmed per project order. Certifications (NFRC, CE, AS2047, CSA, ISO9001) mentioned; confirm scope for chosen configuration. |
Advantages
Engineered for residential facades: 0.38 U‑Factor and 5 kPa wind resistance reduce energy demand and structural load without over‑engineering.
Custom‑built to site conditions: sash dimensions, threshold, and drainage are adapted from field measurements, not off‑the‑shelf sizes.
Project documentation included: submittals, shop drawings, CAD/BIM files, and thermal reports streamline architect and contractor approval.
Multi‑point lock and EPDM triple seal raise both security and weather endurance, lowering call‑back rates on completed installations.
20+ years of export manufacturing experience supports OEM labeling, bulk packaging, and staged delivery schedules for overseas developers.
Application Scenarios
Apartment: Slim profiles save floor area while triple seals control air leakage between conditioned interiors and open balconies — important for multi‑story energy compliance.
Home Office: A quiet swing door with 30 dB insulation helps separate work zones from living areas; custom grille designs can match interior millwork.
Hotel: Consistent swing action and optional fingerprint lock suit guest room balconies; factory‑applied PVDF finish endures frequent cleaning and coastal salt spray.
Office Building: Heavy‑traffic entrance with HOPPE hardware and reinforced hinge provides durability; double‑leaf option accommodates wide lobby openings.
Outdoor: Confirm water tightness and corrosion‑resistant hardware for exposed terraces; ask for drainage detail and wind load analysis if the site faces prevailing storms.
Residential Building: The swing door integrates with cavity walls or curtain wall systems; thermal break performance supports whole‑building energy certification efforts.
Exterior: Use laminated glass and additional weep slots for fully open elevations; project‑specific testing is recommended when exposure exceeds 5 kPa wind pressure.
Villa: French‑door configuration with Low‑E insulating glass opens onto gardens while maintaining interior comfort; custom anodized wood grain matches window frames.
Inquiry Guidance
To request a quote, please share your project location, required size, quantity, preferred frame color, glass type, hardware requirements, and drawings or reference photos if available.
FAQ
What is the DERCHI P103 aluminum swing door for residential buildings?
It is a custom‑engineered aluminum swing door system with a thermally broken frame, triple EPDM seals, and multi‑point locking, designed for performance‑driven residential entry and balcony applications.
Can the size be customized beyond the listed sash range?
Yes, dimensions outside 350–1,100 mm width or 800–2,800 mm height can be discussed. Submit site measurements for engineering review and feasibility confirmation.
How do I get a quote for my project?
Provide size, leaf configuration, glass type, frame finish, hardware preference, and approximate quantity. We return a tailored quotation with drawings, performance data, and lead‑time estimate.
What certifications apply to this aluminum swing door?
NFRC, CE, AS2047, CSA, and ISO9001 are referenced. Buyers should confirm that the required certificate covers the specific glass and hardware combination for their target market.
How long does it take to produce a custom order?
Production lead time depends on order volume and customization complexity. A detailed schedule is provided with the quote; made-to-order processing starts after drawing approval.
Do you provide installation support or guides?
We supply installation manuals, shop drawings, and can advise on anchorage and sealing. On‑site support may be arranged for larger B2B projects upon request.
Is there a minimum order quantity for OEM projects?
MOQ is defined per product specification and packaging requirement. Share your project brief to receive a quantity recommendation and adjusted unit pricing.
